NHTSA ID Number: 10214406
Manufacturer Communication Number: K262-UPS7514-4bN
TSB/Document Date: 2022-06-21
Summary
Engine Front Ancillary Fixings.
Page 1 of 27
TECHNICAL BULLETIN
K262 UPS7514-4bNAS1
10 OCT 2014
© Jaguar
Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools, and equipment required to do the
job properly and safely. It informs these Technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle
service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition described affects your vehicle.
Contact an authorized Jaguar service facility to determine whether this bulletin applies to a specific vehicle.
SECTION: 100-00
Update Prior to Sale: Engine Front Ancillary Fixings
AFFECTED VEHICLE RANGE:
F-TYPE (X152)
Model Year:
VIN:
2015
K17144-K18826
XF (X250)
Model Year:
VIN:
2015
U48674-U54804
XJ Range (X351)
Model Year:
VIN:
2015
V76484-V78814
MARKETS:
NAS
CONDITION SUMMARY:
Situation: A potential issue has been identified on a limited number of 2015 model year F-TYPE (X152), XF (X250), and XJ (X351) vehicles
where the torque of some of the fixings that secure the ancillaries to the engine may not be to the correct specification.
Action: Retailers are required to HOLD only affected vehicles that are within your control and refrain from releasing the vehicles for new or
used vehicle sale pending completion of the rework action detailed in this Technical Bulletin. Unsold vehicles should have this performed as
part of the Pre-Delivery Inspection (PDI) process but must have it completed prior to vehicle handover to the customer. Affected vehicles
already in the hands of customers should be updated at the next available opportunity.
PARTS:
No parts required
SPECIAL TOOLS:
Refer to Workshop Manual / Service Instruction for any required tools
WARRANTY:
NOTE: Check DDW to ensure that a vehicle is affected by this program prior to undertaking any rework action. Repair
procedures are under constant review, and therefore times / prices are subject to change; those quoted here must be taken as
guidance only. Refer to TOPIx to obtain the latest repair time. At the time of confirming a booking for vehicle repair, ensure that all
outstanding Service Actions are identified to ensure the correct parts are available and adequate workshop time is allocated for
repairs to be completed at one visit.
Warranty claims must be submitted quoting Program Code 'K262' together with the relevant Option Code from the table. The SRO and part
information listed have been included for information only. The Option Code(s) that allows for the drive in / drive out allowance may only be
claimed if the vehicle is brought into the workshop for this action alone to be undertaken.
This program is valid for a limited time only. Warranty claims with a repair date prior to the 06 April 2015 closure date must be submitted for
payment within 30 calendar days of completion of the repair.
PROGRAM CODE
OPTION CODE
DESCRIPTION
Engine auxiliary component torque - Check
K262
B
SRO
12.41.89
TIME (HOURS)
F-TYPE - 1.70
XF - 2.0L GTDi, 5.0L S/C V8 - 1.10
XF - 3.0L S/C V6 - RWD - 1.20
XJ - 3.0L S/C V6 - RWD - 1.20
http://topix.jaguar.jlrint.com/topix/service/procedure/500475/ODYSSEY_FSA/G181760...
10/21/2014
Page 2 of 27
XJ - 5.0L S/C V8 - 1.20
K262
C
K262
F
K262
G
Engine auxiliary component torque - Check
Drive in/drive out
12.41.89
10.10.10
F-TYPE - 1.70
XF - 2.0L GTDi, 5.0L S/C V8 - 1.10
XF - 3.0L S/C V6 - RWD - 1.20
XJ - 3.0L S/C V6 - RWD - 1.20
XJ - 5.0L S/C V8 - 1.20
0.10
Engine auxiliary component torque - Check
12.41.89/01
XF - 3.0L S/C V6 - AWD - 1.50
XJ - 3.0L S/C V6 - AWD - 1.40
Engine auxiliary component torque - Check
Drive in/drive out
12.41.89/01
10.10.10
XF - 3.0L S/C V6 - AWD - 1.50
XJ - 3.0L S/C V6 - AWD - 1.40
0.10
Normal Warranty policies and procedures apply
SERVICE INSTRUCTION 'A': 2.0L GTDi Petrol XF Only
NOTE: Illustrations may show components removed for clarity.
1. Disconnect the battery ground cable (see TOPIx Workshop Manual, section 414-01).
2. Remove the engine cover (see TOPIx Workshop Manual, section 501-05).
3. Tighten the Power Assisted Steering (PAS) pump retaining bracket fixings.
1. Torque: 21Nm
4. Tighten the PAS pump fixings.
1. Torque: 21Nm
http://topix.jaguar.jlrint.com/topix/service/procedure/500475/ODYSSEY_FSA/G181760...
10/21/2014
Page 3 of 27
5. Tighten the Front End Accessory Drive (FEAD) tensioner fixing.
1. Torque: 21Nm
6. Tighten the generator fixings.
1. Torque: 40Nm
http://topix.jaguar.jlrint.com/topix/service/procedure/500475/ODYSSEY_FSA/G181760...
10/21/2014
Page 4 of 27
7. Tighten the FEAD idler pulley fixings.
1. Torque: 40Nm
8. Tighten the A/C compressor and A/C compressor bracket top fixings.
1. Torque: 21Nm
9.
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
10. Remove the Air deflector (see TOPIx Workshop Manual, section 501-02).
11. Remove the LH side lower splash shield for access.
http://topix.jaguar.jlrint.com/topix/service/procedure/500475/ODYSSEY_FSA/G181760...
10/21/2014
Page 5 of 27
12. Position aside the transmission oil cooler.
13. Remove the transmission oil cooler bracket.
http://topix.jaguar.jlrint.com/topix/service/procedure/500475/ODYSSEY_FSA/G181760...
10/21/2014
Page 6 of 27
14. Tighten the A/C compressor bracket lower fixing.
1. Torque: 21Nm
15. Tighten the A/C compressor rear fixing and LH engine mount lower fixings.
1. A/C compressor: 21Nm.
2. Engine mount: 40Nm.
16. Remove the RH side lower splash shield for access.
http://topix.jaguar.jlrint.com/topix/service/procedure/500475/ODYSSEY_FSA/G181760...
10/21/2014
Page 7 of 27
17. Loosen but do not fully remove the catalytic converter heat shield fixings.
18. Remove the turbocharger heat shield.
http://topix.jaguar.jlrint.com/topix/service/procedure/500475/ODYSSEY_FSA/G181760...
10/21/2014
Page 8 of 27
19. Remove the RH engine mount heat shield.
20. Tighten the generator bracket upper fixings.
1. Torque: 40Nm
21. Tighten the RH engine mount lower fixings.
1. Torque: 40Nm
http://topix.jaguar.jlrint.com/topix/service/procedure/500475/ODYSSEY_FSA/G181760...
10/21/2014
Page 9 of 27
22. Tighten the generator bracket lower fixing.
1. Torque: 21Nm
23. Tighten the generator bracket front fixing.
1. Torque: 21Nm
http://topix.jaguar.jlrint.com/topix/service/procedure/500475/ODYSSEY_FSA/G181760...
10/21/2014
Page 10 of 27
24. Check the generator battery positive cable is secure and positioned correctly.
1. Tighten the generator battery positive cable fixing.
2. Torque: 9Nm
25. Tighten the transmission fixings.
1. Torque: 40Nm
26. Tighten the transmission Emergency Park Release (EPR) fixing.
1. Torque: 10Nm
http://topix.jaguar.jlrint.com/topix/service/procedure/500475/ODYSSEY_FSA/G181760...
10/21/2014
Page 11 of 27
27. Install the RH engine mount heat shield.
1. Torque: 11Nm
28. Install the turbocharger lower heat shield.
1. Torque: 11Nm
http://topix.jaguar.jlrint.com/topix/service/procedure/500475/ODYSSEY_FSA/G181760...
10/21/2014
Page 12 of 27
29. Tighten the catalytic converter heat shield fixings.
1. Torque: 35Nm
30. Install the transmission oil cooler bracket.
1. Torque: 25Nm
31. Install the transmission oil cooler.
1. Torque: 5Nm
http://topix.jaguar.jlrint.com/topix/service/procedure/500475/ODYSSEY_FSA/G181760...
10/21/2014
Page 13 of 27
32. Install the RH side lower splash shield.
33. Install the LH side lower splash shield.
http://topix.jaguar.jlrint.com/topix/service/procedure/500475/ODYSSEY_FSA/G181760...
10/21/2014
Page 14 of 27
34. Install the Air deflector (see TOPIx Workshop Manual, section 501-02).
35. Lower the vehicle.
36. Check the fuel line connections are secure.
- 6X better wear protection on critical engine parts than...
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full...
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: K262-UPS7514-4bN
Replacement Service Bulletin Number:
MFR Communication Date: 2014-10-10
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.