Installation and Conversion Instructions

Panamera (971)
3/22

ENU

2635

2

Sports Tailpipe – Silver (0P3) / Black (0P6)

Vehicle Type:

Panamera / Panamera 4 / Panamera 4 E-Hybrid
including related Executive and Sport Turismo variants

Model Year:

As of 2021

Information:

Retrofitting

Figure 1
Notes:

The tailpipes for the standard exhaust system on the vehicles specified above can be replaced by new
sports tailpipes in Silver chrome-plated look (0P3) or Black chrome-plated look (0P6) ( Figure 1).
The sports tailpipes can be retrofitted worldwide.
The sports tailpipes are also available straight from the factory for new vehicles by requesting the
relevant optional equipment.

Part Nos.:

971.044.206.A

 Sports exhaust system – Silver chrome-plated, set

971.044.206.B

 Sports tailpipe, – black chrome-plated, set

Tequipment

Jun 2, 2022
Page 1 of 9

2

Panamera (971)
2635

ENU

Installation and Conversion Instructions

3/22

Parts list:

Figure 2
958.111.220.10

2x

Clamping sleeve, ∅ 65 x 88  Figure 2 -1-

971.253.607.AY

1x

Rear silencer, left  Figure 2 -2-

971.253.608.AY

1x

Rear silencer, right  Figure 2 -3-

N.903.425.02

4x

Speed nut, M6 x 19.5 x 18 – VW602 49  Figure 2 -4-

9A7.253.824.40

4x

Countersunk screw, M6 x 12 PA  Figure 2 -5-

9A7.253.823.301

1x

Sports tailpipe, silver chrome-plated, outer left  Figure 2 -6-

9A7.253.823.351

1x

Sports tailpipe, silver chrome-plated, inner left  Figure 2 -7-

9A7.253.824.351

1x

Sports tailpipe, silver chrome-plated, inner right  Figure 2 -8-

9A7.253.824.301

1x

Sports tailpipe, silver chrome-plated, outer right  Figure 2 -9-

9A7.253.823.401

1x

Sports tailpipe, black chrome-plated, outer left (not shown)

9A7.253.823.451

1x

Sports tailpipe, black chrome-plated, inner left (not shown)

9A7.253.824.451

1x

Sports tailpipe, black chrome-plated, inner right (not shown)

9A7.253.824.401

1x

Sports tailpipe, black chrome-plated, outer right (not shown)

1

Jun 2, 2022
Page 2 of 9

ONLY contained in respective set!

Tequipment

Installation and Conversion Instructions

Panamera (971)
3/22

ENU

2635

2

Information
ONLY in the event of repairs/replacement:
Items WITHOUT a part number in the parts list can be found/ordered from the Porsche Electronic Parts
Catalog = PET.
Check model year and vehicle equipment (I-no.) in the standard catalog!
Tools:

VAS 1783 - Torque wrench

Flashlight

VAS 6254 - Chain-type pipe cutters

VAS 6254 - Ratchet-type pipe cutters

VAS 6780 - Body saw

VAS 6931 - Engine and gearbox jack

1

Assembly:

Preparatory work
1.1

Drive the vehicle onto a lifting platform and connect a battery charger.  Workshop Manual
'2X00IN Battery trickle charge'

1.2

Raise the vehicle.  Workshop Manual '4X00IN Raising the vehicle'

CAUTION
Hot components
•

Risk of burns



Let hot components cool down.



Wear personal protective gear.
1.3

Remove standard tailpipes ( Figure 5
(Panamera Turbo)).  Workshop Manual
'263519 Removing and installing tailpipe
trim'
1
2
3

1.4

– Standard tailpipes – right-hand side
– Lens-head screw, M6 x 12
– Speed nut, M6 x 19.5 x 18 – VW602
49

Remove rear silencer.  Workshop Manual
'263319 Removing and installing rear
muffler'
1.4.1

Remove rear underbody cover.
 Workshop Manual '519419
Removing and installing cover for
rear underbody'
Figure 5 (Panamera Turbo)

Tequipment

Jun 2, 2022
Page 3 of 9

2

Panamera (971)
2635

ENU

Installation and Conversion Instructions

3/22
1.4.2

Remove hexagon-head bolt M8
x 16 (2 x) on strut between the
rear silencers ( Figure 6 -1-) and
remove strut.
1
2
3
4

–
–
–
–

Installation position of strut
Disconnection point
Body saw
Multiple-tooth countersunk
screw, M8 x 20 (rear-end
cross strut)

1.4.3

Cut rear silencer at the connection
point (marking on underside) using
pipe cutters or body saw.

1.4.4

Release and disconnect plug connection for exhaust flap actuator (rear silencer at
the left/right).

1.4.5

Remove hexagon-head bolts M8 x 20 (2 x) on rear-end cross strut ( Figure 6 -4-).
 Workshop Manual '421319 Removing and installing rear-axle chassis subframe

Figure 6

struts'
Information
•

Before the rear muffler is released, the exhaust system must be supported
with a transmission jack or held by another person.

1.4.6

Remove hexagon-head bolt M8 x 16 on rear silencer holder at the rear (left/right).

1.4.7

Remove rear silencers (at the left/right).

1.4.8

De-burr cut on inside and outside
of front silencer ( Figure 7
-Arrows-).
If necessary, remove rust from front
silencer exhaust pipe using suitable
polishing agents and restore its
round shape.

2

Install new rear silencers (left/right).  Workshop
Manual '263319 Removing and installing rear
muffler'
2.1

Jun 2, 2022
Page 4 of 9

Install clamping sleeve, ∅ 65 x 88 (2 x) on
exhaust pipe for front silencer (left/right).

Tequipment

Figure 7

Installation and Conversion Instructions
2.2

3/22

ENU

2635

2

Install new speed nut M6 x 19.5 x 18 –
VW602 49 (2 x) on holders on exhaust pipes
of new rear silencers (left/right  Figure 8).
1
2

2.3