NHTSA ID Number: 10206371
Manufacturer Communication Number: NTB16-110Q
TSB/Document Date: 2022-01-08
Summary
2013-2017 ALTIMA AND 2014-2017 ROGUE; 4 CYLINDER WITH DTC P17F0, P17F1, P0776, P2813, P1715, AND/OR P0841 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Classification:
Reference:
AT16-001Q
Date:
NTB16-110Q
December 7, 2021
2013-2017 ALTIMA AND 2014-2017 ROGUE; 4 CYLINDER
WITH DTC P17F0, P17F1, P0776, P2813, P1715, AND/OR P0841
STORED
This bulletin has been amended. See AMENDMENT HISTORY on the last page.
Please discard previous versions of this bulletin.
APPLIED VEHICLES:
APPLIED ENGINE:
2013-2017 Altima (L33)
2014-2017 Rogue (T32)
QR25DE (4 cylinder only)
IF YOU CONFIRM
Any combination of the following DTCs:
P0776, P2813, P0841, P17F0, P17F1, P1715
IMPORTANT:
If DTCs are stored other than those listed above, this bulletin does not apply.
If customer complains of engine stall while going from 'P' or 'N' range to 'R' or 'D'
range, this bulletin does not apply.
If only combinations of the judder DTCs P17F0 and P17F1 exist with no customer
complaint, this bulletin does not apply.
If only P1715 exists with no other DTCs, this bulletin does not apply.
NTB15-083, Enhanced Diagnostic Logic For CVT Judder, has reprogramming
instructions that may apply.
ACTION
See Repair Flow Chart on page 2 to confirm if this bulletin applies.
NOTE: Pages 59, 86 and 102 must be printed and attached to the repair order.
Nissan
Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/106
Repair Flow Chart
A.
Does any combination of the following DTCs exist?
No
P17F0, P17F1, P0776, P2813, P0841, P1715
Yes
Yes
Does only P1715 exist?
No
Does only a combination of P17F1, P17F0 exist
with no other DTCs
and NO customer complaint of Judder?
Yes
No
Customer complains of engine stall while going
from “P” or “N” range to “R” or “D” or “L” range?
Yes
This bulletin does not
apply
Refer to ASIST for
further diagnostic
information.
No
Does P17F0 exist?
Yes
No
Evidence of CVT belt slippage?
Page 8
Yes
No
a. Replace the sub-assembly. Page 17
And then
Install a new valve body only
b. Install a new control valve (valve
body). Page 71
Page 71
Check TCM part number
and if needed perform reprogramming
Step 139 on Page 80
IMPORTANT: Reprogramming, if needed, must be
done before performing additional services.
Perform ADDITIONAL SERVICE WHEN
REPLACING CONTROL VALVE. Page 86
2/106
NTB16-110Q
Table of Contents
Required Tools / Material…………………………………………………….……
Essential Tools………………………………………………………………….….. page 4
Weights………………………………………………………………………………
page 6
Precautions when Disassembling a CVT Assembly……………………………
page 7
Control Valve (Valve Body) Removal and CVT Belt Inspection……………….
page 8
CVT Assembly Removal…………………………………………………………... page 17
Remove the Converter Housing, Oil Seals, Oil Pump Cover, Oil Pump and
Oil Filter…………………………………………………………………………...…
page 20
Clean the CVT case surfaces……...……………………...................................
page 28
Clean the Oil Passages in the CVT Case, Oil Pump Cover, and CVT Filter
Area………………………………………………………………………………….
page 29
New Oil Pump Installation………….………………………………………….….
page 31
Replace the Side Cover – Pulleys and Belt (sub-assembly)……………….….
page 33
Clutch Total Endplay Adjustment – Thrust Bearing Selection…………………
page 56
Clean the Converter Housing Passages…………………………………………
page 61
CVT Reassembly…………………………………………………………………...
page 63
Control Valve (Valve Body) Strainer and Pan Installation……………………..
page 71
Install the CVT Assembly………………………………………………………….
page 77
TCM Reprograming.……………………….………………………………………
page 79
Perform ADDITIONAL SERVICE WHEN REPLACING CONTROL
VALVE……………………………………………………………………………….
page 86
Troubleshooting……………………………………………………………………
page 92
PARTS INFORMATION…………………………………………………………… page 94
CLAIMS INFORMATION………………………………………………………….. page 100
PARTS KITS REFERENCE TABLE…………………………………….…..
3/106
page 4
page 102
NTB16-110Q
Required Tools / Materials
B.
