NHTSA ID Number: 10213634
Manufacturer Communication Number: KC-2149
TSB/Document Date: 2022-06-07
Summary
Particulate Matter (PM) Sensor Troubleshooting Guide - US14+OBD16 And Newer Emissions
6/1/22, 4:11 PM
Article
Particulate Matter (PM) Sensor Troubleshooting Guide US14+OBD16 And Newer Emissions
Overview
The Particulate Matter (PM) Sensor is a smart sensor that is located after the SCR Catalyst to measure the amo
exhaust. The smart sensor communicates on the DL7 (J1939-7) data link and is used to report the condition of
Filter (DPF).
The primary failure mode the PM Sensor is internal failure, which will generate a fault code.
Diagnosis and Repair
Review Before Beginning
IMPORTANT
The PM Sensor is a smart sensor that reads solid matter (particulates) instead of a gas like most other smart s
care must be given when handling these sensors.
• Handle with extreme care. Sensors contain a ceramic element that is fragile.
• Never use a lubricant on the sensor threads or tip.
• Proper Orientation of the sensor is required.
• Replacement instructions can be found under the Service tab in Impact.
• DO NOT CUT THE HARNESS when initially attempting to remove the sensor. A 22 mm Oxygen Sensor socke
keep the harness intact.
1/4
6/1/22, 4:11 PM
Article
• If damage to the threads occurs when removing the sensor, replace the bung as outlined in Technical Servic
Fittings, One Box, Replacement. PM, NOx and Temperature Sensor Fittings, found under the service tab in Imp
• If multiple PM sensor failures have been experienced, check for water damage as outlined in Technical Servi
069 Exhaust Particulate Sensor, Repair (2017 Vehicles), or 284-068 Exhaust Particulate Sensor, Repair found un
Impact.
1. Navigate to the Service tab.
2. In the Info Type box, make sure Technical Service Bulletins is selected.
3. In the Additional search values box select Keyword
4. Enter 258-039 into the text entry box, press the Search button.
5. A link for the article will be shown in the results. Click on the title, then choose one of the options from the window th
Perform a DTC Readout and Review Codes
REPLACE the sensor if any codes in red below are active and/or confirmed on the Readout.
Fault Code
Fault Description
P103100
Particulate Matter Sensor Clogged Tip
P103200
Particulate Matter Sensor Removed from Exhaust
P24AE13
Particulate Matter Sensor
P24AF00
Particulate Matter Sensor Circuit Range/Performance
P24B000
Particulate Matter Sensor Circuit Low
P24B100
Particulate Matter Sensor Circuit High
P24B313
Particulate Matter Sensor Heater Control Circuit Open
UI
; Live
P24B492
Particulate Matter Sensor Heater Control Circuit Range/Performance
2/4
6/1/22, 4:11 PM
Article
P24B500
Particulate Matter Sensor Heater Control Circuit Low
P24B700
Particulate Matter Sensor Heater Resistance
P24D100
Particulate Matter Sensor Regeneration Incomplete
P24DA00
Particulate Matter Sensor Exhaust Sample Error Bank 1
P24FC00
Particulate Matter Sensor Heater Control Circuit Driver Current/Temperature Too High
P2AB047
Particulate Matter Sensor Processor
DO NOT REPLACE the sensor for any of the codes in green below. The sensor is not the failed component a
performed to find the root cause.
Fault Code
Probable So
Fault Description
P103400
Particulate Matter Sensor System Voltage Too High
Power supply
P24D000
Particulate Matter Sensor Supply Voltage Circuit Low
Power supply
U02A300
Lost Communication With PM Sensor
Wiring harness and connectors
P200200
Diesel Particulate Filter Efficiency Below Threshold (Bank 1)
• Diesel Particulate Filter (DPF) d
• Engine Control Module (EMS)
Rules For Replacement
• Warranty will only cover replacement of the PM Sensor if one of the codes in Red listed above is presen
suspected to have failed with no codes present, an eService case is required for further evaluation.
• Standard Diagnostic Time for a PM Sensor is 0.3 hrs.
