NHTSA ID Number: 10205913
Manufacturer Communication Number: 15-236-18R
TSB/Document Date: 2022-01-04
Summary
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3.1 Audio and Navigation head units.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-236-18R
Replacement Service Bulletin Number:
MFR Communication Date: 2021-12-06
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
ATTENTION:
GENERAL MANAGER
q
PARTS MANAGER
q
CLAIMS PERSONNEL
q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
q
© 2018 Subaru
of America, Inc. All rights reserved.
SERVICE BULLETIN
APPLICABILITY: 2019-22MY Impreza
2019-22MY Crosstrek (Including Hybrid Model)
2019-22MY Forester
2019MY Legacy/ Outback
2019-22MY WRX
2019-22MY WRX STI
2019-22MY BRZ- Navigation -equipped ONLY
2019-22MY Ascent
SUBJECT:
NUMBER: 15-236-18R
DATE: 12/04/18
REVISED: 12/06/21
Reprogramming File Availability for Optimization of Harman Gen 3.1
and Gen 3.1α Audio and Navigation Head Units
INTRODUCTION:
The following information addresses reprogramming file availability and a software update
installation procedure to provide optimization to the new Harman Gen 3.1 Audio and Navigation
head units utilized in the models as listed above. The procedure will involve either downloading
the software update files from Subarunet (or using those sent directly from Nuspire) and transferring
them onto a flash drive for head unit installation. These files do NOT include Map Update data. It is
VERY IMPORTANT to read and understand this information completely to understand all changes
from prior releases before proceeding.
A time line chart along with a complete list of all the conditions addressed by this and previous
Harman 3.1 and Gen 3.1α software updates is provided in “Appendix A” located at the end of this
bulletin.
IMPORTANT NOTES:
•
If a vehicle presents with a current blank or black screen condition, request an exchange unit.
•
Be sure to locate and re-format any existing USB drives used for updating Harman audio
units in order to fully clear them before adding these new files to them.
•
On BRZ models, this update applicable to HIGH / Navigation-equipped head units only.
•
If a Map update is pending, please follow the instructions posted on Subarunet: Service
Operations & Technical > Forms/Downloads > Navigation System Map Updates and select
the applicable link.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard
for
excellence
in
Environmental
Management Systems. Please recycle
or dispose of automotive products in a
manner that is friendly to our environment
and in accordance with all local, state
and federal laws and regulations.
Continued...
Bulletin Number: 15-236-18R; Revised: 12/06/21
Page 1 of 21
PRODUCTION CHANGE INFORMATION:
These updates (December 2020) apply to the models listed
above equipped with Harman Gen 3.1 and Gen 3.1α Audio and
Navigation head units only.
The latest software version (including all available updates) was
incorporated into production per the starting VIN table to the
right:
Model
Starting VIN
Legacy
TBD
Outback
TBD
Impreza 4-Door
TBD
Impreza 5-Door
TBD
Crosstrek
TBD
BRZ*
TBD
Forester
TBD
Ascent
TBD
*HIGH / Navigation - equipped head units only
PART INFORMATION:
Multimedia System Type
Descriptive Features
6.5 Inch Display Audio System (Base)
No CD slot / Eject Button
6.5 Inch Display Audio System (Base +)
Equipped with CD Player and Eject Button
8.0 Inch Display Audio System (Mid)
Phone Button
8.0 Inch Audio / Navigation System (High)
Map Button but no Phone Button
Reference photos of each head unit faceplate are supplied below:
BASE +
Uses MID
update file
Continued...
Bulletin Number: 15-236-18R; Revised: 12/06/21
Page 2 of 21
Materials Required:
An empty, USB 2.0 or 3.0 storage device (flash drive) will be needed to perform the update
procedure. The device should be dedicated to storing and transferring these updating files only. It
must be a minimum of 16GB or more in size and contain a NTFS file format before downloading the
update files onto it.
IMPORTANT NOTES:
•
NEVER change the update file names after downloading them.
•
NEVER save any other files on the same flash drive.
There are various types of USB flash drive available from many suppliers. If the head unit does NOT
recognize the USB drive during the reprogramming process, due to controller IC type of USB drive
or compatibility with the head unit, clear the file and re-format the flash drive for “FAT32” as outlined
below in Step 2 instead of “NTFS”. If a recognition problem persists, use USB flash drive from
another manufacturer.
Recommended Flash Drives:
•
Kingston®: Data Traveler G3, G4, SE9 or the Hyper-X Series
•
SanDisk®: Cruzer Series, Ultra Flair
•
Transcend®: JetFlash 300, 600 or 790
•
Verbatim®: Store ‘n’ Go
Continued...
Bulletin Number: 15-236-18R; Revised: 12/06/21
Page 3 of 21
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
Step 1- Software Version Confirmation From the HOME screen, touch “Settings”.
After starting the engine, from the HOME screen, touch “Settings”.
•
From the Settings screen, scroll down to and then touch “System Information”.
•
The currently installed software version will be displayed. If the Software Version is
Rel_UA.19.36.70 or Rel_UF.20.28.70, (or before), proceed to Step 2. This version number
is the same for all 4 levels of head unit.
VERY IMPORTANT: If the current version is Rel_UA.21.41.70, Rel_UH.20.52.70, Rel_
UA.20.38.70, Rel_UA.20.41.70 or Rel_UH.21.13.70, STOP as the latest version has already been
installed and no update is required at this time.
Continued...
Bulletin Number: 15-236-18R; Revised: 12/06/21
Page 4 of 21
STEP 2- Prepare the USB:
CAUTION: Do not use any USB flash drive which utilizes file organizing software or an operating
system.
VERY IMPORTANT: Before attempting to download any data files, confirm the PC and flash drive
being used is not infected with any virus. The flash drive MUST be formatted for NTFS .
•
Make sure the USB flash drive contains no
other files.
•
Right click on the corresponding
“Removable Disk”.
•
Select “Format”.
•
From the File System drop-down menu,
select “NTFS”
•
Check the “Quick Format” box (if not
already done).
•
Click on “Start” to format the USB flash
drive.
STEP 3- Download the Update Files to the USB:
VERY IMPORTANT: When updating a “Base +” head unit, the “MID” update files must be used.
The files are available for download on Subarunet (see “A” below).
The applicable reprogramming files have also been sent directly to retailers by Nuspire in the same
way a Select Monitor Update would be pushed out. (see “B” below).
Follow “A” when using files downloaded from Subarunet.
Follow “B” when using the files sent directly to the SDS notebook from Nuspire.
Continued...
Bulletin Number: 15-236-18R; Revised: 12/06/21
Page 5 of 21
“A” When using update files downloaded from Subarunet:
Click Here to Access the Downloads for Audio/Navigation Information on Subarunet
IMPORTANT: Files downloaded from Subarunet will be .zip files and must be unzipped before
they can be used. Using the normal audio / navigation system file update download procedure: Go
to Subarunet, select Service Operations and Technical>>Forms/Downloads>>Gen 3/Harman for
Audio/Navi then click on the applicable Hyperlink to download the file(s) to the SDS Notebook or
PC:
BASE- 2020-21 Impreza_Crosstrek_Crosstrek Hybrid & 2019 Legacy-Outback HARMAN AUDIO
UPDATE - DECEMBER 2020
BASE PLUS or MID - 2020-21 Impreza_Crosstrek Crosstrek Hybrid_Forester_Ascent & WRX - 2019
Legacy-Outback HARMAN AUDIO UPDATE - DECEMBER 2020
HIGH - 2020-21 Impreza_Crosstrek_Crosstrek Hybrid_BRZ_Forester_Ascent_WRX & 2019 LegacyOutback HARMAN AUDIO UPDATE - DECEMBER 2020
•
Go to Downloads.
•
CAUTION: After download is complete, NEVER change the file or folder names.
•
Once the files have been downloaded from Subarunet, click on the Downloads folder and then
sort by Date Modified to bring the most recent files to the top of the list.
•
Open / display the contents of File folder, for example (HIGH - 2019-20 Impreza_Crosstrek_
Crosstrek Hybrid_BRZ_Forester_Ascent_WRX & 2019 Legacy-Outback HARMAN AUDIO
UPDATE - DECEMBER 2019).
•
Click on “Extract All Files”.
•
From the dialog box, browse to My Documents then click on “Extract”.
•
Double-click on the required file (for this example, select the file entitled “HIGH - 2019-20
Impreza_Crosstrek_Crosstrek Hybrid_BRZ_Forester_Ascent_WRX & 2019 Legacy-Outback
HARMAN AUDIO UPDATE - DECEMBER 2019”).
•
Copy ONLY the “update” folder then paste (or click / drag) it to the “clean” USB flash drive
as listed (Removable Disk) in the directory.
•
To avoid confusion, label each flash drive with the file contents (e.g. BASE 3.1, BASE PLUS
or MID 3.1 or HIGH 3.1).
•
Go to Step 4.
Continued...
Bulletin Number: 15-236-18R; Revised: 12/06/21
Page 6 of 21
“B” When using update files sent directly from Nuspire:
•
Go to My Documents on the GUI screen to display the list of available update files shown
below.
•
CAUTION: After download is complete, NEVER change the file or folder names.
•
Sort by Date Modified to bring the most recent files to the top of the list. The folder is named:
_Harman Audio-Navi Update Files.
•
Double-click on the required file (for this example, select the file entitled “HIGH - 2019-20
Impreza_Crosstrek_Crosstrek Hybrid_BRZ_Forester_Ascent_WRX & 2019 Legacy-Outback
HARMAN AUDIO UPDATE - DECEMBER 2019”) and the update file will display as
shown.
•
Select the update folder and either copy / paste or click / drag it to the USB flash drive.
NOTE: Do not copy the entire “HIGH-20…” File folder. Copy ONLY the File folder named
“update” to the flash drive
•
Once the folder named “update” is loaded onto the USB flash drive, right click on the drive
and select “Eject”.
•
Remove the USB flash drive after the prompt appears that says “Safe to Remove Hardware”.
•
Mark the USB to indicate the head unit it will update (HIGH 3.1 in this example).
•
Repeat the above steps to create the BASE PLUS or MID 3.1 and HIGH 3.1 USB flash drives
as needed using a separate USB drive for each update folder.
STEP 4- IMPORTANT: Confirm the update folder on the USB flash drive is for the head unit being
reprogrammed ONLY. NEVER install multiple update folders onto the same flash drive at the same
time.
IMPORTANT REMINDER: When updating a “Base +” head unit, the “BASE PLUS or MID 3.1”
update files must be used.
Continued...
Bulletin Number: 15-236-18R; Revised: 12/06/21
Page 7 of 21
•
After confirmation, move to the car and either start the engine or follow the procedure as
outlined in document GR8-1100 on STIS for use of the GR8’s Power Supply Mode.
HIGH - 2019-20 Impreza_Crosstrek_Crosstrek Hybrid_BRZ_Forester_Ascent_WRX & 2019 Leg...
Copy ONLY the folder named “update” to the USB.
•
Never change the folder name from “update”.
•
Confirm there is only a folder named “update” on the flash drive.
CAUTION: Confirm one final time the head unit you are about to update matches the update file
selected. Attempting to install the incorrect update file will disable the head unit.
STEP 5- Update Installation:
IMPORTANT: Always record the customer’s radio station presets and navigation favorites (where
applicable) before proceeding further as they will most likely need to be reset once the update and
re-boot procedures are completed. In addition, some customizable system settings may need to be
reset as they may return to the default setting during the update.
•
With the engine idling (or GR8 connected), plug the flash drive into the USB Port.
IMPORTANT NOTE: If the head unit does not recognize the USB flash drive during the
reprogramming process, this may be due to an incompatible Controller IC in the USB flash drive or
it is otherwise incompatible with the head unit. If this occurs, delete all files from the flash drive and
re-format it to “FAT32”, instead of “NTFS” and reload the appropriate “update” folder to the USB
flash drive. If the USB flash drive is still not recognized, please discontinue the use of that drive and
instead use a USB flash drive from a different manufacturer.
Continued...
Bulletin Number: 15-236-18R; Revised: 12/06/21
Page 8 of 21
•
After the unit “authenticates” the USB flash drive, press “Next” and after the second screen is
displayed, press “Next” again.
NOTE: If an attempt is made to install the wrong “grade” file into the wrong grade head unit
(EXAMPLE: “Base” update file into a “Base Plus or Mid” or “High” head unit), the USB
Authentication error screen below will be displayed:
•
The current and available software version information will be displayed. The Available
Version I.D should be Rel.20.38.70.
•
After confirming the Available Version, press “Install Now” to start the reprogramming
process. The screen will go blank (black) for a brief period after installation begins.
•
Each of the updates (Base, Mid and High) should take less than 10 minutes to install.
Continued...
Bulletin Number: 15-236-18R; Revised: 12/06/21
Page 9 of 21
IMPORTANT NOTES:
• Do not leave the vehicle once the update begins as ignoring pop-up requests may lead to
battery discharge.
•
Do not touch any of the buttons on the head unit while the updating process is taking place.
•
If during the updating an error screen is displayed asking “Do you want to Retry”, press
“Retry” to restart the update.
•
Once the updating process is complete, the head unit will perform a “soft” reboot.
(NOTE: several “hard” reboots are required to fully install the update. This procedure is
covered in Step 6 below.)
•
button to
CRITICAL STEP: After the reboot process completes, press the HOME
return to the HOME screen. (NOTE: If the “install message” is displayed asking if you
want to start the update process again, press “Cancel”, press the HOME button again and
return to the HOME screen.)
STEP 6 - Turn the ignition OFF, open and close the driver’s door then remove the flash drive from
the USB port. If an error screen is displayed asking “Do you want to Retry”, press “Cancel”.
IMPORTANT: Wait AT LEAST 3 MINUTES before proceeding to Step 7.
STEP 7- Verify the newly-installed Software Version ID using the following steps:
•
Turn the ignition back ON. Confirm the “SUBARU STARLINK” screen is displayed. If
“SUBARU STARLINK” screen is NOT displayed on the first screen, system did not fully
enter “sleep mode” and reboot properly. Perform Step 6 again and wait AT LEAST 3
MINUTES before proceeding.
•
In some cases, the radio presets may not appear initially.
•
From the HOME screen, touch “Settings”.
•
From the Settings > General screen, scroll down to and then touch “System Information”.
Continued...
Bulletin Number: 15-236-18R; Revised: 12/06/21
Page 10 of 21
•
Confirm Software Version is now “Rel_UA.20.38.70,”.
- 🔥🔥🔥2026 New Functions Making X7HD the Top Dog - Big Surprise!!! ANCEL X7HD truck scanner 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>42+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM
✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages - 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions
- 🚛Advanced ECU Coding & Programming - ANCEL X7HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility
- 🚛42+ Reset Functions & Bidirectional Control - 2026 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc
- 【Extensive Compatibility】HD601 heavy duty truck scanner supports 12V & 24V commercial vehicles and all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 and Euro6). Fits for Cummins, Paccar, Detroit, Caterpillar, Freightliner, International, Peterbilt, Ford Heavy Truck, Class 4-Class 8 trucks, etc. It also supports engine diagnosis on most cars, minivans, light trucks and pickups
- 【 Full System Diagnostic】HD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool for Cummins, Caterpillar, Detroit, Caterpillar, Maxxforce, Bendix,Wabash, Wabaco, Haldex, Allison, Eaton heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money. Note: Only heavy truck vehicles that comply with the above protocol can diagnose the entire system
- 【Enhanced Diesel OBD Scanner】The HD601 Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics
- 【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand code definitions and helps you locate vehicle faults. Note: This device cannot directly solve the fault. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages.
- 【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work
- Why NEXAS NL102 Truck Scan Tool? The NL102 outshines other truck scanner with its extensive diagnostic features. It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Beyond read fault codes, clear codes and live data display, it enables vehicle info retrieval, freeze frame capture, and DTC lookup. Equipped with 6-pin, 9-pin, 16-pin connectors, it ensures broad truck compatibility. Plus, enjoy lifetime free updates in English, Spanish, and French, keeping your diagnostic scanner software current.
- Wide Compatibility - Friendly Reminder: To avoid compatibility issues, please confirm with us via Amazon Messages before purchasing. This heavy duty truck scanner is compatible with all heavy-duty trucks and semi that adhere to standard protocols (J1587, J1939, J1708). It covers a wide range of vehicle models, including Cummins, Detroit, Caterpillar, Freightliner, International, Kenworth, John Deere, Peterbilt, Sterling, Mack, Paccar, Western Star, Mercedes-Benz, Volvo, Scania, MAN, Renault, ERF, Foden, Seddon-Atkinson, Iveco, DAF, SISU, STEYR, ISUZU etc. Equipped with 6-pin, 9-pin, and 16-pin connectors for versatile device compatibility, ensuring stable plug-and-play connections.
- Save Hundreds of Money for All Heavy Duty Trucks – This diesel diagnostic scanner supports accurate full-system scans for all heavy-duty trucks that comply with standard protocols (J1587, J1939, and J1708). It can read and clear trouble codes across a range of vehicle systems, including the engine, transmission, instrument panel, drivetrain, brake system, suspension, ABS, ESP, EPS, fuel system, etc. The truck scanner communicates directly with your truck's computer to provide real-time data stream analysis, letting you pinpoint issues with precision. This cuts down on waste from unnecessary part replacements, saving you time and hundreds or even thousands of dollars.
- All OBD2 Functions + Battery Health Monitoring – Unlike many obd2 scanners on the market that only cover partial OBD2 features, ours gives you full OBD2 capability: read & clear codes, live data, freeze frame data, I/M readiness checks, EVAP tests, on-board monitor, O2 sensor tests, vehicle info, and DTC lookup. That means more detailed insights for pros and DIYers alike. The NL102 isn't just a code scanner – it's a battery saver. Regularly check your car's battery health, and catch issues before it dies completely. No more unexpected no-starts in the driveway or on the road. It diagnoses battery condition accurately, helping you avoid costly last-minute repairs.
- Plug and Play & One-click for DTC: NEXAS diesel scanner is user-friendly. It comes with an intuitive screen and easy-to-understand interface, making it accessible even for non-professionals to get started. And the built-in DTC library in the code reader allows you to directly retrieve codes without searching for definitions in books, making it easier to understand the code definitions and solve problems more quickly.
This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API