Polestar

Service and Parts Business

Safety Data Sheet
32335986
Polestar Automotive USA Inc.
777 MacArthur Blvd
Mahwah, NJ 07430

Emergency
Telephone No.: 1-888-255-3924 (U.S., Canada,
Puerto Rico and the U.S. Virgin Islands)
Revision Date:
Printed:
Supersedes:

2020-04-17
2021-09-10

NOTE: Use the 24-Hour Emergency Telephone Numbers only in the event of a chemical emergency involving a spill, leak, fire, exposure, or accident involving chemicals. All non-emergency questions should be
directed to Polestar Automotive USA Inc. at (800) 806-2504 (U.S.) or (800) 806-2507 (Canada) for assistance.

1.

IDENTIFICATION
Product name: HP-300 GREASE

PART NO: 32335986

Recommended use of the chemical and restrictions on use
Identified uses: Lubricants and lubricant additives
COMPANY IDENTIFICATION:

DDP Specialty Electronic Materials
US 9, LLC
974 Centre Road
Wilmington, DE 19805
UNITED STATES

Customer Information Number:

833-338-7668
[email protected]

EMERGENCY TELEPHONE NUMBER
24-Hour Emergency Contact:
Local Emergency Contact:

2.

1-800-424-9300
800-424-9300

HAZARDS IDENTIFICATION
Hazard classification:

GHS classification in accordance with 29 CFR 1910.1200 Not a hazardous
substance or mixture.

Label elements
Precautionary statements
Response:
Other hazards:

In case of fire: Avoid breathing fume.
No data available.

Produced and printed in the USA and available as an electronic document.
© Polestar 2021

32335986

Safety Data Sheet
PRODUCT NAME:

3.

HP-300 Grease

2021-09-10

COMPOSITION/INFORMATION ON INGREDIENTS
Chemical nature:

4.

REVISION DATE:

Fluorinated hydrocarbons
This product is a mixture.
Contains no hazardous ingredients according to GHS.

FIRST-AID MEASURES
Description of first aid measures
General advice:
First Aid responders should pay attention to self-protection and use the
recommended protective clothing (chemical resistant gloves, splash
protection). If potential for exposure exists refer to Section 8 for specific
personal protective equipment.
Inhalation:
Move person to fresh air; if effects occur, consult a physician.
Skin contact:
Wash off with plenty of water.
Eye contact:
Flush eyes thoroughly with water for several minutes. Remove contact
lenses after the initial 1-2 minutes and continue flushing for several
additional minutes. If effects occur, consult a physician, preferably an
ophthalmologist.
Ingestion:
If swallowed, seek medical attention. Do not induce vomiting unless
directed to do so by medical personnel.
Most important symptoms
and effects, both acute and
delayed:
Aside from the information found under Description of first aid measures
(above) and Indication of immediate medical attention and special treatment
needed (below), any additional important symptoms and effects are described
in Section 11: Toxicology Information.
Indication of any immediate medical attention and special treatment needed
Notes to physician:
No specific antidote. Treatment of exposure should be directed at the control
of symptoms and the clinical condition of the patient.

5.

FIRE-FIGHTING MEASURES
Suitable extinguishing media: Water spray, Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical
Unsuitable extinguishing
media:
None known.
Special hazards arising from the substance or mixture
Hazardous combustion
products:
Fluorine compounds
Carbon oxides
Unusual Fire and Explosion
Hazards:
Exposure to combustion products may be a hazard to health. Toxic vapours
are evolved.
Advice for firefighters
Fire Fighting Procedures:
Use extinguishing measures that are appropriate to local circumstances and
the surrounding environment. Use water spray to cool unopened containers.
Remove undamaged containers from fire area if it is safe to do so. Evacuate
area.

Page 2 of 10

32335986
PRODUCT NAME:

HP-300 Grease

Special protective equipment
for firefighters:

6.

REVISION DATE:

2021-09-10

Wear self-contained breathing apparatus for firefighting if necessary. Use
personal protective equipment. Wear neoprene gloves to prevent contact
with hydrofluoric acid.

ACCIDENTAL RELEASE MEASURES
Personal precautions,
protective equipment and
emergency procedures:
Environmental precautions:

Methods and materials for
containment and cleaning up:

7.

