NHTSA ID Number: 10204044
Manufacturer Communication Number: 21B35
TSB/Document Date: 2021-12-07
Summary
Certain 2020 Model Year Explorer Police Vehicles Equipped with a 3.0L EcoBoost
Engine Right-Hand Catalytic Converter and Right-Hand and Left-Hand Exhaust Flexible Pipe(s) Inspection In some of the affected vehicles, the right-hand catalytic converter, or the exhaust flexible pipes, which are downstream of the catalytic converters, may have a crack, which may cause increased noise from the exhaust system and/or an exhaust odor.
David J. Johnson
Director
Service Engineering Operations
Ford
Customer Service Division
Ford
Motor Company
P. O. Box 1904
Dearborn, Michigan 48121
November 10, 2021
TO:
All U.S. Ford
and Lincoln
Dealers
SUBJECT:
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Customer Satisfaction Program 21B35
Certain 2020 Model Year Explorer Police Vehicles Equipped with a 3.0L EcoBoost![]()
Engine
Right-Hand Catalytic Converter and Right-Hand and Left-Hand Exhaust Flexible
Pipe(s) Inspection
NEW VEHICLE / DELIVERY HOLD - Emission Recall 21E11
Certain 2020-2021 Model Year Explorer ST and Police Interceptor Vehicles Equipped
with a 3.0L EcoBoost
Engine
Left-Hand Catalytic Converter Replacement and Powertrain Control Module
Reprogram
REF:
PROGRAM TERMS
This program will be in effect through November 30, 2022. There is no mileage limit for this program.
AFFECTED VEHICLES
Vehicle
Model Year
Assembly Plant
Build Dates
Explorer
Police
2020
Chicago
November 9, 2018 through September 12, 2019
Affected vehicles are identified in OASIS and FSA VIN Lists.
REASON FOR THIS PROGRAM
In some of the affected vehicles, the right-hand catalytic converter, or the exhaust flexible pipes,
which are downstream of the catalytic converters, may have a crack, which may cause increased
noise from the exhaust system and/or an exhaust odor.
SERVICE ACTION
Before delivering any new in-stock vehicles involved in this program, dealers are to inspect the righthand catalytic converter and the right-hand and left-hand exhaust flexible pipes and replace as
necessary per the technical instructions. This service must be performed on all affected vehicles at no
charge to the vehicle owner.
OWNER NOTIFICATION MAILING SCHEDULE
Owner letters are expected to be mailed the week of November 29, 2021. Dealers should repair any
affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.
© Copyright 2021 Ford
Motor Company
ATTACHMENTS
Attachment I:
Administrative Information
Attachment II:
Labor Allowances and Parts Ordering Information
Attachment III:
Technical Information
Owner Notification Letter
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web
Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician
System (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or
listed under the SSSC tab.
Sincerely,
David J. Johnson
© Copyright 2021 Ford
Motor Company
ATTACHMENT I
Page 1 of 3
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Customer Satisfaction Program 21B35
Certain 2020 Model Year Explorer Police Vehicles Equipped with a 3.0L EcoBoost
Engine
Right-Hand Catalytic Converter and Right-Hand and Left-Hand Exhaust Flexible Pipe(s) Inspection
OASIS ACTIVATION
OASIS will be activated on November 15, 2021.
FSA VIN LISTS ACTIVATION
FSA VIN Lists will be available through https://web.fsavinlists.dealerconnection.com by
November 15, 2021. Owner names and addresses will be available by December 17, 2021.
NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle
registration records. The use of such motor vehicle registration data for any purpose other than in
connection with this program is a violation of law in several states, provinces, and countries.
Accordingly, you must limit the use of this listing to the follow-up necessary to complete this service
action.
SOLD VEHICLES
• Owners of affected vehicles will be directed to dealers for repairs.
• Immediately contact any of your affected customers whose vehicles are not on your VIN list
but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when
available) and schedule a service date.
• Correct other affected vehicles identified in OASIS which are brought to your dealership.
• Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle
inventory.
STOCK VEHICLES
• Correct all affected units in your new vehicle inventory before delivery.
• Use OASIS to identify any affected vehicles in your used vehicle inventory.
