Loading...

NHTSA ID Number: 10205724

Manufacturer Communication Number: 21M03-S1

TSB/Document Date: 2022-01-03


Summary

Certain 2017-2019 Model Year Transit Vehicles with a 3.2L Diesel Engine EGR Cooler Replacement Vehicles Covered By This Program: The build date range for the affected vehicles was incorrectly listed as June 4, 2015 through October 24, 2019. The correct build date range is June 21, 2017 through October 24, 2019.


David J. Johnson
Director
Service Engineering Operations
FordeBay logo Customer Service Division

Ford Motor Company
P. O. Box 1904
Dearborn, Michigan 48121

December 3, 2021
TO:

All U.S. Ford and LincolneBay logo Dealers

SUBJECT:

Customer Satisfaction Program 21M03 - Supplement #1
Certain 2017-2019 Model Year Transit Vehicles with a 3.2L Diesel Engine
EGR Cooler Replacement

REF:

Customer Satisfaction Program 21M03
Dated November 4, 2021

New! REASON FOR THIS SUPPLEMENT
Vehicles Covered By This Program: The build date range for the affected vehicles was incorrectly
listed as June 4, 2015 through October 24, 2019. The correct build date range is June 21, 2017
through October 24, 2019. All affected vehicles were correctly identified in OASIS.
PROGRAM TERMS
This program extends the warranty coverage of the Exhaust Gas Recirculation (EGR) cooler to 11
years of service or 120,000 miles from the warranty start date of the vehicle, whichever occurs first.
This program may be used multiple times as long as the vehicle is within time and mileage limits of
the program. Once the program has expired, SPW and ESP may be eligible.
If a vehicle has already exceeded either the time or mileage limits, this extended warranty coverage
will last through May 31, 2022.
Coverage is automatically transferred to subsequent owners.
New! VEHICLES COVERED BY THIS PROGRAM
Vehicle
Model Year
Assembly Plant
Transit

2017-2019

Kansas City

Build Dates
June 21, 2017 through October 24, 2019

Affected vehicles are identified in OASIS.
REASON FOR PROVIDING EXTENDED WARRANTY COVERAGE
In some of the affected vehicles, the EGR cooler may crack and allow coolant to enter the combustion
chamber when EGR is enabled. A cracked EGR cooler may cause malfunction indicator light (MIL)
illumination, reduced power, engine overheating, white smoke from the exhaust, and/or coolant level
low without an exterior leak.
SERVICE ACTION
If an affected vehicle exhibits any of the conditions listed above, dealers must perform Workshop
Manual (WSM) and/or Powertrain Control/Emissions Diagnosis (PC/ED) manual diagnostics to
determine the root cause of the failure. If the EGR cooler is found to be at fault, dealers are to replace
the EGR cooler. This service must be performed at no charge to the vehicle owner.

© Copyright 2021 FordeBay logo Motor Company

OWNER NOTIFICATION MAILING SCHEDULE
Owner Letters are expected to be mailed the week of December 6, 2021. Dealers should repair any
affected vehicles that experience an EGR cooler failure, whether or not the customer has received a
letter.
ATTACHMENTS
Attachment I:
Administrative Information
Attachment II:
Labor Allowances and Parts Ordering Information
Attachment III:
Technical Information
Owner Notification Letter
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web
Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician
Society (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or
listed under the SSSC tab.
Sincerely,