Safety Data Sheet

Follow safe handling advice and personal protective equipment
recommendations.
Discharge into the environment must be avoided. Prevent further leakage
or spillage if safe to do so. Retain and dispose of contaminated wash
water. Local authorities should be advised if significant spillages cannot be
contained.
Wipe up or scrape up and contain for salvage or disposal. Local or national
regulations may apply to releases and disposal of this material, as well as
those materials and items employed in the cleanup of releases. You will
need to determine which regulations are applicable. For large spills, provide
dyking or other appropriate containment to keep material from spreading.
If dyked material can be pumped, Sections 13 and 15 of this SDS provide
information regarding certain local or national requirements.
See sections: 7, 8, 11, 12 and 13.

HANDLING AND STORAGE
Precautions for safe handling:

Conditions for safe storage:

Take care to prevent spills, waste and minimize release to the environment.
Handle in accordance with good industrial hygiene and safety practice.
Use only with adequate ventilation. See Engineering measures under
EXPOSURE CONTROLS/PERSONAL PROTECTION section.
Keep in properly labelled containers. Store in accordance with the particular
national regulations.

Conditions for safe storage,
including any incompatibilities: Do not store in unlabeled containers. Keep container tightly closed. Keep
container in a cool, well-ventilated area.
Do not store with the following product types: Strong oxidizing agents.
Unsuitable materials for containers: None known.

8.

EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters:
Exposure controls
Engineering controls:

If exposure limits exist, they are listed below. If no exposure limits are
displayed, then no values are applicable.
Use local exhaust ventilation, or other engineering controls to maintain
airborne levels below exposure limit requirements or guidelines. If there are
no applicable exposure limit requirements or guidelines, general ventilation
should be sufficient for most operations.

Page 3 of 10

32335986

Safety Data Sheet
PRODUCT NAME:

HP-300 Grease

Hygiene measures:

REVISION DATE:

2021-09-10

Handle in accordance with good industrial hygiene and safety practice. Use
good personal hygiene. Do not consume or store food in the work area.
Wash hands before smoking or eating.

Individual protection measures
Eye/face protection:
Use safety glasses (with side shields).
Skin protection:
Hand protection:
Use gloves chemically resistant to this material. NOTICE: The selection of a
specific glove for a particular application and duration of use in a workplace
should also take into account all relevant workplace factors such as, but not
limited to: Other chemicals which may be handled, physical requirements
(cut/puncture protection, dexterity, thermal protection), potential body
reactions to glove materials, as well as the instructions/specifications
provided by the glove supplier.
Other protection:
Use protective clothing chemically resistant to this material. Selection of
specific items such as face shield, boots, apron, or full body suit will depend
on the task.
Respiratory protection:
Respiratory protection should be worn when there is a potential to exceed the
exposure limit requirements or guidelines. If there are no applicable exposure
limit requirements or guidelines, wear respiratory protection when adverse
effects, such as respiratory irritation or discomfort have been experienced,
or where indicated by your risk assessment process. For most conditions
no respiratory protection should be needed; however, if discomfort is
experienced, use an approved air-purifying respirator.

9.

PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical state:
Color:
Odor:
Odor threshold:
pH:
Melting point/range:
Freezing point:
Boiling point (760 mmHg):
Flash point:
Evaporation rate
(butyl acetate = 1):
Flammability (solid, gas):
Lower explosion limit:
Upper explosion limit:
Vapor pressure:
Relative vapor density
(air = 1):
Relative density (water = 1):

Page 4 of 10

Grease.
White.
None.
No data available.
Not applicable.
No data available.
No data available.
Not applicable.
closed cup >100 °C ( 212 °F)
Not applicable.
Not classified as a flammability hazard.
No data available.
No data available.
Not applicable.
No data available.
2.0

32335986
PRODUCT NAME:

Safety Data Sheet

HP-300 Grease

Water solubility:
Partition coefficient: n-octanol/
water:
Auto-ignition temperature:
Decomposition temperature:
Dynamic viscosity:
Kinematic viscosity:
Explosive properties:
Oxidizing properties:
Molecular weight:
Particle size:

REVISION DATE: