NHTSA ID Number: 10211917
Manufacturer Communication Number: Circular 15i5
TSB/Document Date: 2022-06-07
Summary
Engine Intake & Exhaust Valve Springs
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please
forward this letter immediately via first-class mail to the lessee within ten (10) days of
receipt. If you have changed your address or sold the vehicle, please fill out the
enclosed prepaid Owner Reply card and mail it to us so we can update our records.
Can we assist you
further?
If your authorized Audi
dealer fails or is unable to complete this work free of charge
within a reasonable time, please contact Audi Customer Experience at 1-800-253-2834
or via our “Contact Us” page at www.audiusa.com.
Checking your vehicle
for open Recalls and
Service Campaigns
To check your vehicle’s eligibility for repair under this or any other recall/service
campaign, please visit the Recall/Service Campaign Lookup tool at
www.audiusa.com and enter your Vehicle Identification Number (VIN).
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your
vehicle continues to meet and exceed your expectations.
Sincerely,
Audi Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi
dealer. 2022 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2022
15i5 Page 4 of 11
Customer Letter Example (Canada)
This notice applies to your vehicle: ,
Subject: Service Action 15i5 - Engine Intake & Exhaust Valve Springs
Dear Audi Owner,
As part of Audi’s ongoing commitment to customer satisfaction, we are informing you of our decision to conduct a
service action on certain 2022 model year Audi vehicles. Our records show that you are the owner of a vehicle
affected by this action.
What is the issue?
In affected vehicles, the engine valve springs may be outside the specified tolerance.
As a result, there is a risk that a valve would break in certain driving situations.
What will we do?
Your authorized Audi dealer will replace the engine intake & exhaust valve springs.
This work will take several days to complete and will be performed for you free of
charge.
What should you do?
In order to limit any possible inconvenience, please contact your authorized Audi dealer
as soon as possible to schedule this service. Please keep in mind that your dealer may
need additional time for the preparation of the repair, as well as to accommodate their
daily workshop schedule.
This service action will be available for you free of charge only until May 03, 2027. If
you wish to have this service performed after that date, your dealer’s normal costs
associated with this repair will apply.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please
forward this letter immediately via first-class mail to the lessee within ten (10) days of
receipt. If you have changed your address or sold the vehicle, please fill out the
enclosed prepaid Owner Reply card and mail it to us so we can update our records.
Can we assist you
further?
If your authorized Audi dealer fails or is unable to complete this work free of charge
within a reasonable time, please contact Audi
Customer Relations Monday through
Friday from 8AM to 8PM EST at 1-800-822-2834 or via our “Contact Audi Canada”
page at www.audi.ca.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your
vehicle continues to meet and exceed your expectations.
Sincerely,
Audi Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2022 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2022
15i5 Page 5 of 11
Repair Overview
Replace all intake and exhaust valve springs.
NOTE
These repair instructions may differ from the labor operations and labor times listed in ELSA.
Damages resulting from improper repair or failure to follow these work instructions are the dealer’s
responsibility and are not eligible for reimbursement under this action.
This procedure must be read in its entirety prior to performing the repair.
Due to variations in vehicle equipment and options, the steps/illustrations in this work procedure may not
identically match all affected vehicles.
Diagnosis and repair of pre-existing conditions in the vehicle are not covered under this action.
When working during extreme temperatures, it is recommended that the vehicle be allowed to acclimate
inside the shop to avoid temperature-related component damage/breakage.
Required Tools
Valve Keeper Tool Kit
-VAS5161A-
Valve Keeper Tool Kit Guide Plate V6/V8 TFSI
-VAS5161A/38-
Note: Refer to the ELSA Repair Manual for additional special tools required to remove the engine and transmission
assembly and for completing additional steps when replacing the valve springs.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine
whether this information applies, contact an authorized Audi dealer. 2022 Audi
of America, Inc. and Audi
Canada. All Rights Reserved.
May 2022
15i5 Page 6 of 11
Repair Instruction
Section A - Check for Previous Repair
Enter the VIN in Elsa and proceed to the
“Campaign/Action” screen.
TIP
On the date of repair, print this screen and keep a
copy with the repair order.
Confirm the Campaign/Action is open . If the status is closed, no further work is
required.
Note the Applicable Criteria ID for use
in determining the correct work to be done and
corresponding parts associated.
CRITICAL REPAIR STEP
STOP!
If multiple software update Campaign/Actions are
open, they must be performed in order of the Start
date . The oldest should be performed
first.
All Safety Recalls must be completed prior to
completing this campaign.
Proceed to Section B.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine
whether this information applies, contact an authorized Audi dealer. 2022 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2022
15i5 Page 7 of 11
Section B – Repair Procedure
Remove the engine and transmission assembly:
Refer to the ELSA Repair Manual: Repair
manual > Engine > 8-Cylinder Direct Injection
4.0L 4V TFSI Engine EA825 > 10 Engine
Assembly > Engine, Removing and Installing
> Engine, Removing
NOTE
The complete engine is removed and remains
secured to the scissor-type assembly platform.
The engine is NOT separated from the
transmission.
Replace all valve springs:
Refer to the ELSA Repair Manual: Repair
manual > Engine > Servicing – 8-Cylinder 4.0L
4V TFSI Engine EA825 > 15 Cylinder Head,
Valvetrain > Valvetrain > Valve Spring,
Removing and Installing
NOTE
The valve stem oil seals are not renewed during this
campaign.
Part Number
Part Description
0P2-109-623
Exhaust valve spring (x16)
06E-109-623-AD
Intake valve spring (x16)
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine
whether this information applies, contact an authorized Audi dealer. 2022 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2022
15i5 Page 8 of 11
Note the following when performing the repair:
Guide plate -VAS5161A/38- has only one
attachment point for cylinders 4 and
8, and so two M8 socket head bolts must be used to prevent turning and
increase process reliability.
NOTE
Cylinder head shown removed. The cylinder head
does not require removal.
O-ring for both high pressure fuel pumps
must be replaced.
Pos.
Part Number
Part Description
1
WHT-005-184
Seal (x2)
Lubricate O-rings lightly with fresh engine oil
prior to installation.
Do not renew tappet.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine
whether this information applies, contact an authorized Audi dealer. 2022 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2022
15i5 Page 9 of 11
Fuel lines must be replaced.
Injector seals must be replaced.
Pos.
Part Number
Part Description
1
0P2-127-507-C
High pressure line,
cylinders 1-4
2
0P2-127-507-B
High pressure line,
cylinders 5-8
3
0P2-127-503-F
Low pressure supply
line
4
06M-998-907
Repair kit
Cylinder head cover gaskets , and
covers must be replaced.
Timing cover covers and covers must
be resealed with sealant (refer to ELSA
Repair Manual).
Pos.
Part Number
Part Description
1
0P2-103-650-E
Cylinder head cover
gasket, cylinders 1-4
2
0P2-103-649-E
Cylinder head cover
gasket, cylinders 5-8
3
0P2-103-113-A
Cover (x3)
4
D -176-501-A1
Sealant
All one time use fasteners and seals removed
during the repair must also be replaced. Refer
to the ELSA Repair Manual.
Proceed to Section C
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine
whether this information applies, contact an authorized Audi dealer. 2022 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2022
15i5 Page 10 of 11
Section C – Campaign Completion Stamp
Once the campaign has been completed,
the technician should stamp the repair
order.
Stamps are available for ordering through
the Compliance Label Ordering Portal.
Proceed to Section D
Item#: AUD4927ENG
-OR-
Item # AUD4927FRE
Section D - Parts Return/Disposal
Properly store (retain), destroy or dispose of removed parts in accordance with all state/province and local
requirements, unless otherwise indicated and/or requested through the Warranty Parts Portal (WPP) for U.S. and
the Part Destruction and Core Disposition Report for Canada.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine
whether this information applies, contact an authorized Audi dealer. 2022 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2022
15i5 Page 11 of 11
- 6X better wear protection on critical engine parts than...
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full...
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Circular 15i5
Replacement Service Bulletin Number:
MFR Communication Date: 2022-05-03
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




