Update Prior to Sale Notice UPS2613: Charge Air

SERVICE

Cooler Clip / Hose Inspection
03-MAY-13

No.:

6-201NAS

Section:

BULLETIN

GENERAL

Market:

INFORMATION

CAN / USA

DESCRIPTION
To confirm the as-built condition of 2013 model year XF vehicles fitted with the 2.0L GTDi engine only, inspection
of the Charge Air Cooler clips and hoses is necessary. Accurate Warranty claim data is required for investigation
purposes. The correct Option Code which corresponds to the vehicle condition must be claimed.
AFFECTED VEHICLES
The VIN range of affected vehicles is S51675-S91731.
WORKSHOP PROCEDURES
Retailers are required to check DDW to ensure that the vehicle is affected by this program prior to undertaking
any rework action. Refer to Technical Bulletin UPS2613-1bNAS, Update Prior to Sale: Charge Air Cooler Clip /
Hose Inspection, for detailed repair instructions.
PARTS
No parts required
TOOLS
Refer to Workshop Manual / Repair Procedure for any required special tools
WARRANTY
NOTE: Always check DDW to verify that the vehicle is affected by this Action prior to undertaking any repairs.
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must
be taken as guidance only. Always refer to Repair Times Searcher (RTS) on TOPIx to obtain the latest repair
time.
Warranty claims must be submitted quoting Program Code 'K178' together with the relevant Option Code from the
table. SRO and parts information is included for information only. The Option Code(s) that allows for the
drive in / drive out allowance can only be claimed if the vehicle is brought back into the workshop for this action
alone to be undertaken. This program is valid for a limited time only. Warranty claims with a repair date prior to
the 03 November 2013 closure date must be submitted for payment within 30 calendar days of completion of the
repair.
NOTE: Accurate Warranty claim data is required for investigation purposes. The correct Option Code which
corresponds to the vehicle condition must be claimed.
PROGRAM
CODE

OPTION
CODE

K178

B

Clip is in correct position – tighten clip
Drive in/drive out

10.10.99
10.10.10

0.20
0.10

-

-

0.20

-

-

C

Incorrect position of clip – reposition clip
and tighten
Drive in/drive out

05.10.20

K178

10.10.10

0.10

-

-

18.91.51

0.20

-

-

10.10.10

0.10

-

-

K178

D

DESCRIPTION

Incorrect position of the hose – reposition
hose and clip and tighten
Drive in/drive out

SRO

PART NO.

TIME
(HOURS)

Normal Warranty policies and procedures apply

Jaguar Land Rover North America, LLC

555 MacArthur Boulevard

Mahwah, NJ 07430

QTY. /
VALUE