NHTSA ID Number: 10209992
Manufacturer Communication Number: SB1856
TSB/Document Date: 2022-04-06
Summary
Service Information - Maintenance operations related to refrigerant compressor oil This service information bulletin is a reminder/update about refrigerant compressor oil maintenance. To ensure a reliable system, it is important to perform the maintenance on a regular base as mentioned further on.
SERVICE BULLETIN
SB1856
ADDRESSEES
: Owners and operators
ABC Customer Care and Parts Source
VEHICLE MODEL
: All coaches
MANUAL CHAPTER
: 8.14 Climate control – Refrigerant circuit
BULLETIN TYPE
: Service information
DATE
: March 24th, 2022
SUBJECT
: Maintenance operations related to refrigerant
compressor oil
CONDITIONS
: This service bulletin does not entitle to any reimbursement.
INTRODUCTION
Van Hool has been informed about field problems with the refrigerant compressor. This service
information bulletin is a reminder/update about refrigerant compressor oil maintenance. To ensure
a reliable system, it is important to perform the maintenance on a regular base as mentioned further on.
Figure 1: Oil level sight glass on Carrier
O5G
refrigerant compressor.
Figure 2: Oil level sight glass on
Eberspächer/Bitzer refrigerant compressor.
TO CHECK REFRIGERANT COMPRESSOR OIL LEVEL AND CONDITION
Periodicity: at least every 6 months. This interval is valid for systems that have been running
normally and have not experienced any failures. Systems with failures need additional attention
and more frequent checks until it is confirmed there is no concerns. It is also recommended to
change the oil every 3 years.
Step
1
Action
With the belt tensioning system at operating pressure: check whether the
compressor mounting plate is located near the horizontal position. If not, release the
air pressure from the tensioning system and reposition the compressor with respect
to its mounting plate. Put the tensioning system again under pressure and recheck
the position of the mounting plate. Repeat until okay.
Continued on next page.
SB1856_USA_en_2022-03-24
Page 1 of 3
2
3
4
5
6
Start the engine.
Put the climate control in the "GAS CH" state. Follow the instructions mentioned
under "Passenger compartment control system: to troubleshoot using dashboard
display" in chapter 08.02 of the maintenance manual.
Switch off "GAS CH" after 20 minutes.
Shut off the engine.
Check the oil level within 30 seconds.
7
The oil level must be between the center and the top of the sight glass.
Check the condition of the oil as explained under “STEP 7 IN DETAIL”.
STEP 7 IN DETAIL: To check refrigerant compressor oil condition
Refrigerant oil gradually darkens as it picks up moisture and particles. Dirty oil can clog expansion
valves and depriving the compressor of the lubrication it needs.
Check the color of the refrigerant compressor oil. Change the oil if it has a dark color (refer to
figure below). Refer to the maintenance manual for information on how to change the oil.
1
2
3
Figure 3: Refrigerant oil color overview
1. New oil
2. Approximately after 1 year of operation
3. Bad oil. Oil change is necessary!
HELP DESK:
If there are any questions regarding this subject, please call ABC Customer Care & Parts Source
toll-free for guidance on 1-877-427-7278.
DISCLAIMER:
The procedures contained herein are not exclusive. Van Hool cannot possibly know, evaluate, or
advise the transportation industry of all conceivable ways in which a procedure may be undertaken
or of the possible consequences of each such procedure. Other procedures may be as good, or
better, depending upon the particular circumstances involved. Each carrier who uses the
procedures herein must first satisfy himself thoroughly that neither the safety of his employees or
agents, nor the safety or usefulness of any products, will be jeopardized by any procedure
selected.
Continued on next page.
SB1856_USA_en_2022-03-24
Page 2 of 3
INFORMATION HANDLING:
Important additions and modifications regarding technical information not yet included in the
manual will be communicated through Service Bulletins.
VAN HOOL CUSTOMER PORTAL:
Consult the customer portal regularly for the latest service documentation. In addition to the
maintenance manual, you will also find the operating manual and the spare parts catalogue of your
vehicle on the customer portal. The customer portal is accessible through www.vanhool.be, but
only with a code (password) from Van Hool. If you do not have a password yet, request it by using
the link on the Van Hool website.
SB1856_USA_en_2022-03-24
Page 3 of 3
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SB1856
Replacement Service Bulletin Number:
MFR Communication Date: 2022-03-24
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.