NHTSA ID Number: 10214962
Manufacturer Communication Number: Quick Reference
TSB/Document Date: 2022-07-05
Summary
Audi
Quick Reference Specification Guide.
P2138
Pedal Position Sensor D/E
Circuit Voltage Correlation
Signal voltage sensor 1 vs.
sensor 2 > 143 - 260 mV
P214E
Reducing Agent Metering
Current Over-Temperature
System Control Module -J880- diagnostic signal from output
Internal Temperature Too High driver
• Power stage temperature
> 140 °C
P214F
Reducing Agent Metering
System Control Module -J880Internal Pump Temperature
Too High
P2146
Fuel Injector Group "A" Supply Diagnostic signal from power
Voltage Circuit Open
stage = internal signal
P2149/
P2152
Fuel Injector Group "C" Supply Diagnostic signal from power
Voltage Circuit/Open
stage = internal signal
P2181
Engine Coolant Temperature
Sensor on Radiator Outlet
Circuit Rationality Check
Deviation between target and
measured ECT < - 7.5 [K]
P2183
Engine Coolant Temperature
Sensor on Radiator Outlet
Circuit Cross Check
ECT on radiator outlet vs IAT or
AAT or FTS at start up > 35 K
P2184
Engine Coolant Temperature
Sensor on Radiator Outlet
Circuit Grounded
Signal voltage < 162 mV
336
Current Over-Temperature
diagnostic signal from output
driver
• Power stage temperature
> 140 °C
Audi A6/S6 Quick Reference Specification Book
•
September 2013
Error Message
Malfunction Criteria and
Threshold Value
P2185
Engine Coolant Temperature
Sensor On Radiator Outlet
Circuit Short to Battery
Voltage
Signal voltage > 3255 mV
P2195
O2 Sensor Signal Stuck Lean
(Bank 1 Sensor 1)
• Measured oxygen
concentration @ fuel cutoff
> 25.6%
or
• Measured oxygen
concentration @ part load
> (calculated) 11%
P2196
2 Sensor Signal Stuck Rich
Bank 1 Sensor 1
Measured oxygen concentration
@ fuel cutoff > 14.7%
P220A
NOx Sensor Front Circuit
Supply Voltage
Sensor supply voltage > 1.5 or
< 12 V
P220B
Ox Sensor Rear Supply
Voltage Circuit
Sensor supply voltage > 1.5
P2200
NOx Sensor Front Circuit
Failure
NOx sensor signal ratio of
validity ≥ 0.50 [-]
P2201
NOx Sensor Front Circuit
Range / Performance
• NOx 40 - 70%, time > 5 Sec.
or 40% value not reached
within 7 Sec.
• Ratio > 3 or < -0.75
• Average NOx Offset value > 50
or < -30 ppm
P2202
NOx Sensor Front Circuit Low
NOx Sensor Front Circuit Low
P2203
NOx Sensor Front Circuit High NOx value > 1655 ppm
P2209
NOx Sensor Front Rationality
Check
P2237
O2 Sensor Positive Current
Measured oxygen concentration
Control Circuit (Bank 1 Sensor < 0.005
1) Open
P2243
O2 Sensor Reference Voltage
Circuit Bank 1 Sensor 1 Open
• O2S internal resistance > 3 V
• Oxygen signal < -1.3 V or >
1.5 V
P2251
O2 Sensor Negative Current
Control Circuit Bank 1 Sensor
1 Open
O2S internal resistance voltage
>3V
P226C
Turbocharger Boost Control
"A" Slow Response
Boost difference between target
and measured < -6976[J]
P2279
Turbocharger Boost Pressure
Intake Air System Leak
Ratio of measured and modeled
mass air flow = 0.45 - 0.80[-]
NOx control active time since
dew point exceeded > 180
Audi A6/S6 Quick Reference Specification Book
•
September 2013
337
DTC Chart
DTC
DTC
Error Message
Malfunction Criteria and
Threshold Value
P229E
Ox Sensor Rear Circuit Short
or Open
• Message From NOx Sensor =
Failure
or
• NOx sensor status ratio of
validity ≥ 0.5[-]
P229F
NOx Sensor Rear Circuit
Range /Performance
• Average NOx Offset Value
> 50 ppm
• Number of checks = 2[-]
or
• Average NOx Offset Value
< - 30 ppm
• Number of checks = 2[-]
or
• Measured oxygen
concentration compared
with calculated oxygen
concentration deviation @ part
load > 5.3%
P2294
Fuel Pressure Metering Valve
Control Circuit Open
Signal Voltage < 4.7 V
P2295
Fuel Pressure Metering Valve
Control Circuit Grounded
Signal Voltage < 2.97 V
P2296
Fuel Pressure Metering Valve Signal Current > 3.0 A
Control Circuit Short to Battery
Voltage
P22A0
NOx Sensor Rear Circuit Low
NOx value < -105 ppm
P22A1
NOx Sensor Rear Circuit High
NOx value > 1655 ppm
P22A7
Ox Sensor Rear Rationality
Check
NOx control active time since
dew point exceeded >180 s
Ignition System