TITLE BRANDED / SALVAGED VEHICLES
Affected title branded and salvaged vehicles are eligible for this field service action.
© Copyright 2021 Ford
Motor Company
ATTACHMENT I
Page 2 of 3
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Customer Satisfaction Program 21B35
Certain 2020 Model Year Explorer Police Vehicles Equipped with a 3.0L EcoBoost
Engine
Right-Hand Catalytic Converter and Right-Hand and Left-Hand Exhaust Flexible Pipe(s) Inspection
OWNER REFUNDS
• Ford
Motor Company is offering a refund for owner-paid repairs covered by this program if the
repair was performed before the date of the Owner Notification Letter. This refund offer expires
November 30, 2022.
• Dealers are also pre-approved to refund owner-paid emergency repairs that were performed
away from an authorized servicing dealer after the date of the Owner Notification Letter. Noncovered repairs, or those judged by Ford
to be excessive, will not be reimbursed.
• Refunds will only be provided for the cost associated with the replacement of a cracked righthand catalytic converter and/or right-hand and/or left-hand exhaust flexible pipe(s).
RENTAL VEHICLES
Rental vehicles are not approved for this program.
© Copyright 2021 Ford
Motor Company
ATTACHMENT I
Page 3 of 3
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Customer Satisfaction Program 21B35
Certain 2020 Model Year Explorer Police Vehicles Equipped with a 3.0L EcoBoost
Engine
Right-Hand Catalytic Converter and Right-Hand and Left-Hand Exhaust Flexible Pipe(s) Inspection
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
• For related damage and access time requirements, refer to the Warranty and Policy Manual /
Section 6 – Ford
& Lincoln
Program Policies / General Information & Special Circumstances
for FSA’s / Related Damage.
• For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is
required, although related damage must be on a separate repair line with the “Related
Damage” radio button checked.
o Ford
vehicles – 3 years or 36,000 miles
• For vehicles outside new vehicle bumper-to-bumper warranty coverage, submit an Approval
Request to the SSSC Web Contact Site prior to completing the repair.
CLAIMS PREPARATION AND SUBMISSION
• Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty
Solution (OWS) online.
o When entering claims:
▪ Claim type 31: Field Service Action. The FSA number 21B35 is the sub code.
▪ Customer Concern Code (CCC): E41 – Unusual Exhaust system Odor
▪ Condition Code (CC): 01 – Broken/Cracked
▪ Causal Part Number: 5E212
▪ Part Quantity: 0
o For additional claims preparation and submission information, refer to the Recall and
Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
• Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a
separate repair line from the FSA with same claim type and sub code as described in Claim
Entry above.
IMPORTANT: Click the Related Damage Indicator radio button.
• Refunds: Submit refunds on a separate repair line.
- Program Code: 21B35 - Misc. Expense: ADMIN
- Misc. Expense: REFUND - Misc. Expense: 0.2 Hrs.
o Multiple refunds should be submitted on one repair line and the invoice details for each
repair should be detailed in the comments section of the claim.
• Provision for Misc. Expense for two 300 Series Stainless Steel 3” Worm-Gear Clamps 5/8”
Wide or Greater
o Program Code: 21B35
o Misc. Expense: OTHER
o Amount: Actual cost up to $20.00
© Copyright 2021 Ford
Motor Company
ATTACHMENT II
Page 1 of 4
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Customer Satisfaction Program 21B35
Certain 2020 Model Year Explorer Police Vehicles Equipped with a 3.0L EcoBoost
Engine
Right-Hand Catalytic Converter and Right-Hand and Left-Hand Exhaust Flexible Pipe(s) Inspection
LABOR ALLOWANCES
Description
Inspect the Right-Hand Catalytic Converter and the Right and Left-Hand
Flexible Exhaust Pipes – No parts replaced
Inspect and replace: Right-Hand Catalytic Converter
(can only be claimed with 21B35ZZ)
Inspect and replace: (can only be claimed with 21B35ZZ)
• Right-Hand Catalytic Converter
• Right-Hand Side Flexible Pipe
Inspect and replace: (can only be claimed with 21B35ZZ)
• Right-Hand Catalytic Converter
• Left-Hand Side Flexible Pipe
Inspect and replace: (can only be claimed with 21B35ZZ)
• Right-Hand Catalytic Converter
• Right-Hand Side Flexible Pipe
• Left-Hand Side Flexible Pipe
Inspect and replace: Right-Hand Side Flexible Pipe Only
(can only be claimed with 21B35ZZ)
Inspect and replace: Left-Hand Side Flexible Pipe Only
(can only be claimed with 21B35ZZ)
Time allowed to submit photos (cannot be claimed with 21B35A)
Labor
Operation
Labor
Time
21B35A
0.3 Hours
21B35B
1.7 Hours
21B35C
1.7 Hours
21B35D
1.8 Hours
21B35E
1.8 Hours
21B35F
0.4 Hours
21B35G
0.4 Hours
21B35ZZ
0.2 Hours
PARTS REQUIREMENTS / ORDERING INFORMATION
SSSC Web Contact Site:
The flex pipes and right-hand grass shield are not available to repair all vehicles, which require
replacement.
