153. Select End.
Print New Calibration Data
154. Select CALIB DATA in TRANSMISSION.
155. Print page 1 of 7 on C-III plus and attach it to the repair order.
156. Return C-III plus to the Home screen.

81/91

NTB21-083A

FWD Clutch Point Learning
157. Apply the vehicle’s parking brake.
158. Start the engine and warm up to operating temperature (50-100o C [122-212o F]).

159. Select Diagnosis (One System).

Figure 165

160. Select Work support under
TRANSMISSION.

Figure 166

82/91

NTB21-083A

HINT: The following FWD CLUTCH POINT
LEARNING will be performed twice; once in
Drive (D) and once in Reverse (R).

161. Select FWD CLUTCH POINT
LEARNING and then Start.
Figure 167

162. With the engine still running and at
idle, depress the brake pedal and shift
the CVT into neutral (N).


Confirm that all of the required
conditions indicated in Figure 168
are being met.
Required
conditions

163. Select Start.

Figure 168

164. While maintaining all conditions shown
in Figure 168 and the “Current status”
indicates “EXECUTING”, shift the CVT
into D and then wait until the “Current
status” indicates “COMPLETED”.
HINT: This may take up to three (3)
minutes to complete.

Figure 169

83/91

NTB21-083A

165. When the screen in Figure 170 is
displayed, shift the CVT into P, and
then select End.

166. Turn the engine OFF and then back
ON.
Figure 170

167. Select FWD CLUTCH POINT
LEARNING and then Start.

Figure 171

168. With the engine still running and at
idle, depress the brake pedal and shift
the CVT into neutral (N).


Confirm that all of the conditions
indicated in Figure 172 are being
met.
Required
conditions

169. Select Start.
Figure 172

84/91

NTB21-083A

170. While maintaining all conditions shown
in Figure 172 and the “Current status”
indicates “EXECUTING”, shift the CVT
into R and then wait until the “Current
status” indicates “COMPLETED”.
HINT: This may take up to three (3)
minutes to complete.

Figure 173

171. When the screen in Figure 174 is
displayed select End, shift the CVT
into P, and then turn the engine OFF.

Perform Select Learning
172. Start the engine, and then wait five (5)
seconds.

Figure 174

173. Move the shift selector to the N position and hold for more than two (2) seconds, and
then move it to the D position and wait for transmission engagement.
174. Repeat step 173 ten (10) times.
175. Move the shift selector to the N position and hold for more than two (2) seconds, and
then move it to the R position and wait for the transmission engagement.
176. Repeat step 175 ten (10) times.
177. Move the shift selector to the P position, and then turn the ignition OFF.
Erase CVT Fluid Degradation Level Data
178. Select Work support in TRANSMISSION.
179. Select CONFORM CVTF DETERIORTN.
180. Select Clear.
181. Clear any DTCs that may have set and then test drive the vehicle.
85/91

NTB21-083A

PARTS INFORMATION
The following part kits are only to be used if the Sub-assembly is being replaced.
DESCRIPTION
BELT-PULLEY KIT
BELT-PULLEY KIT includes:
PULLEY ASSY (Belt and Pulley "Sub-assembly”)
SEAL-O RING (Speed Sensor)
BRG ASSY-THRUST NEEDLE (Thrust Bearing)
FLTR ASSY-OIL,AUTO TRANS (CVT Fluid Filter)
SEAL-O RING
(O-ring Between CVT Case and Side Cover)
SEAL ASSY-OIL
(Torque Converter Oil Seal; Converter Housing)
BOLT (Side Cover and Case)
SEAL-O RING (Filter Cover)
SEAL-O RING (Input Shaft)
SEAL-OIL,DIFF
(Differential Side Oil Seal; CVT Case Side)
SEAL-OIL,DIFF
2WD
(Differential Side Oil Seal; Converter Housing Side)
SEAL-O RING (Pulley Retainer Bolts)
PUMP ASSY-OIL (Oil Pump Kit)
(included with BELT-PULLEY KIT)
Oil Pump Kit includes:
PUMP ASSY-OIL (Oil Pump)
SEAL-O RING (Fitting Bolt)
RING-SNAP (Oil Pump Sprocket)
VALVE ASSY KIT-CONTROL (Valve Body)
Valve Assy Kit-Control includes:
VALVE ASSEMBLY-CONTROL (1)
STRAINER ASSY-OIL, AUTO TRANS
BRACKET (Temperature sensor bracket)
BAND (Zip tie for bracket)
GSKT-OIL PAN
SEAL-LIP (Between CVT and control valve)
SEAL - O RING (CVT fluid overflow plug)
G.

(1)
(2)
(3)

PART #
31214-28X8A

QUANTITY
1

31209-28X8A
31526-1XG0C
See page 98
31726-28X0A

1
1
1
1

31526-28X0A

1

31375-1XF00

1

31377-1XZ0B
or
31377-X425A
31526-3VX0A
31526-80X01

42
1
1

38342 3VX0A

1

38342-3VX0B

1

31526-28X0C

6

31340-28X8A

1

31340-28X0A
31526-28X0C
31506-1XF12

1
1
1

3170E-28X1C

1

31705-28X2A
31728-28X0A
31069-3VX0D
24224-3VX0B
31397-1XF0D
31528-1XZ0A
31526-3VX0B

1
1
1
1
1
1
1

Loctite 5460 Sealant (2)
999MP-LT5460P
(3)
Includes QR label, CD-R, and control valve assembly.
Bill out Loctite 5460 Sealant under expense code 008. Do not include the Loctite
5460 Sealant part number on the claim.
One container of Loctite 5460 Sealant is good for approximately 5 repairs. This
sealant is not included in any kit.

