Installation and Conversion Instructions

Macan (95B)
8/22

ENU

2635

2

Sports Tailpipe, Single-Branch – Silver (0P3)/Black (0P6)

Vehicle Type:

Macan

Model Year:

As of 2022

Engine Types:

DMT (basic engine) = 4 cylinder inline / 2.0 liter / 195 kW (265 hp)
•

Information:

DMTD with performance class D3Q = 195 kW (265 hp)

Retrofitting
Information

Figure 1
Notes:

The standard exhaust system tailpipes can be replaced with sports tailpipes ( Figure 1) on the vehicles
specified above.
The tailpipes can be retrofitted worldwide and are also available for new vehicles straight from the factory
by requesting optional equipment "I-no. 0P3" = Silver or "0P6" = Black.

Parts Info:

95B.044.205

 Sports tailpipe, silver, set

95B.044.205.A

 Sports tailpipe, black, set

Tequipment

Jun 15, 2022
Page 1 of 6

2

Macan (95B)
2635

ENU

Installation and Conversion Instructions

8/22

Parts List:

Figure 2
Sports tailpipe – silver chrome-plated (0P3), set:
95B.253.681.AK1

1x

Sports tailpipe – left  Figure 2 -1-

95B.253.682.AG1

1x

Sports tailpipe – right  Figure 2 -2-

999.073.594.01

4x

Flat-head screw, M6 x 12 PA  Figure 2 -3-

Sports tailpipe – black chrome-plated (0P6), set:
999.073.594.01

4x

Flat-head screw, M6 x 12 PA  Figure 2 -3-

95B.253.681.AQ1

1x

Sports tailpipe – left  Figure 2 -4-

95B.253.682.AH1

1x

Sports tailpipe – right  Figure 2 -5-

1

ONLY contained in respective set!

Information
ONLY in the event of repairs/replacement:
Items WITHOUT a part number in the parts list can be found/ordered from the Porsche Electronic Parts
Catalog = PET.
Check model year and vehicle equipment (I-no.) in the standard catalog!

Jun 15, 2022
Page 2 of 6

Tequipment

Installation and Conversion Instructions
9900 - PIWIS Tester 3

Tool:

Macan (95B)
8/22

ENU

2635

2

Flashlight

VAG 1783 - Torque wrench or equivalent
1

Assembly:

Preparatory work
1.1

Drive the vehicle onto a lifting platform and connect a battery charger.  Workshop Manual
'2X00IN Battery trickle charge'

1.2

Raise the vehicle.  Workshop Manual '4X00IN Lifting the vehicle'

CAUTION
Hot components
•

Risk of burns



Let hot components cool down.



Wear personal protective gear.

2

1.3

Remove standard tailpipe.  Workshop Manual '263519 Removing and installing tailpipe
cover'

1.4

Clean rear silencer connection piece with sandpaper if necessary.

Install sports tailpipe
2.1

Carefully guide sports tailpipe (left/right) through the cut-out on the rear bumper and as far
as the mechanical stop onto the rear silencer connection piece.
Information
The tailpipes are adjusted in X direction using the slots in the tailpipe.

2.2

Check projection of tailpipe cover on sports tailpipe (left/right) / cover on exhaust system
(rear apron) and adjust evenly.

2.3

Tighten countersunk screw M6 x 12 (on underside of cover on sports tailpipe).
Tightening torque 8 Nm (5.9 ftlb.) +/-1 Nm (0.7 ftlb.)

NOTICE
Voltage drop
•

Risk of irreparable damage to control unit

•

Risk of damage to control unit

•

Fault entries in the control unit

•

Coding in the control unit is aborted

Tequipment

Jun 15, 2022
Page 3 of 6

2

Macan (95B)
2635

ENU

8/22

Installation and Conversion Instructions

•

Malfunctions in control unit, even during programming



Switch off the ignition and remove the ignition key before disconnecting the control unit.



Ensure that the power supply is not interrupted during programming.



Connect a battery charger with a current rating of at least Nominal value 90 A to the vehicle battery.

Coding:

3

Entering the sports tailpipe (0P3 or 0P6) in the vehicle data
3.1

Preparatory work – Coding
NOTICE

Control unit programming will be aborted if the Internet connection is unstable.
•

An unstable Internet connection can interrupt communication between PIWIS Tester
III and the vehicle communication module (VCI). As a result, control unit programming
may be aborted.