Cherry picker / engine hoist / lifting arm (never handle replacement CVT
sub-assembly by hand)
Strap or chain to lift and lower CVT and sub-assembly
Petroleum jelly or equivalent
Extendable magnet
Large clean surface / 1 to 2 work tables
Vernier calipers
Brake cleaner
Rubbing alcohol
Plastic scraper
Essential Tools
Additional Essential Tools are available from Tech•Mate online: www.nissantechmate.com,
or by phone: 1-800-662-2001.
J-50255
CVT Service Tool Kit
J-50818
CVT2 Oil Pump
Seal Installer
J-25721-A
Slide Hammer Set
J-50272
Digital Depth
Gauge
J-51923
J-Hook Case
Separator
J-50271
Gauge Block
J-8092
Driver Handle
J-52282
Output Seal Installer
Figure 1
4/106
J-52281
CVT Case Differential
Seal Installer
NTB16-110Q
Essential Tools (continued)
Tools that are not indicated as specifically for one model are used for all models.
C.
J-51959
Guide Pins
Figure 2
CAUTION: Always handle the CVT and component assemblies carefully and with the
appropriate lifting tools.
J-51595-1
Eyelet & linkage
J-51595
Lifting Fixture (top)
Figure 3
J-52082
Use for Rogue
Only
J-52082-2
Figure 4
5/106
NTB16-110Q
Essential Tools (continued)
CAUTION: Always handle the CVT and component assemblies carefully and with the
appropriate lifting tools.
J-51909
Lifting Fixture (side cover)
Use for Altima
only
Figure 5
Tech Cam J-51951
Lens swab J-51963
(not part of J-51951)
Figure 6
D.
Remove protective
film before first use
Additional Tech Cam J-51951 kits or components are available from Tech•Mate.
Weights
CVT assembly: 300 lbs. approximately
CVT sub-assembly: 65 lbs. approximately
6/106
NTB16-110Q
SERVICE PROCEDURE
IMPORTANT: Repairs performed for this bulletin require CONSULT-III plus Diagnostic
result reporting function-Setting be turned ON and Diagnosis (All Systems) be performed. If
not done, it may result in a repair being non-warrantable.
E.
Precautions when Disassembling a CVT Assembly
Transmissions are vulnerable to particles (dust, metal, lint, etc.).
When disassembling a CVT, make sure your work environment (shop, workbench, etc.),
transmission area (sub-frame, oil pan, harness connector, etc.), and your hands are free of
contamination.
IMPORTANT:
Wash and clean the exterior of the CVT assembly prior to disassembling.
CAUTION: Cover all air breather and drive shaft holes to prevent water intrusion.
Apply rust penetrant to locator / dowel pins on torque converter housing and side
cover of CVT and allow to soak as needed.
Refrigerating oil seals may help in assembly (axle and T/C seals).
Only disassemble those parts which are mentioned in this bulletin.
Make sure all parts are clean prior to assembling / installing.
Unpack service parts just before installation.
Store the related parts that have
been removed separately to prevent
being mixed up; small cups can be
used.
Figure 7
IMPORTANT: The CVT unit “wiring harness
connector” will be reused during this
procedure. The wiring harness can be
disconnected from the valve body at the
wiring harness connector and remain in the
CVT.
Figure 8
7/106
NTB16-110Q
Control Valve (Valve Body) Removal and CVT Belt Inspection
1. Write down all radio station presets.
Presets
AM
FM 1
FM 2
SAT 1
SAT 2/3
Bass
1
Treble
2
3
4
Balance
Fade
5
6
Speed Sen. Vol.
2. Disconnect both battery cables, negative cable first.
3. Remove the valve body.
Before lifting the vehicle;
Place the transmission gear selector in Neutral.
Refer to the appropriate ESM, section Transaxle & Transmission, for valve body
removal.
NOTE: The number ‘7’ is on the head of all bolts that need to be removed for valve
body removal. Do not remove any bolt that does not have the number ‘7’.
CAUTION: Never allow any chemicals or fluids other than NS-3 CVT fluid or
equivalent to enter the CVT assembly. Never allow any foreign debris, dust,
dirt, etc. to enter the CVT assembly.
For additional information, see video # 544: “CVT Belt Inspection”. This video is
located under the TECH TRAINING GARAGE VIDEOS tab in Virtual Academy.
8/106
NTB16-110Q
Exploded View
(Total of 9 bolts)
Figure 9
1.
Transaxle assembly
2.
Terminal cord assembly
3.
CVT fluid temperature sensor
bracket
4.
Control valve
5.
Bracket
6.
7.
New-style oil strainer assembly
8.
Old-style oil strainer assembly
9.
Oil pan gasket
10.
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB16-110Q
Replacement Service Bulletin Number:
MFR Communication Date: 2021-12-07
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:MECHANICAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.