DTC
P0300
338
Error Message
Random Misfire Detected
Malfunction Criteria and
Threshold Value
• Rise in engine speed after fuel
injection calculated based on
values from last two engine
revolutions
• Error threshold 82%
misfire over 440 crankshaft
revolutions
Audi A6/S6 Quick Reference Specification Book
•
September 2013
Error Message
Malfunction Criteria and
Threshold Value
P0301
Cylinder 1 Misfire Detected
• Rise in engine speed after fuel
injection calculated based on
values from last two engine
revolutions
• Error threshold 82%
misfire over 440 crankshaft
revolutions
P0302
Cylinder 2 Misfire Detected
• Rise in engine speed after fuel
injection calculated based on
values from last two engine
revolutions
• Error threshold 82%
misfire over 440 crankshaft
revolutions
P0303
Cylinder 3 Misfire Detected
• Rise in engine speed after fuel
injection calculated based on
values from last two engine
revolutions
• Error threshold 82%
misfire over 440 crankshaft
revolutions
P0304
Cylinder 4 Misfire Detected
• Rise in engine speed after fuel
injection calculated based on
values from last two engine
revolutions
• Error threshold 82%
misfire over 440 crankshaft
revolutions
P0305
Cylinder 5 Misfire Detected
• Rise in engine speed after fuel
injection calculated based on
values from last two engine
revolutions
• Error threshold 82%
misfire over 440 crankshaft
revolutions
P0306
Cylinder 6 Misfire Detected
• Rise in engine speed after fuel
injection calculated based on
values from last two engine
revolutions
• Error threshold 82%
misfire over 440 crankshaft
revolutions
Audi A6/S6 Quick Reference Specification Book
•
September 2013
339
DTC Chart
DTC
DTC
Error Message
Malfunction Criteria and
Threshold Value
P0321
Engine Speed Input Circuit
Range/Performance
• Counted teeth vs. reference
> 200
• Monitoring reference gap
failure
P0322
Engine Speed Input Circuit No
Signal
• Camshaft signal > 10
• Engine speed = no signal
Additional Exhaust Regulation
DTC
Error Message
Malfunction Criteria and
Threshold Value
P04DD
Cold Start EGR Insufficient
Flow Detected
Control deviation < f(engine
speed, injection quantity, target
air mass flow)
P04DE
Cold Start EGR Excessive
Flow Detected
Ratio of modeled and measured
air mass flow > f(turbo charger
position)
P040B
Exhaust Gas Recirculation
Temperature Sensor Circuit
Range/Performance
Measured sensor temperature
- mean value of modelled
temperature
P040C
Exhaust Gas Recirculation
Temperature Sensor Circuit
Low
Signal voltage < 0.68 V
P040D
Exhaust Gas Recirculation
Temperature Sensor Circuit
High
Signal voltage > 2.61 V
P0401
Exhaust Gas Recirculation
Insufficient Flow Detected
Control deviation < f (engine
speed, injection quantity, target
air mass flow)
P0402
Exhaust Gas Recirculation
Excessive Flow Detected
Ratio of modeled and measured
air mass flow > 1.3[-]
340
Audi A6/S6 Quick Reference Specification Book
•
September 2013
Error Message
Malfunction Criteria and
Threshold Value
P0403
Exhaust Gas Recirculation
Actuator Circuit Functional
Check
• Control deviation > 10.00 [%]
or
• Control deviation < -10.00 [%]
or
• Actual position ≤17.00 [%]
• Control deviation > 10.00 [%]
or
• Control deviation < -10.00 [%]
• Actual position > 17.00 [%]
Open circuit:
• Control deviation < -10.00 [%]
Short to ground:
• Signal current > 8 - 18 [A]
Short to battery voltage
• Signal current > 8 - 18 [A]
P0404
Exhaust Gas Recirculation
Control Circuit Range/
Performance
• Control deviation > 10%
• Actual position > 17%
P0405
Exhaust Gas Recirculation
Sensor Circuit Low
Position sensor signal < 0.25 V
P0406
Exhaust Gas Recirculation
Sensor Circuit High
Position sensor signal ≥ 4.75 V
P0420
Catalyst System Bank 1
Efficiency Below Threshold
Ratio of measured and modeled
heat < 0.3
P046C
Exhaust Gas Recirculation
Sensor Circuit Range/
Performance
Position sensor signal > 1.05 V
P1419
Exhaust Gas Recirculation
Cooler Switch-over Valve 2
Short circuit to Voltage
Diagnostic signal from power
stage > 1.5 A
P146D
- 【Looking for More Professional Vehicle Scan...