David J. Johnson

© Copyright 2021 Ford Motor Company

ATTACHMENT I
Page 1 of 3
Customer Satisfaction Program 21M03 - Supplement #1
Certain 2017-2019 Model Year Transit Vehicles with a 3.2L Diesel Engine
EGR Cooler Replacement
OASIS ACTIVATION
OASIS was activated on November 4, 2021.
FSA VIN LISTS ACTIVATION
FSA VIN Lists will not be activated for this service action.
SOLD VEHICLES
• Only owners with affected vehicles that exhibit the covered condition will be directed to dealers
for repairs.
• Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle
inventory.
STOCK VEHICLES
• Do not perform this program unless the affected vehicle exhibits the covered condition.
TITLE BRANDED / SALVAGED VEHICLES
Title branded, salvaged vehicles and vehicles with cancelled warranty coverage are eligible for this
program unless emission coverage is explicitly cancelled, as indicated by one of the following OASIS
Warranty Cancellation Messages only:
• SCRAPPED UNIT – ALL WARRANTY CANCELLED – TOTAL INCLUDING EMISSIONS
• ALL WARRANTY CANCELLED INCLUDING EMISSIONS
OWNER REFUNDS
FordeBay logo Motor Company is offering a refund for owner-paid repairs covered by this program if the
repair was performed before the date of the Owner Notification Letter. This refund offer expires
November 30, 2022.
• Dealers are also pre-approved to refund owner-paid emergency repairs that were performed
away from an authorized servicing dealer after the date of the Owner Notification Letter. Noncovered repairs, or those judged by Ford to be excessive, will not be reimbursed.
• Refunds will only be provided for the cost associated with EGR cooler replacement.
RENTAL VEHICLES
Dealers are pre-approved for up to two days for a rental vehicle. Follow Extended Service Plan (ESP)
guidelines for dollar amounts. Rentals will only be reimbursed for the day(s) the vehicle is at the
dealership for part replacement. Prior approval for more than two rental days is required from the
SSSC via the SSSC Web Contact Site.

© Copyright 2021 Ford Motor Company

ATTACHMENT I
Page 2 of 3
Customer Satisfaction Program 21M03 - Supplement #1
Certain 2017-2019 Model Year Transit Vehicles with a 3.2L Diesel Engine
EGR Cooler Replacement
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
• For related damage and access time requirements, refer to the Warranty and Policy Manual –
Section 6 – Ford & LincolneBay logo Program Policies / General Information & Special Circumstances
for FSA’s / Related Damage.
• For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is
required, although related damage must be on a separate repair line with the Related Damage
radio button checked.
o Ford vehicles – 3 years or 36,000 miles
• For vehicles outside new vehicle bumper-to-bumper warranty coverage, submit an Approval
Request to the SSSC Web Contact Site prior to completing the repair.
CLAIMS PREPARATION AND SUBMISSION
• Note: All repairs for this program should be claimed using the claim entry direction below
regardless if the vehicle is still under the New Vehicle Limited Warranty.
o Service Part Warranty (SPW) and/or FordeBay logo/LincolneBay logo Loyalty Plans (ESP) eligible vehicles –
Claim repairs to FSA 21M03 if vehicle is still within time and mileage limits.
• Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty
Solution (OWS) online.
o When entering claims:
▪ Claim type 31: Field Service Action. The FSA number (21M03) is the sub code.
▪ Customer Concern Code (CCC): E23 – Engine Overheats/Radiator Troubles
▪ Condition Code (CC): 42 – Does Not Operate Properly
▪ Causal Part Number: 9U433 – EGR Cooler
▪ Part Quantity: 0
o For additional claims preparation and submission information, refer to the Recall and
Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
• Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a
separate repair line from the FSA with same claim type and sub code as described in Claim
Entry above.
IMPORTANT: Click the Related Damage Indicator radio button.
• Provision for Locally Obtained Supply: Includes Penetrating and Lock Lubricant (XL-1),
High Temperature Nickel Anti-Seize Lubricant (XL-2), Motorcraft® Yellow Concentrated
Antifreeze/Coolant (VC-13G) or Motorcraft® Yellow Prediluted Antifreeze/Coolant (VC-13DLG), 5W40 Diesel Motor Oil and one 1/4-inch to 5/8-inch (6 mm to 16 mm) diameter
Conventional (Worm) Clamp.
o Program Code: 21M03
o Misc Expense: OTHER
o Amount: Actual cost up to $6.00 if Antifreeze/Coolant is not required. Actual cost up to
$30.00 if Antifreeze/Coolant is required.

© Copyright 2021 Ford Motor Company

ATTACHMENT I
Page 3 of 3
Customer Satisfaction Program 21M03 - Supplement #1
Certain 2017-2019 Model Year Transit Vehicles with a 3.2L Diesel Engine
EGR Cooler Replacement

Rentals: For rental vehicle claiming, follow Extended Service Plan (ESP) guidelines for dollar
amounts. Enter the total amount of the rental expense under Miscellaneous Expense code
RENTAL.
Refunds: Submit refunds on a separate repair line.
- Program Code: 21M03
- Misc. Expense: ADMIN
- Misc. Expense: REFUND
- Misc. Expense: 0.2 Hrs.
o Multiple refunds should be submitted on one repair line and the invoice details for each
repair should be detailed in the comments section of the claim.

© Copyright 2021 Ford Motor Company

ATTACHMENT II
Page 1 of 2
Customer Satisfaction Program 21M03 - Supplement #1
Certain 2017-2019 Model Year Transit Vehicles with a 3.2L Diesel Engine
EGR Cooler Replacement
LABOR ALLOWANCES
Description
Diagnose EGR cooler using published diagnostics in WSM
and PC/ED – includes drive in/drive out, etc.
(Use in combination with 21M03C only)

Labor Operation

Labor Time

MT21M03B

Actual time up
to 1.5 Hours*

21M03C
5.9 Hours
Replace EGR cooler
* Dealers are authorized to claim up to 1.5 hours actual time without contacting the SSSC Web
Contact Site for approval. Follow the Actual Time Usage Guidelines and Service Management
Responsibilities as identified in the Warranty and Policy Manual. Claims for additional parts and/or
labor over 1.5 hours should be submitted to the SSSC as a Related Damage contact. If contacting
SSSC, please provide the complete tech details and time stamps to support the request for the
additional time.
PARTS REQUIREMENTS / ORDERING INFORMATION
Part Number

Description

Order
Quantity

Claim
Quantity

CK4Z-9U433-D

EGR Cooler

1

1

CK4Z-9D476-A

EGR Cooler Gasket

1

1

BK2Z-9E464-A

EGR Valve Gasket

1

1

6C1Z-9E464-A

Mixer Tube Gasket

1

1

BB3Z-6C653-A

Throttle Body Gasket

1

1

CK4Z-9F481-A

EGR Cooler Vee-Clamp

1

1

W520101-S437

EGR Cooler Vee-Clamp Nut

1

1

XL-1

Penetrating and Lock Lubricant*

XL-2

High Temperature Nickel Anti-Seize Lubricant*

XO-5W40-5Q3SD

Motorcraft® SAE 5W-40 Full Synthetic Diesel Motor
Oil*

VC-13G

Motorcraft® Yellow Concentrated Antifreeze/Coolant**

VC-13DL-G

Motorcraft® Yellow Prediluted Antifreeze/Coolant**

MISC. OTHER

One 1/4-inch to 5/8-inch (6 mm to 16 mm) Diameter
Conventional (Worm) Clamp
* The listed chemicals can be used for multiple repairs.
** Antifreeze/Coolant is only required if the vehicle has lost coolant as the result of an EGR cooler
failure, or if cooling system top-off is required after repairs are completed.
NOTE: Both antifreeze/coolant listed above are approved for the vehicles.
Order your parts requirements through normal order processing channels. To guarantee the shortest
delivery time, an emergency order for parts must be placed.
Obtain Locally

© Copyright 2021 FordeBay logo Motor Company

ATTACHMENT II
Page 2 of 2
Customer Satisfaction Program 21M03 - Supplement #1
Certain 2017-2019 Model Year Transit Vehicles with a 3.2L Diesel Engine
EGR Cooler Replacement
DEALER PRICE
For latest prices, refer to DOES II.
PARTS RETENTION, RETURN & Scrapping
Follow the provisions of the Warranty and Policy Manual, Section 1 - WARRANTY PARTS
RETENTION AND RETURN POLICIES. If a replaced part receives a scrap disposition, the part must
be scrapped in accordance with all applicable local, state and federal environmental protection and
hazardous material regulations.
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in
accordance with Policy Procedure Bulletin 4000.
REPLACED FSA PARTS INSPECTION AND SIGN OFF
Effective March 1st 2021 all parts replaced as part of an FSA repair with a repair order open date of
March 1st 2021 or later must be inspected and signed off on the repair order by a member of your
dealers fixed operations management team or an employee the task has been delegated to. If the
task is to be delegated to a non-management employee, the employee needs to be someone other
than the technician who completed the repair and needs to understand the importance of completing
this task consistently and accurately.

All parts replaced as part of an FSA repair should be returned to the parts department
following the Warranty Parts Retention and Return Policies.

Inspect the replaced parts to verify the FSA repair was completed.

If the FSA repair is found to be complete, the designated employee signs the repair order line
or parts return stamp area (electronic or hand signed) for the FSA repair indicating the parts
were inspected and validated to have been replaced.

After the parts have been inspected, they should be handled based on the guidance in the
parts status report in the Online Warranty System (Hold, Return, CORE, Scrap, etc.).

This process is subject to review during warranty audits for FSA repairs with a repair order
open date of March 1st 2021 or later. Any eligible FSA claims requiring parts replacement,
found not to have been inspected and signed off during a warranty audit will be subject to
chargeback and consideration for enrollment into the Dealer Incomplete Recall Repair
Process.
Note: Other approvals (electronic or handwritten) for add-on repair lines, dealer owned vehicle
repairs, and repeat repairs do not qualify as FSA parts inspection approvals. The post repair FSA
parts inspection process (electronic or handwritten) is independent from other warranty approval
requirements. The approval by the designated employee implies that the FSA parts were found to be
replaced and must be able to be clearly identified on the Repair Order. If multiple FSA’s require
approval on a single Repair Order, each applicable occurrence will require individual post repair
approval by the designated employee.

© Copyright 2021 Ford Motor Company

ATTACHMENT III
PAGE 1 OF 1
CUSTOMER SATISFACTION PROGRAM 21M03-S1

CERTAIN 2017-2019 MODEL YEAR TRANSIT VEHICLES WITH A 3.2L DIESEL
ENGINE — EGR COOLER REPLACEMENT
SERVICE PROCEDURE
1. Using published diagnostics in Workshop Manual (WSM) and the Powertrain Control/Emissions
Diagnosis (PC/ED) manual, determine the root cause of the customer concern.
2. Is the Exhaust Gas Recirculation (EGR) cooler the root cause of the customer concern?
No - This program does not apply.
Yes - Replace the EGR Cooler. Please follow the WSM procedures in Section 303-08C.

CPR © 2021 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
12/2021

1

SaleBestseller No. 1
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
289 Reviews
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
  • J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an...
  • All-in-One OEM Diagnostics: This J2534 ECU programming tool...
  • Proven Performance You Can Trust: Backed by over 10000 real...
  • Integrated Excellence, Always Up-to-Date: Featuring the...
  • Efficiency Meets Versatility: Engineered to support three...
SaleBestseller No. 2
TOPDON RLink J2534 Reprogramming Tool, High-Speed J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Supports J2534/D-PDU/CAN-FD/DoIP, 17+ Vehicle Brands Supported
  • Advanced VCI Box, Industry-leading J2534 Pass-Thru...
  • High-Speed OEM-Level Diagnostics & Programming: Unlock true...
  • Coverage for 17 Car Brands & Ultra Reliability: Works...
  • User-Friendly RLink Platform & Expert Support: TOPDON’s...
  • 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...

If the PDF is very large, it may not load in the preview below.

Download PDF [227.77 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: 21M03-S1

Replacement Service Bulletin Number:

MFR Communication Date: 2021-12-03

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



Sale
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
108 Reviews
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Sale
XTOOL D7S Bidirectional Scan Tool, 2026 AI-Assisted OBD2 Scanner Diagnostic Tool with FCA AutoAuth, All System Car Scanner, 39+ Resets, ECU C0ding, PMI, Upgrade of D7, Crankshaft Relearn, CAN FD/DoIP
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for LincolneBay logo, and for MazdaeBay logo ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
  • Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Sale
2026 BOSSCOMM IF745 Scanner Diagnostic Tool, Check Engine Code Reader with 6 Resets, ABS Bleeder/Oil/EPB/SAS/Throttle/Battery, Scanner Diagnostic Tool for Vehicles, Lifetime Free Update, Auto VIN
  • 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
  • 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
  • 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
  • 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.​
  • 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.

This product presentation was made with AAWP plugin.

Share to...