86/91

NTB21-083A

If only a Control Valve is being replaced, use the following parts.
H.

DESCRIPTION
VALVE ASSY KIT-CONTROL
(Valve body)
Valve Assy Kit-Control includes:
VALVE ASSEMBLY-CONTROL (1)
STRAINER ASSY-OIL, AUTO TRANS
BRACKET (Temperature sensor bracket)
BAND (Zip tie for bracket)
GSKT-OIL PAN
SEAL-LIP (Between CVT and control valve)
Seal, O-Ring (CVT fluid overflow plug gasket)
(1)

I.

PART #

QUANTITY

3170E-28X1C

1

31705-28X2A
31728-28X0A
31069-3VX0D
24224-3VX0B
31397-1XF0D
31528-1XZ0A
31526-3VX0B

1
1
1
1
1
1
1

Includes QR label, CD-R, and control valve assembly.

REMINDER! When instructed to reference the ESM for a repair procedure, ensure
one-time-use parts are replaced.

Parts required for both repairs.
DESCRIPTION
Nissan NS-3 CVT Fluid (1) (2)
Lens Swab packet
(1)
(2)

PART #
999MP-CV0NS3
J-51963

QUANTITY
As needed
As needed

For warranty repairs, Nissan NS-3 CVT Fluid must be used. For customer pay repairs,
Nissan NS-3 CVT Fluid or an equivalent is recommended.
This item can be ordered through the Nissan Maintenance Advantage program:
Phone: 877-NIS-NMA1 (877-647-6621) or Website: Order via link on dealer portal
www.NNAnet.com and click on the “Maintenance Advantage” link.

87/91

NTB21-083A

CLAIMS INFORMATION
J.

If Belt Inspection is not Performed and Sub-Assembly is replaced
Submit a Primary Part (PP) type line claim using the following claims coding:
OPERATION

PFP OP CODE SYM DIAG FRT
JD01AA

CVT R&R
(1)
Replace CVT Sub-Assembly
(includes control valve R & I) RPL
(1)
(2)

JD023A

(2)
ZE

32

JX50AA

3.8

Reference the Parts Information Table and use the BELT-PULLEY KIT Part Number
31214-***** as the Primary Failed Part.
Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
HINT: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.

EXPENSE CODE
EXPENSE CODE

DESCRIPTION

MAX AMOUNT

008

5460 Sealant

$12.46

CLAIMS INFORMATION continued on the next page.

88/91

NTB21-083A

CLAIMS INFORMATION continued.

OR
If Belt Inspection is Performed and Sub-Assembly is replaced (belt inspection shows
signs of belt slip, NG)
Submit a Primary Part (PP) type line claim using the following claims coding:
OPERATION

PFP OP CODE SYM DIAG FRT
JD01AA
CVT R&R
(2)
JD023A
ZE
32
Inspect CVT Chain, Chain = NG (includes control (1)
JX36AA
1.1
valve R&I)
Replace CVT Sub-assembly
JX45AA
3.0
(1)
(2)

Reference the Parts Information Table and use the applicable BELT-PULLEY KIT
Part Number 31214-***** as the Primary Failed Part.
Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
HINT: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.

EXPENSE CODE
EXPENSE CODE
008

DESCRIPTION

MAX AMOUNT

5460 Sealant

$12.46

OR
If Only Control Valve is replaced:
Submit a Primary Part (PP) type line claim using the following claims coding:
OPERATION
Inspect CVT Chain, Chain = OK
Replace Control Valve
(1)
(2)

PFP OP CODE SYM DIAG
JX37AA
(1)
ZE
32
JD48AA

FRT
0.4
(2)

Reference the Parts Information Table and use the VALVE ASSY KIT-CONTROL part
number (3170E-*****) as the Primary Failed Part.
Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time.
HINT: FRT allows adequate time to access DTC codes. No other diagnostic
procedures subsequently required. Do NOT claim any diagnostic OP Codes with this
claim.

89/91

NTB21-083A

THRUST BEARINGS
A.

DESCRIPTION

PART #: 314071XZ0B or X270A
1XZ0C or X270B
1XZ0D or X270C
1XZ0E or X270D
THRUST BEARING
1XZ1A or X270E
1XZ1B or X271A
1XZ1C or X271B
1XZ1D or X271C

K.

BEARING THICKNESS

QTY

3.57 mm
3.75 mm
3.93 mm
4.1 mm
4.28 mm
4.46 mm
4.61 mm
4.79 mm

1 of each is
included in the
Pulley Kit. Select
1 for installation.

PART KITS VISUAL REFERENCE
The following Figures show the smaller components of BELT-PULLEY KIT.


KIT- CONTROL VALVE is not shown.

Figure 175 shows
the assorted
seals, O-rings,
etc. in “BELTPULLEY KIT”

Figure 175

90/91

NTB21-083A

PART KITS VISUAL REFERENCE - CONTINUED
PUMP ASSY-OIL parts

BRG ASSY-THRUST NEEDLE parts

Figure 176

Figure 177

REMINDER! Attach the following to the repair order:


Total End Play calculation (Page 60)



C-III plus screen showing the current calibration data (Step 139 on page 80)



C-III plus screen showing the new calibration data (Step 155 on page 81)

AMENDMENT HISTORY
DATE

REFERENCE

September 16, 2021

NTB21-083

December 7, 2021

NTB21-083A

DESCRIPTION
Original bulletin published
Thrust bearing part number options added to
tables on pages 61 and 90

91/91

NTB21-083A