NHTSA ID Number: 10214067
Manufacturer Communication Number: LTB00525NAS1
TSB/Document Date: 2022-06-13
Summary
Technical Bulletin: Creak Noise From Door/Body Seal (Onwards)
Page 1 of 13
TECHNICAL BULLETIN
LTB00525NAS1
05 MAR 2013
© Jaguar
Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with the knowledge, tools, and
equipment required to do the job properly and safely. It informs these Technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you
are not a Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Land Rover service facility to
determine whether this bulletin applies to a specific vehicle.
SECTION: 501-03
'Creak' Noise From Door / Body Seal
AFFECTED VEHICLE RANGE:
Range Rover Evoque (LV)
Model Year:
2012-2014
VIN:
CH000447 Onwards
MARKETS:
NAS
CONDITION SUMMARY:
Situation:
A 'creak' noise may be heard from the front or rear door / body seal area.
NOTE: All door margin seals (two [Coupe] or four [5-Door]) must be replaced.
Cause: This may be caused by the door margin seal moving against the body and causing a 'creak' noise.
Action: In the event of a customer concern of the above, refer to the Repair Procedure outlined below.
PARTS:
LR048533
Door margin seal - Right-front - 5-door
Quantity: 1
LR048536
Door margin seal - Left-front - 5-door
Quantity: 1
LR048537
Door margin seal - Right-rear - 5-door
Quantity: 1
LR048538
Door margin seal - Left-rear - 5-door
Quantity: 1
LR048534
Door margin seal - Right-front - Coupe
Quantity: 1
LR048535
Door margin seal - Left-front - Coupe
Quantity: 1
WARRANTY:
NOTE: Repair procedures are under constant review, and therefore times are subject to change; those
quoted here must be taken as guidance only. Always refer to TOPIx to obtain the latest repair time.
NOTE: DDW requires the use of causal part numbers. Labor only claims must show the causal part
number with a quantity of zero.
DESCRIPTION
SRO
TIME (HOURS)
CONDITION CODE
CAUSAL PART
Flip seal vehicle set - 5-door
76.31.63
0.60
42
LR033099
Flip seal vehicle set - Coupe
76.31.63
0.40
42
LR033100
NOTE: Normal Warranty policies and procedures apply.
http://topix.landrover.jlrint.com/topix/service/document/242536
3/19/2013
Page 2 of 13
REPAIR PROCEDURE:
5-Door Front Door Seal
1. Note the installed position of the door seal in the two
positions shown.
2. Release the waist seal.
Remove the Torx screw.
http://topix.landrover.jlrint.com/topix/service/document/242536
3/19/2013
Page 3 of 13
3. Release the two (2) fir tree clips.
http://topix.landrover.jlrint.com/topix/service/document/242536
3/19/2013
Page 4 of 13
4.
NOTE: Note the installed position of the seal prior to removal.
Remove the door seal.
http://topix.landrover.jlrint.com/topix/service/document/242536
3/19/2013
Page 5 of 13
5.
NOTE: Make sure that the seal is correctly
located in the positions noted in step 1.
Install the door seal.
Locate the inner edge of the door seal in to the door
frame.
Fully locate the outer edge of the door seal in to the
door frame.
• Repeat the above steps along the entire
length of the door seal until it is fully located in
to the door frame.
6. Install the door seal.
Reverse steps 2-3.
Tighten the Torx screw to 1.2 Nm.
7. Repeat steps 1-6 to the other front door.
5-Door Rear Door Seal
http://topix.landrover.jlrint.com/topix/service/document/242536
3/19/2013
Page 6 of 13
8. Note the installed position of the door seal in the three
positions shown.
9. Remove the waist seal.
Remove the two (2) Torx screws.
10.
CAUTION: Make sure that the rear section of the door seal is released by sliding the door seal
upwards; failure to follow this instruction may result in damage to the door trim.
Remove the door seal.
Release the fir tree clip.
Carefully slide the door seal upwards to release the rear edge of the door seal.
http://topix.landrover.jlrint.com/topix/service/document/242536
3/19/2013
Page 7 of 13
11.
NOTE: Left door seal shown, right door seal
similar.
NOTE: Make sure that the seal is correctly
located in the position noted in step 8.
NOTE: Use a suitable soap solution to aid
installation of the seal to the retaining clips.
Install the seal.
Carefully slide the door seal downwards to secure the
rear edge of the door seal.
Secure the fir tree clip.
12.
NOTE: Front door seal shown; rear door seal
similar.
Secure the door seal.
Locate the inner edge of the door seal in to the door
frame.
Fully locate the outer edge of the door seal in to the
http://topix.landrover.jlrint.com/topix/service/document/242536
3/19/2013
Page 8 of 13
door frame.
Repeat the above steps along the entire length of the
door seal until it is fully located in to the door frame.
13. Secure the door seal.
14.
NOTE: Make sure that the seal is correctly
located in the positions noted in step 8.
Secure the door seal.
http://topix.landrover.jlrint.com/topix/service/document/242536
3/19/2013
Page 9 of 13
15. Install the waist seal.
Tighten the two (2) Torx screws to 1.2 Nm.
16. Repeats steps 8-15 to the other rear door.
Coupe Front Door Seal
17. Note the installed position of the door seal in the three
positions shown.
http://topix.landrover.jlrint.com/topix/service/document/242536
3/19/2013
Page 10 of 13
18. Release the waist seal.
Remove the Torx screw.
19. Release the waist seal.
Remove the Torx screw.
http://topix.landrover.jlrint.com/topix/service/document/242536
3/19/2013
Page 11 of 13
20. Release the fir tree clip.
21.
CAUTION: Make sure that the rear section of
the door seal is released by sliding the door seal
upwards. Failure to follow this instruction may
result in damage to the door trim.
NOTE: Left door seal shown; right door seal
similar.
http://topix.landrover.jlrint.com/topix/service/document/242536
3/19/2013
Page 12 of 13
NOTE: Note the installed position of the seal
prior to removal.
Remove the door seal.
Release the fir tree clip.
Carefully slide the door seal upwards to release the
rear edge of the door seal.
22.
NOTE: Left door seal shown; right door seal
similar.
NOTE: Make sure that the seal is correctly
located in the position noted in step 17.
NOTE: Use a suitable soap solution to aid
installation of the seal to the retaining clips.
Install the seal.
Carefully slide the door seal downwards to secure the
rear edge of the door seal.
Secure the fir tree clip.
23.
NOTE: Make sure that the seal is correctly
located in the positions noted in step 17.
Install the door seal.
Locate the inner edge of the door seal in to the door
frame.
Fully locate the outer edge of the door seal in to the
door frame.
Repeat the above steps along the entire length of the
door seal until it is fully located in to the door frame.
http://topix.landrover.jlrint.com/topix/service/document/242536
3/19/2013
Page 13 of 13
24. Install the door seal.
Reverse steps 18-20.
Tighten the Torx screws to 1.2 Nm.
25. Repeat steps 17-24 to the other front door.
http://topix.landrover.jlrint.com/topix/service/document/242536
3/19/2013
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: LTB00525NAS1
Replacement Service Bulletin Number:
MFR Communication Date: 2013-03-05
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: STRUCTURE:BODY
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission
, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.