During control unit programming, always connect PIWIS Tester III to the vehicle
communication module (VCI) via the USB cable.
3.1.1

Connect 9900 - PIWIS Tester 3 to the vehicle and switch it on.

3.1.2

Switch on ignition AND hazard warning lights on the vehicle.
Information
The 9900 - PIWIS Tester III instructions take precedence since the description
may be different with later Tester releases.
The procedure described here has been structured in general terms; different text
or additions may appear on the 9900 - PIWIS Tester III.

3.1.3

Select the "Diagnostics" menu item on the PIWIS Tester.

3.1.4

If 9900 - PIWIS Tester 3 is connected correctly, a connection to the vehicle will be
established: “Macan model line” is detected.

3.1.5

Create a vehicle analysis log (VAL) in the "Overview" menu item.

Information
The function is ONLY available when the Tester is online!
3.2

Enter the new vehicle equipment in the vehicle data using "PIWIS Online"
3.2.1

Select the function "Maintenance of vehicle data with PIWIS ONLINE" in the "Model
line-specific tests and campaigns" menu item.
A message appears informing you that the “Actual” (vehicle) data and “Required”
(PIWIS Online) data will be compared.

Jun 15, 2022
Page 4 of 6

Tequipment

Installation and Conversion Instructions

Macan (95B)
8/22

ENU

2635

2

Press •F12“ to continue.
3.2.2

Confirm the message “The vehicle data was compared with PIWIS Online.
Significant differences were found” with •F12“.

3.2.3

Look for the option "EXHAUST TAILPIPE" in the "Family" column.
Select “0P3 – SPORTS TAILPIPE COVERS IN SILVER” or “0P6 – SPORTS TAILPIPE
COVERS IN BLACK” from the drop-down menu in the “Value” column. Press •F12“
to continue

3.2.4

A table containing the coding value and the columns “new value” and “old value” is
displayed in the overview. Press •F8“ to continue.

3.2.5

Data is then written/stored. The following messages appear one after the other:
•
•
•
•

3.2.6

4

Transferring vehicle data to PIWIS Online.
Writing and transferring vehicle data to the vehicle.
Vehicle order was written successfully.
A check was performed in order to check whether control units have to be
coded or programmed as a result of the changes that were made.

Press •F10“ to open the log. Check that the selected vehicle equipment has been
entered and close the log.

Code/program the new vehicle equipment.
4.1

Code/program the new vehicle equipment.
4.1.1

Confirm the table containing a list of control units that must be
coded/programmed, by pressing •F12“.

4.1.2

Individual data records will be loaded, depending on the number of control units to
be coded/programmed.
Wait until messages “Creating backup documentation. Please wait … and await the
message “Coding was completed successfully.”. Press •F12“ to continue.
Repeat the process for other control units if necessary.

4.1.3

Wait for the “Adaptation of the control units is complete.” message and check the
coding status of the control units in the table displayed.
Continue by pressing •F12“ to return to the control unit overview.

4.2

5

Read out the fault memory of all systems, work through any existing faults, and erase the
fault memory.  Workshop Manual '0X03IN Diagnostic maintenance: Diagnostic system
and maintenance inter...'

Concluding work
5.1

Switch off ignition and disconnect 9900 - PIWIS Tester 3.

5.2

Disconnect the battery charger.  Workshop Manual '2X00IN Battery trickle charge'

5.3

Drive the vehicle off the lifting platform.

Tequipment

Jun 15, 2022
Page 5 of 6

2

Macan (95B)
2635

26 35 32 01:

ENU

8/22

Installation and Conversion Instructions

–Tailpipes (2 pieces) converted–
Includes:
Standard tailpipe (2 pieces) removed and new sports tailpipe
(2 pcs) installed;
Aligning new sports tailpipe with the rear apron;
Encode sports tailpipes (I-No. 0P3 or I-No. 0P6) in the vehicle
data using the PIWIS Tester.

Labor time: 68 TU

Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.

© 2022 Porsche Cars North America, Inc.

Jun 15, 2022
Page 6 of 6

Tequipment