NHTSA ID Number: 10212012
Manufacturer Communication Number: NTB22-021
TSB/Document Date: 2022-05-20
Summary
DTC P0746, P0776, P0841, P0965, P17F0 AND/OR P17F1 STORED IN THE TCM IF YOU CONFIRM One or more of the following DTCs are stored:  P0746 – PRESSURE CONTROL SOLENOID A  P0776 – PRESSURE CONTROL SOLENOID B  P0841 – TRANSMISSION FLUID PRESSURE SEN/SW A  P0875 – T/M FLUID PRESS SENSOR/SWITCH  P0965 – PRESSURE CONTROL SOLENOID B  P17F0 – CVT JUDDER (T/M INSPECTION)  P17F1 – CVT JUDDER (C/V INSPECTION)  P17F2 – CVT JUDDER (T/C INSPECTION)  P2857 – CLUTCH A PRESSURE  P2858 – CLUTCH B PRESSURE  P2859 – CLUTCH A PRESSURE  P285A – CLUTCH B PRESSURE IMPORTANT:  If DTCs are stored other than those listed above, this bulletin does not apply.  If DTCs P17F0 and/or P17F1 are the only DTCs stored and there is no customer complaint of judder, this bulletin does not apply.  If ONLY P0875 T/M FLUID PRESS SENSOR/SWITCH is stored, refer to the ESM.  NTB20-060, 2018-2019 Kicks; Enhanced Diagnostic Logic For CVT, has reprogramming instructions that may apply. ACTION Refer to the REPAIR OVERVIEW on page 2.
Figure 258
256.
Operate the shift selector per the on-screen instructions.
a. Move the shift selector to P, then move P>R>N>D>P.
b. Confirm the center display meter indicates the correct selector position.
257.
Select Next.
Figure 259
128/153
NTB22-021
258.
Follow the on-screen instructions to perform Erase All DTCs:
a. Turn the ignition OFF.
b. Turn the ignition ON.
c. Wait for Erase All DTCs to complete.
259.
Select Next.
Turn ignition ON > OFF > ON
Figure 260
260. When the entire reprogramming process is complete, the screen in Figure 261 on
page 130 will display.
129/153
NTB22-021
261.
Verify the before and after part numbers are different.
262.
Print a copy of this screen (Figure 261) and attach it to the repair order.
263.
Select Confirm.
xxxxx-xxxxx
xxxxx-xxxxx
xxxxx
xxxxxxxxxxxxxxxxx
xxxxxx
xxxxxxxxxxxxxxxxx
Figure 261
HINT: If you cannot print the above screen:
a. Select Screen Capture.
b. Name the file.
c. Save the file in My Documents.
o A copy of the screen is now saved in the CONSULT PC. It can be retrieved
and printed at a later time.
130/153
NTB22-021
TCM Recovery:
Do not disconnect the VI or shut down C-III plus if reprogramming does not
complete.
If reprogramming does not complete and the “!?” icon displays as shown in
Figure 262:
Check battery voltage
(12.0–15.5 V).
Ignition is ON, engine OFF.
External Bluetooth® devices are OFF.
All electrical loads are OFF.
Select retry and follow the on screen
instructions.
“Retry” may not go through on first
attempt and can be selected more than
once.
xxxxxx
xxxxxxxxxxxxxxxxx
xxxxxx
xxxxxxxxxxxxxxxxx
Figure 262
If reprogramming does not complete and the “X” icon displays as shown in
Figure 263:
Check battery voltage
(12.0 – 15.5 V).
CONSULT A/C adapter is plugged in.
Ignition is ON, engine OFF.
Transmission is in Park.
All C-III plus / VI cables are securely
connected.
All C-III plus updates are installed.
Select Home, and restart the
reprogram procedure from the
beginning.
xxxxxx
xxxxxxxxxxxxxxxxx
xxxxxx
xxxxxxxxxxxxxxxxx
Figure 263
131/153
NTB22-021
CONTROL VALVE REPLACEMENT
264.
Navigate C-III plus to the screen shown in Figure 264.
Diagnosis (All Systems) > TRANSMISSION > Work support
265.
Select CONTROL VALVE REPLACEMENT.
266.
Select Start.
Figure 264
132/153
NTB22-021
267.
Follow the on-screen instructions; maintain the following conditions:
a. Turn the ignition ON, with the engine OFF.
b. Press the brake pedal.
c. Press the accelerator pedal between ¼ and ½.
d. Put the shift selector in R.
268.
Select Start.
Figure 265
269.
Release the accelerator and brake (shift selector remains in R).
270.
Turn the ignition OFF, then wait 10 seconds.
Figure 266
133/153
NTB22-021
271.
Turn the ignition ON, then wait 10 seconds.
Figure 267
272.
Turn the ignition OFF, then wait 10 seconds.
Figure 268
134/153
NTB22-021
273.
Turn the ignition ON.
274.
Move shift selector to P.
Figure 269
275.
When “Completed” is displayed, select End.
Figure 270
135/153
NTB22-021
276.
Does the pop-up notification in Figure 271 display?
YES: TCM Programming is not correct for the installed control valve. Select OK,
then return to step 206 on page 111.
NO: Proceed to step 277 on page 137.