Tags
volvo
p103400
p24d000
Review the video link below.
p103100
p103200
Particulate Matter (PM) Sensor
p24b313
p24b492
p24b700
p24d100
TSB 284-069
p200200
p24ae13
p24af00
p24b000
p24b100
p24da00
p24fc00
p2ab047
p24b500
unlocking uptime
Related links and attachments
TSB 284-068
u02a300
Feedback
Give feedback to help improve the cont
TSB 258-039
; Live UI
3/4
6/1/22, 4:11 PM
Article
4/4
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: KC-2149
Replacement Service Bulletin Number:
MFR Communication Date: 2022-05-26
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Newly Added in 2026: 7 Reset Functions] The 2026 new version of the OBD2 scanner diagnostic tool CRP123X V3.0 Elite has new special functions for F.REE: Throttle Ad.aptation, Oil/SAS/BMS/Brake Reset, D-P.F Re.generation and ABS Service. Before you visit a mechanic, launch obd2 Scanner CRP123X Elite can perform a more in-depth diagnosis of the car system and provide accurate data within minutes. What's more, the list of compatible models has been expanded. Upgrading frequency is regular, occurring monthly even weekly.
- 🔥[FCA AutoAuth + CAN FD & DoIP] As an upgraded version of the LAUNCH CRP123X/CRP129X, FOXWELL NT614, and ANCEL FX2000, The Newest LAUNCH CRP123X V3.0 auto diagnostic scanner supports the following new protocols: CAN-FD for 2020 and newer G.M and Chrysler
models, as well as DoIP for V.olvo, Land Rover/Jaguar, and B.MW F/G chassis. With integrated AutoAuth, you can diagnose 2018 and newer FCA cars equipped with S.GW. Note: CAN-FD and DoIP protocols require an additional obd2 cable. *Menus vary by make, model, and year of gasoline or diesel engine vehicle. Email us your VIN data. - 🔥[No extra software fee. Works on 90 vehicle brands.] Most OBD2 scanners work with vehicles manufactured after 2001. However, the LUNCH OBD2 scanner is compatible with OBDII-equipped vehicles built after 1996 and works with more than 90 vehicle brands. One-click lifetime updates over WIFI 2.4&5.0Ghz keep the car software current and ensure constant coverage additions, diagnose vehicles from 1996 to 2026 with a massive global database. Android 8.1 ensures lightning-fast boot-up and processing.
- [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X V3.0 to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership. Generate vehicle health reports with one click and share them via email over Wi-Fi to help avoid blind maintenance. And will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
- [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis（or 4-in-1 merged waveform graph),you can save, share, print, or email the overall inspection report for easier analysis.🔥Code Search,DTC Library provide massive information. Inbuilt “Feedback” module provides customized repair suggestions from our certified professionals.
- [2026 X431 PRO3 V+ Elite] A great value for the X431 series that differs from similar diagnostic tools by adding: 1) J2534 protocol for over $800 in savings; 2) CANFD/DOIP support for enhanced communications; 3) Configuration of over $900 worth of HD(heavy truck) modules, needed purchase HD diagnostic software by HD vehicle model for use.; 4) A 10.1 inch Gorilla screen with 1280*800 resolution and 80% more touch screen sensitivity
- [J2534 Protocol Scan Tool] The J2534 Direct Access Device can be used as a factory scanning tool at no cost to you, saving you over $2,000. You can easily expand your ECU protocol capabilities for Toyota, Honda, VW, BMW, Ford, GM, Chrysler, Mercedes-Benz and more. The LAUNCH X431 PRO3 V+ ELITE Scan Tool is equipped with the newly upgraded smartlinkC V2.0. smartLinkC is a communication interface that supports the J2534 specification. It can also be used as a J2534 PassThru device to implement the J2534 protocol with a PC that has OEM diagnostic software installed.The J2534 protocol is the only way to solve problems ranging from drivability and power loss to poor fuel economy