To place an order for the following part base part numbers 5G203 or 5E528, submit a VIN-specific
Part Order contact via the SSSC Web Contact Site, along with VIN-specific photos (see digital image
requirements below).
• If agents can easily determine if part is RH or LH, and where the part is damaged then the part
order can be expedited.
• Photos should have correct focus, proper lighting, and correct photo orientation.
Photos not required:
• Multiple photos of the vehicle
• Underbody of the vehicle
• Flex pipes showing nothing wrong
• Door labels and vehicle license plates
© Copyright 2021 Ford
Motor Company
ATTACHMENT II
Page 2 of 4
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Customer Satisfaction Program 21B35
Certain 2020 Model Year Explorer Police Vehicles Equipped with a 3.0L EcoBoost
Engine
Right-Hand Catalytic Converter and Right-Hand and Left-Hand Exhaust Flexible Pipe(s) Inspection
Photos are required:
1. RH Flex Pipe – Base Part Number -5G203a. Photo must indicate which side RH or LH
b. One photo required for each part number ordered
c. Crack must be visibly clear in the photo
2. LH Flex Pipe – Base Part Number -5G203a. Photo must indicate which side RH or LH
b. One photo required for each part number ordered
c. Crack must be visibly clear in the photo
3. Right Hand Grass Shield – Base Part Number – 5E258
a. Part should only be ordered if missing from vehicle
b. One photo required for each part number ordered
c. Photo must show grass shield missing from underbody
Order
Quantity
Claim
Quantity
Right-Hand Side Flexible Pipe
1
1
Left-Hand Side Flexible Pipe
1
1
Part Number
Description
L1MZ-5G203-FJ
L1MZ-5G203-X
As Required – Only if
Missing from Vehicle
Dealers will be notified via a DOES II communication if circumstances warrant a change in part supply
strategy and when open ordering resumes.
L1MZ-5E258-B
Right-Hand Side Grass Shield
Order the parts below through normal order processing channels:
Part Number
Description
Order
Quantity
Claim
Quantity
M1MZ-5E212-A
Right-Hand Catalytic Converter
1
1
L1MZ-6L612-B
Right-Hand Catalytic Converter Gasket
1
1
W719699-S442
Right-Hand Catalytic Converter Nuts
2
2
W721083-S439
Transmission Crossmember Bolts (PKG of 4)
1
4
W716979-S439
Rear Sub-Frame Bolts (PKG of 4)
1
2
W719413-S439
Middle Sub-Frame Bolts (PKG of 4)
1
2
W500010-S442
Right-Hand Side Grass Shield Bolt
As Required – Only if
Missing from Vehicle
W525174-S300
Skid Plate Rivets
Order your parts requirements through normal order processing channels. To guarantee the shortest
delivery time, an emergency order for parts must be placed.
Less than 3% of the affected vehicle population is expected to require replacement of a cracked righthand catalytic converter and/or right-hand and/or left-hand exhaust flexible pipe(s).
