NHTSA ID Number: 10213896
Manufacturer Communication Number: T-SB-0015-21 Rev
TSB/Document Date: 2022-06-13
Summary
TSB: This Service Bulletin provides a procedure to properly perform the Techstream ?Control the Injection Mode? active test in some 2016 ? 2022 model year Toyota
vehicles equipped with an FKS engine
T-SB-0015-21
Rev1
March 22, 2021
Injection Mode Active Test Diagnostics
Service
Category
Section
Engine Control
Market USA
Applicability
YEAR(S)
MODEL(S)
2019 - 2022
Avalon, Corolla Hatchback,
RAV4
2018 - 2022
Camry
2020 - 2022
Corolla
2017 - 2022
Highlander
2017 - 2020
Sienna
2016 - 2022
Tacoma
ADDITIONAL INFORMATION
REVISION NOTICE
May 27, 2022 Rev1:
Applicability has been updated to include 2022 model year Avalon, Camry, Corolla,
Corolla Hatchback, Highlander, RAV4, and Tacoma vehicles.
Applicability has been updated to remove 2021 model year Sienna vehicles.
The Test Procedure section has been updated.
Any previous printed versions of this bulletin should be discarded.
© 2022 Toyota Motor Sales, USA
Page 1 of 7
T-SB-0015-21
Rev1
March 22, 2021
Page 2 of 7
Injection Mode Active Test Diagnostics
Introduction
This Service Bulletin provides a procedure to properly perform the Techstream “Control the
Injection Mode” active test in some 2016 – 2022 model year Toyota vehicles equipped with an
FKS engine.
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
N/A
Not Applicable to Warranty
–
–
–
–
Required Tools & Equipment
REQUIRED EQUIPMENT
SUPPLIER
Techstream ADVi*
Techstream 2.0
Techstream Lite
PART NUMBER
QTY
TSADVUNIT
ADE
Techstream Lite (Green Cable)
TS2UNIT
TSLITEPDLR01
TSLP2DLR01
*Essential SST.
NOTE
Only ONE of the Techstream units listed above is required.
Software version 17.00.020 or later is required.
Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE)
at 1-800-368-6787.
© 2022 Toyota Motor Sales, USA
1
T-SB-0015-21
Rev1
March 22, 2021
Page 3 of 7
Injection Mode Active Test Diagnostics
Test Procedure
1. Start the engine and turn OFF the A/C.
2. Connect Techstream to the vehicle and navigate to Engine Active Test – Control the
Injection Mode.
3. Verify the execute conditions are met to perform the active test.
NOTICE
The vehicle MUST be stopped with the engine idling, and the coolant temperature MUST be
above 176°F (80°C).
4. Select OK.
Figure 1.
1
1
z
Active Test Selection
2
z
2
© 2022 Toyota Motor Sales, USA
Execute Conditions
T-SB-0015-21
Rev1
March 22, 2021
Page 4 of 7
Injection Mode Active Test Diagnostics
Test Procedure (continued)
5. Select the criteria desired for monitoring (see Figure 2).
A. Select Primary as the data set to be displayed.
B. Select the parameters.
(1) Engine speed
(2) Injection Mode
(3) Short FT(s)
(4) Long FT(s)
C. Select the graph button.
Figure 2. Example of Selecting Criteria for Monitoring
2
1
z
z
3
z
1
Data Set to Be Displayed
3
Graph Button
2
Parameters
4
Record Button
6. Press the record button to start recording.
© 2022 Toyota Motor Sales, USA
4
z
T-SB-0015-21
Rev1
March 22, 2021
Injection Mode Active Test Diagnostics
Test Procedure (continued)
7. Select Direct on the Control the Injection
Mode window.
Figure 3.
8. Raise the engine to 2,000 RPM.
Figure 4.
9. Press Start.
10. Keep the engine RPM at 2,000 for
30 seconds.
11. Idle the engine for one minute.
12. Click Stop.
Figure 5.
13. Select Port on the Control the Injection
Mode window.
Figure 6.
© 2022 Toyota Motor Sales, USA
Page 5 of 7
T-SB-0015-21
Rev1
March 22, 2021
Injection Mode Active Test Diagnostics
Test Procedure (continued)
14. Raise the engine to 2,000 RPM.
Figure 7.
15. Press Start.
16. Keep the engine RPM at 2,000 for
30 seconds.
17. Idle the engine for one minute.
Figure 8.
18. Click Stop.
19. Click the record button to stop recording.
© 2022 Toyota Motor Sales, USA
Page 6 of 7
T-SB-0015-21
Rev1
March 22, 2021
Page 7 of 7
Injection Mode Active Test Diagnostics
Test Procedure (continued)
Figure 9. Primary Data List Graph Snapshot
1
z
2
z
3
1
Injection Mode Parameter
2
3
Port Injection Mode Confirmation
z
Direct Injection Mode Confirmation
20. Utilizing the primary data list graph snapshot, confirm the switch occurred when commanded
with the injection mode parameter.
Did the vehicle respond to the selected modes (direct and port) during the active test?
YES — The active test is complete.
NO — Retake the active test, return to step 2.
NOTE
If the active test is used multiple times without using this procedure to raise engine RPM, it may be
necessary to reset learning values for fuel trim and air to fuel ratio before returning the vehicle to
the customer.
© 2022 Toyota Motor Sales, USA
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Viscosity breakdown as measured in Kurt Orbahn test on 5W...
- As measured in Seq IX test under high load/torque conditions...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: T-SB-0015-21 Rev
Replacement Service Bulletin Number:
MFR Communication Date: 2022-05-27
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.