Pop-up
notification
Figure 271
136/153
NTB22-021
ERASE LEARNING VALUE
277.
Navigate C-III plus to the screen shown in Figure 272.
Diagnosis (All Systems) > TRANSMISSION > Work support
278.
Select ERASE LEARNING VALUE.
279.
Select Start.
Figure 272
137/153
NTB22-021
280.
Follow the on-screen instructions while maintaining the following conditions:
a. Parking brake set.
b. Ignition ON, with the engine OFF.
c. Put the shift selector in R.
d. Fully depress the accelerator pedal.
281.
Select Start.
Figure 273
282.
When “COMPLETED” is displayed, select End.
Figure 274
138/153
NTB22-021
CONFORM CVTF DETERIORTN
283.
Navigate C-III plus to the screen shown in Figure 275.
Diagnosis (All Systems) > TRANSMISSION > Work support
284.
Select CONFORM CVTF DETERIORTN.
285.
Select Start.
Figure 275
286.
Select Start.
Figure 276
139/153
NTB22-021
287.
Select Clear.
Figure 277
288.
Select Yes.
Figure 278
140/153
NTB22-021
289.
When CVFT DETERIORATION DATE changes to “0”, select End.
0
Figure 279
290.
Start the engine.
291.
Set the parking brake.
292.
Turn OFF the A/C.
293.
Bring the engine to normal operating temperature range.
294.
Confirm the CVT fluid temperature is over 122°F (50°C).
141/153
NTB22-021
AUXILIARY GEARBOX CLUTCH POINT LEARNING
295.
Navigate C-III plus to the screen shown in Figure 280.
Diagnosis (All Systems) > TRANSMISSION > Work support
296.
Select Auxiliary gearbox clutch point learning.
297.
Select Start.
Figure 280
298.
Follow the on-screen instructions in Figure 281, and then select Start.
Figure 281
142/153
NTB22-021
299.
With the brake pedal still applied, move the CVT selector lever into the D position.
Figure 282 will be displayed after shifting into D position.
NOTE: The Current status will show “EXECUTING”, but Auxiliary gearbox clutch
point learning will not begin until the vehicle is shifted into the Drive (D) position.
Figure 282
300.
Continue to press the brake pedal until the Current status shows “Completed” as
shown in Figure 284 on page 144.
HINT: This may take several minutes to complete.
Figure 283
143/153
NTB22-021
301.
When “Completed” is displayed, select End.
Figure 284
302.
Shift the vehicle into Park, turn the ignition OFF and release the brake pedal.
303.
Perform Auxiliary Gearbox Clutch Point Learning (steps 295 - 302 on
pages 142 - 144) one additional time (a total of two times).
Erase DTCs
304.
Use C-III plus to erase any transmission DTCs that may have stored.
305.
Turn OFF C-III plus.
306.
Disconnect the VI from the vehicle.
307.
Verify the CVT operates normally and no abnormal noises are heard during a test
drive.
Procedure complete.
144/153
NTB22-021
PARTS INFORMATION
Belt and Pulley with Control Valve Repair (Sub-Assembly Repair)
DESCRIPTION
KIT-CONTROL VALVE
KIT-PULLEY
KIT-OIL PUMP
Loctite 5460 Sealant (1) (2)
Nissan
NS-3 CVT Fluid (1) (2)
Additional Engagement Tool O-Rings (5)
Lens Swab packet
Refer to the footnotes on page 147.
PART #
QUANTITY
3170E-50X5A
31214-50X9D
31340-50X9E
999MP-LT5460P
999MP-CV0NS3
11440
J-51963
1
1
1
(3) (4)
As needed
As needed
(6)
****Single use parts that are not included in the above kit****
****Refer to the library in the EPC for the single use parts lists****
DESCRIPTION
PART # PREFIX
QUANTITY
WASHER – SPRING (manual plate)
08915
1
NUT - HEX (manual plate)
08911
1
145/153
NTB22-021
PARTS INFORMATION (continued)
Control Valve only Repair
DESCRIPTION
PART #
QUANTITY
KIT-CONTROL VALVE
3170E-50X5A
1
999MP-CV0NS3 As needed
Additional Engagement Tool O-Rings (5)
Lens Swab packet
Refer to the footnotes on page 147.
11440
As needed
J-51963
(6)
- CUTTING EDGE TECHNOLOGY - Shockproof technology designed to...
- QUIET SMOOTH SHIFTING - V-Twin Transmission oil dampens...
- IMPROVES PERFORMANCE - Transmission fluid that dramatically...
- POPULAR POWESPORTS OIL FOR - UTVs & Side by Sides, ATVs...
- WHY RED LINE - Established in 1979, Red Line Products...
- CUTTING EDGE TECHNOLOGY - Shockproof technology designed to...
- QUIET SMOOTH SHIFTING - V-Twin Transmission oil dampens...
- IMPROVES PERFORMANCE - Transmission fluid that dramatically...
- POPULAR POWESPORTS OIL FOR - UTVs & Side by Sides, ATVs...
- WHY RED LINE - Established in 1979, Red Line Products...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB22-021
Replacement Service Bulletin Number:
MFR Communication Date: 2022-03-21
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:CVT:PULLEY
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.