- 【OE-Level 4 Systems OBD2 Scanner】iCarsoft E...
- 【4 Systems Diagnosis for 10000+ Vehicles】 iCarsoft E...
- 【6 Reset Services】iCarsoft E660 2026 Upgrade Version is...
- 【118+ Real Time Record & Live Graph View】iCarsoft E...
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Quick Reference
Replacement Service Bulletin Number:
MFR Communication Date: 2013-09-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ VCI150 Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. 1. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If the device fails to charge or turn on, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
- 👨🎓Tips Before Order: 🚩All function are vehicle-specific - send VIN(17 digits)/Make/Model/Year & needed function via 📞auteldirect @ outlook . com📞 to check before order. 🚩Register tool: a) Follow on-screen guide; or b) Register em-ail on Autel we-b, then bind using SN(back of device) + verification code (find in tool settings or con-tact us via above em-ail). MK808BT PRO comes with ✅English, if need Spanish, please s.end device SN to add. ✅1-year war-ranty. ✅$150 worth 1yr fr-ee updates(New users: ignore renewal alerts). ⚠️📢Post-expiry: Most functions remain functional,for exclusions, refer to A+ Tips. ⚠️Fee for FCA AutoAuth Ga.teway(optional): $50/year, charged by AutoAuth,not Autel.
- 【2026 MK808BT PRO: Same as MK900BT, up of MK900 MX900 MK808S MX808S】Why pay more? 2026 MK808BT PRO functions as MK900BT and saves you 100USD. At same c0st, you now get diagnostic 8X faster and sup-port for 150+ models(1996-2026).💡Dramatically Improved: ✔️Faster & Smarter OS: Android 4.4➡ Android 11 ✔️More Services: 28+➡ 40+ ✔️Bidirectional Control: 50+➡ 3,000+ ✔️Enhanced Hardware: 1/32G➡ 4G/64G ✔️2.4GHz➡ 5G Dual WiFi ✔️Working range: 0.9m➡ 10m+ 🔋Battery test is clear on the large 7in display(BT506 required). 🔔Your Autel scanner is shipped brand new. For any issues(used, damaged, incompatible), e-m-a-il 📞auteldirect @ outlook . com📞 for priority resolution.
- 👍【New Next-Level Bidirectional Control, 50➡3000+ Tests, Covers Daily Repairs】Unlike the Autel DS708 DS808 MP808 MK808 and MX808 car diagnostic scanners, which offer only 50 functional tests, the Autel bidirectional scan tool MK808BT PRO is equipped with over 3000 active tests. These tests are widely used on car subsystems to help technicians quickly check if the car's actuators are functioning properly. Such as ABS, windows, rearview mirrors, wipers, sunroofs, fuel injectors, AC clutches, coolant fans, radiator fans, coolant pumps,etc. Tips📢: All functions are vehicle-specific, not universal to all vehicles,pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【28+ Hot Services for 150+ Makes】Autel scan tool MK808BT PRO, upgraded with a BT VCI Mini(valued at 120USD), surpasses the old wired OBDII scanner MK808S MK900, by providing a convenient 33ft wireless working range, offering greater freedom and comfort compared to the 3.3ft cable limit of the MK900 MK808S MX808S car scanner. New features include VIN Check across different modules for comparison and 28+ resets, such as injector coding, ABS autobleed, Oil reset, SAS cali.bration, BMS, throttle relearn, suspension adjustments, etc. ⚠️📢Tips: Service functions are vehicle-specific, not universal to all vehicles, pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【All Available Module Diagnosis - OE-Level Scanner】The OE versatile OBDII scan tool MK808BT PRO escaner para autos effectively works with all car systems: ABS, ECM, BCM, SRS, TCM,etc. It identifies vehicles via AutoVIN/manual input/select, like S.nap-on tools, it can ✔read/clear 7000+ DTCs, ✔read ECU info, ✔view 5-in-1 live data, ✔perform active tests, and ✔reset services. ✔Reports can be shared via QR-code and printed, working globally and 21+ multilingual. Supports 150+ US/EU/Asian makes, with ongoing updates from 2024 to 2026. ⚠️Note📢: The AutoVIN function usually works for post-2006 cars, depending on if the vehicle's VIN is stored in the ECU. You can always do manual input/select.
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.