- [Top Hardware Configuration, Upgraded Version of V+] LAUNCH Diagnostic Scanner adopts Android 10.0 OS; CPU is 4-core processor with 2.0 GHz, which greatly improves the speed of running multi-tasks. 2.4GHz/5GHz; 6300mAh/7.6V ultra-large capacity battery; 10.1 inch Gorilla screen, sunlight readable, 8MP camera; Auto VIN; 4GB+64GB storage; 20x transfer rate to save more vehicle files and customer data; New TYPE A interface to connect expansion tools such as oscilloscopes, sensors, etc.; Supports more than 25 software languages such as EN, DE, FR, SP and JP
- [60+ Reset 3000+ Active Test] Full Bi-Directional Scan Tool quickly detects problems and guides repairs based on the response of actuators such as air conditioning clutches, windows, doors, mirrors and more. With the touch of a finger, you can easily send command signals from the scanner to a variety of modular actuators, testing component integrity and functionality in minutes or even seconds to determine if a replacement or repair is needed. In addition, the machine enjoys 60+ special services such as oil reset, ABS brake bleed, EPB, SAS, BMS, suspension, injector reset and more, and undergoes rigorous field testing to ensure availability
- [Unrivaled Coverage, Over 200 Vehicle Brands] LAUNCH X431 PRO3 V+ Elite Automotive Scanner is suitable for over 200 vehicle brands, including commercial vehicles and new energy vehicles. This professional car scanner supports: 1) J2534/D-PDU protocol for HD trucks; DoIP/CANFD for Land Rover/Jaguar, BMW F/G chassis, GM, etc.; 2) FCA Autoauth, covering 2018+ Chrysler/Dodge/Fiat, etc. New/old models, all covered. Includes frequently updated vehicle software and car coverage for faster support of other new models
- 🔥【2026 TOP HARDWARE AND SOFTWARE UPGRADE，UPGRADED OF CRP919E】LAUNCH scanner CRP919EBT wireless obd2 scanner has upgraded TOP HARDWARE CONFIGURATION and ADD NEWEST FUNCTIONS. The more FASTER and SMARTER CRP919EBT with 🔥Bluetooths & USB 2-in-1 connect🔥Android 10.0 OS🔥2.0Ghz 4 core high efficiency processor 4GB RAM+64GB ROM large storage🔥6300mAh large battery, more stable and longer lasting diagnostics🔥VAG Guided🔥ECU Code🔥Bi-directional Control🔥35+ Resets🔥CANFD&DOIP🔥FCA AutoAuth🔥Full System Diagnostics🔥2 Yrs Update🔥Newly add BST360 battery tester & I-TPMS & VSP600 endoscope🔥23+ Languages. Provide an unparalleled diagnostic experience at an affordable price.
- 🚗【CAN FD & DOIP & FCA, SUPER PROTOCOL】LAUNCH X431 CRP919EBT is equipped with the DBSCAR VII Bluetooth connector supporting CANFD and DoIP. The CRP919EBT automotive diagnostic scanner supports CAN FD protocol (compatible with post-2020 GM vehicles). It also meets DoIP protocol requirements (adapter sold separately) for compatibility with BMW (E & F chassis) models from 2017 onward. Autoauth for FCA SGW supports FCA vehicles including Chrysler models from 2017 and later.
- ✔️【ADVANCED ECU CODE, ADAPTATION, CALIBRATION & INITIALIZATION】The LAUNCH X431 CRP919EBT automotive scanner delivers exceptional ECU code capabilities for customized vehicle setups. It provides dealer-level functionality to streamline maintenance and repairs, enabling ECU matching and learning for enhanced customization.
- 👍【BIDIRECTIONAL CONTROL, 4000+ ACTIVE TESTS】LAUNCH OBD2 scanner CRP919EBT features bi-directional control - the most demanded capability among mechanics. When headlights or windows malfunction, repairs can be costly. With CRP919EBT, execute ECU commands and assess repair status through systems including ABS, windows, valves, wipers, and headlights - streamlining diagnostics while slashing repair expenses.
- 🥇【35+ MOST POPULAR RESET SERVICE FOR 160 MAKES】Same as Snap-on scanners, CRP919EBT scan tool delivers 35+ reset functions for 160+ vehicle models, including: service oil reset, throttle adaptation, steering angle calibration, brake pad replacement code, tire pressure reset, ABS bleeding, battery registration, gear signal learning, and injector code, etc.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.