© Copyright 2021 Ford
Motor Company
ATTACHMENT II
Page 3 of 4
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Customer Satisfaction Program 21B35
Certain 2020 Model Year Explorer Police Vehicles Equipped with a 3.0L EcoBoost
Engine
Right-Hand Catalytic Converter and Right-Hand and Left-Hand Exhaust Flexible Pipe(s) Inspection
Obtain the parts below locally
Part Number
Description
Obtain Locally
300 Series Stainless Steel Bands - 5/8” Wide or Greater
Order
Quantity
Claim
Quantity
2
Claim as
Misc.
Other
DEALER PRICE
For latest prices, refer to DOES II.
PARTS RETENTION, RETURN, & SCRAPPING
Follow the provisions of the Warranty and Policy Manual, Section 1 - WARRANTY PARTS
RETENTION AND RETURN POLICIES. If a replaced part receives a scrap disposition, the part must
be scrapped in accordance with all applicable local, state and federal environmental protection and
hazardous material regulations. Federal law prohibits selling motor vehicle parts or components that
are under safety, compliance, or emissions recall.
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford
Customer Service Division in
accordance with Policy Procedure Bulletin 4000.
REPLACED FSA PARTS INSPECTION AND SIGN OFF
Effective March 1st 2021 all parts replaced as part of an FSA repair with a repair order open date of
March 1st 2021 or later must be inspected and signed off on the repair order by a member of your
dealers fixed operations management team or an employee the task has been delegated to. If the
task is to be delegated to a non-management employee, the employee needs to be someone other
than the technician who completed the repair and needs to understand the importance of completing
this task consistently and accurately.
•
All parts replaced as part of an FSA repair should be returned to the parts department
following the Warranty Parts Retention and Return Policies.
•
Inspect the replaced parts to verify the FSA repair was completed.
•
If the FSA repair is found to be complete, the designated employee signs the repair order line
or parts return stamp area (electronic or hand signed) for the FSA repair indicating the parts
were inspected and validated to have been replaced.
•
After the parts have been inspected, they should be handled based on the guidance in the
parts status report in the Online Warranty System (Hold, Return, CORE, Scrap, etc.).
•
This process is subject to review during warranty audits for FSA repairs with a repair order
open date of March 1st 2021 or later. Any eligible FSA claims requiring parts replacement,
found not to have been inspected and signed off during a warranty audit will be subject to
chargeback and consideration for enrollment into the Dealer Incomplete Recall Repair
Process.
© Copyright 2021 Ford
Motor Company
ATTACHMENT II
Page 4 of 4
NEW VEHICLE DEMONSTRATION / DELIVERY HOLD
Customer Satisfaction Program 21B35
Certain 2020 Model Year Explorer Police Vehicles Equipped with a 3.0L EcoBoost
Engine
Right-Hand Catalytic Converter and Right-Hand and Left-Hand Exhaust Flexible Pipe(s) Inspection
Note: Other approvals (electronic or handwritten) for add-on repair lines, dealer owned vehicle
repairs, and repeat repairs do not qualify as FSA parts inspection approvals. The post repair FSA
parts inspection process (electronic or handwritten) is independent from other warranty approval
requirements. The approval by the designated employee implies that the FSA parts were found to be
replaced and must be able to be clearly identified on the Repair Order. If multiple FSA’s require
approval on a single Repair Order, each applicable occurrence will require individual post repair
approval by the designated employee.
© Copyright 2021 Ford
Motor Company
ATTACHMENT III
PAGE 1 OF 10
CUSTOMER SATISFACTION PROGRAM 21B35
CERTAIN 2020 MODEL YEAR EXPLORER POLICE VEHICLES EQUIPPED WITH A
3.0L ECOBOOST
ENGINE — RIGHT-HAND CATALYTIC CONVERTER AND RIGHTHAND AND LEFT-HAND EXHAUST FLEXIBLE PIPE(S) INSPECTION
SERVICE PROCEDURE
NOTE: Photo submission is required for all components that are found to be cracked or leaking.
1. Inspect the Left Hand (LH) exhaust flexible pipe convolute for cracks or leaks. Were any cracks or leaks
found at the LH exhaust flexible pipe convolute? See Figures 1 and 2.
FAIL - Replace the LH exhaust flexible pipe. Please follow the Workshop Manual (WSM)
procedures in Section 309-00B. Then proceed to Step 2.
PASS - Proceed to Step 2.
FRONT OF
VEHICLE
LH EXHAUST FLEXIBLE
PIPE CONVOLUTE
20212A
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
- Advanced protection against the four main causes of engine...
- Delivers 40% stronger wear protection than industry...
- Provides 15% better deposit defense vs. industry standards...
- Up to 2.5X better heat protection vs. industry standards to...
- Engineered for excellent low-temperature flow, reducing...
This product presentation was made with AAWP plugin.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 21B35
Replacement Service Bulletin Number:
MFR Communication Date: 2021-11-10
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA
AutoAuth access for Chrysler
, Jeep
, Dodge
, and Fiat
(2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA
AutoAuth account is not included with the device. Users must register and pay separately through the official FCA
AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- 2026 Latest Version – Now Upgraded from 32GB to 64GB: XTOOL D7 obd2 scanner diagnostic tool with bidirectional is designed for DIY enthusiasts, professional mechanics. It now offers 64GB storage for smoother operation. Its 5000mAh battery (with 2500mAh 7.3V fast-charging) supports all-day use. With FCA
, CAN FD, and DOIP protocol support, it covers more vehicle models and newer systems. A newly added battery voltage reading shows battery status before diagnostics, helping prevent low-voltage tests that could harm the vehicle. The V2.0 Diagnostic Report allows shops to personalize results with logos, customer details, and attachments to build trust and maintain records. - Save $500+/Year with Pro-Level Diagnostics: Whether you're a DIYer, starting a repair business, or beginning work at an auto shop, XTOOL D7 car scanner offers advanced features typically found only in expensive professional OBD2 scanners - without the high price tag. With 4,000+ Active Tests & Bidirectional Pids, 36+ Special Functions, advanced module resets like SRS Reset, OE-level All-System Scan (one-click), FCA
AutoAuth, CAN FD, DoIP, data export, and 8 PIDs graphing, the D7 auto scan tool covers 100,000+ vehicles (excluding Indian
models). Includes 3-Year updates and supports the XV200 endoscope to detect em!ssions and intermittent issues. - Full Bidirectional Advantage Over Other Code Readers & Scan Tools: The XTOOL D7 automotive scanner offers true bidirectional control plus advanced bidirectional PIDs, letting you send commands to components like A/C clutches, fuel injectors, windows, fans and more, while monitoring sensor responses live to catch elusive issues (even those without warning lights). Unlike budget bidirectional obd2 scanners limited to basic active tests,the D7 car fault scanner gives you full bidirectional control to run ABS pump tests, throttle position, turn fan on/off and solenoid tests, etc. No guessing, no extra fees—just smarter diagnostics
- OE-Level Full System Car Diagnostic Scanner with 8 Live Data Graphs: The XTOOL D7 is a pro-grade diagnostic tool that gives you full access to all vehicle systems—just like Snap on scanners & the factory scan tools, it delivers deep, accurate diagnostics you can trust. Easily view live data streams, retrieve freeze frame, and run active tests to pinpoint issues fast. With the ability to graph up to 8 PIDs at once, you can spot performance trends and troubleshoot like a pro. Whether you're a mechanic or car owner, with the D7 auto scanner you can stay ahead of problems and keep your vehicle running at its best
- High-value Automotive Scanner Diagnostic Tool with 36+ Special Function, Module Resets, Relearns, Calibrations, Adaptations & Initializations: XTOOL D7 diagnostic tool packs 36+ common & advanced maintenance, skip the $150 fee for battery registration after replacement, throttle body relearn after cleaning, or TPMS resets post-rotation, Auto bleed after the pad changes, or Electronic Parking Brake. Need to reset the transmission after towing? Crank sensor relearn for GM/for Dodge
? Done. D7 also covered advanced functions like Ad~blue Reset, VIN Write, and many more professional OBD2 scanner functions that we can't list here. Text us your VIN + what you need, we’ll check the compatibility
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
This product presentation was made with AAWP plugin.
Last update on 2026-06-08 / Affiliate links / Images from Amazon Product Advertising API




