NHTSA ID Number: 10204013
Manufacturer Communication Number: KC-193
TSB/Document Date: 2021-12-07
Summary
Mack
Chassis - Particulate Matter (PM) Sensor Diagnostic Trouble Codes (DTC) Illuminating The Malfunction Indicator Lamp (MIL); Tech Tip TT-014-2016 - US14+OBD16, US17+OBD16 And Newer Emissions, Common Model Year 2017 And Newer - To Be Used For EVERY
11/30/21, 1:15 PM
Article
Mack Chassis - Particulate Matter (PM) Sensor
Diagnostic Trouble Codes (DTC) Illuminating The
Malfunction Indicator Lamp (MIL); Tech Tip TT-0142016 - US14+OBD16, US17+OBD16 And Newer
Emissions, Common Model Year 2017 And Newer
- To Be Used For EVERY
Internal Content
This Solution is relevant regardless of previous visits
and sensor replacements. At this time, multiple
sensor failures are not uncommon, regardless of
how new the sensor is. The same procedure should
be followed for every instance.
PLEASE NOTE: Instructions have been updated as of
20 June 2019. If diagnostics indicate that sensor
replacement is required, please follow FSB 284 - 068
Exhaust Particulate Sensor, Repair ( 2016 ) or FSB 284
- 069 ( 2017 ) Exhaust Particulate Sensor, Repair. An
eService case is not required
Precautions
1. The PM sensor is a smart sensor (12V supply and CAN lines) with
an orientation tab as seen below:
; Live UI
Nm +/ 5 Nm
Installation torque of 50
1/5
11/30/21, 1:15 PM
Nm +/- 5 Nm
Article
2. PM sensors need to be handled carefully. Dropping them most
likely results in permanent damage to the sensor. Keep cap on the
sensor until ready to install the sensor to avoid any contamination.
3. NEVER (DO NOT) apply anti-seize to install the PM sensor. If for
some reason someone applied it before this repair, thoroughly clean
the threads and sealing surfaces while replacing the sensor.
4. A removed PM sensor should be capped immediately (cap from
replacement sensor) and packaged carefully, if returning to warranty
or investigation purposes.
Repair
IMPORTANT:
• If a chassis arrives with a derate warning active, the PM sensor
is not the source of the derate and there is a separate existing
issue.
• Prior to installing a new sensor for any of the steps below,
gently shake the sensor and ensure it does not rattle. If noise is
heard, another sensor should be used.
1. Verify the chassis emissions level
- Details can be found in the Product Details box on the Product
tab in PTT as seen below:
• For US17+OBD16 (Common Rail Fuel System) Chassis setting
DTCs P24DA or P1031 ONLY:
; Live UI
- Software improvements have been released to address this code.
https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD7?pyActivity=%40basec…
2/5
11/30/21, 1:15 PM
So t a e p o e e ts a e bee
Refer to CBR Solution CBR-274.
Article
e eased to add ess t s code.
• For US17+OBD16 Chassis setting any other codes for the PM
Sensor, Proceed with instructions below.
• For US14+OBD16 (Commonly 2017 model year): Proceed with
instructions below.
2. Check the DTC Status
Only troubleshoot PM sensor faults if the fault is Active or
Confirmed as shown below.
3. Follow the set of instructions for the relevant DTC(s):
• P1033, P1034, P24D0 or U02A3 fault codes (Confirmed or Active)
- These PM sensor fault codes require connections and wiring
harness checks for power supply and CAN communications. Repair
can be verified with just KEY ON as diagnostics run immediately.
- If wiring harness and connections check isolates the problem
to the sensor:
1. Remove the sensor from the exhaust.
2. Obtain a new sensor. Gently shake the new sensor to ensure
it does not rattle.
NOTE: A sensor that rattles should not be installed.
3. Install the new sensor.
4. Clear the DTCs and release the vehicle.
1. Replace the PM sensor with the latest part. Gently shake the
new sensor to ensure it does not rattle.
NOTE: A sensor that rattles should not be installed.
2. Update the Engine Control Module (EMS) software and
clear all codes.
3. Release the vehicle.
If the PM sensor is the current part number:
; Live- UI
https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/app/VolvoKM_/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD7?pyActivity=%40basec…
3/5
11/30/21, 1:15 PM
Article
1. Verify that the EMS software is current.
2. Remove the sensor from the exhaust.
3. Obtain a new sensor. Gently shake the new sensor to ensure
it does not rattle.
NOTE: A sensor that rattles should not be installed.
4. Install the new sensor.
5. Clear the DTCs and release the vehicle.
• All other PM sensor fault codes (Confirmed or Active)
P24B3, P24AF, P2AB0, P24B1, P24B0, P24DA, P24B7, P24B5, P24D1,
P24FC, P24AE, P24B4, and P1032. (Highlighted are common faults).
1. Verify that the EMS software is current.
2. Remove the sensor from the exhaust.
3. Obtain a new sensor. Gently shake the new sensor to ensure it
does not rattle.
NOTE: A sensor that rattles should not be installed.
4. Install the new sensor.
5. Clear the DTCs and release the vehicle.
Tags
k59554255
;
p1031
p1032-00
p1033-00
p1034-00
p249c-00
p24ae-13
p24af-00
p24b0-00
p24b1-00
p24b3-13
p24b4-92
p24b5-00
p24b7-00
p24d0-00
p24d1-00
Live UI
p24da-00
p24fc-00
p2ab0-47
p103200
4/5
11/30/21, 1:15 PM
Article
p103300
p103400
p249c00
p24ae13
p24af00
p24b000
p24b100
p24b313
p24b492
p24b500
p24b700
p24d000
p24d100
p24da00
p24fc00
Related links and attachments
No links or attachments available
p2ab047
Feedback
Give feedback
to help improve the content of this article
5/5
- 🔥🔥🔥2026 New Functions Making X7HD the Top Dog - Big...
- 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more...
- 🚛Advanced ECU Coding & Programming - ANCEL X7HD 10.1inch...
- 🚛42+ Reset Functions & Bidirectional Control...
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD...
- Dealer-Level Diagnostics, Faster & Easier: The heavy duty...
- One Tool for 50+ Truck Brands: The diesel scanner supports...
- Diesel Truck DPF Regen & Reset Features: Experiencing loss...
- 7+ Resets - Perform Essential Procedures: The truck scanner...
- Full System Diagnostic for Truck: The truck scanner...
This product presentation was made with AAWP plugin.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: KC-193
Replacement Service Bulletin Number:
MFR Communication Date: 2021-11-04
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- OBD2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15+ reset service, bidirectional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth OBD2 scanner diagnostic tool ideal for DIY's and private car owners.
- Bidirectional Test for Quickly Locating Problems: The Bidirectional Scan tool allows you to send commands directly from your smartphone to your vehicle for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping DIY users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
- 15+ Maintenance Resets: The current version introduces 15+ popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us check compatibility.
- Wide Compatibility CANFD & FCA
Autoauth: Compatible with GM, Ford, Toyota, Chrysler, Honda, Mazda, Nissan, Mitsubishi, Hyundai, KIA with standard OBD2 port from 1996 to newer. More than 100+ car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us to confirm compatibility before purchase. - Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent Auto VIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time data. Data logging/reporting is available for playback and further analysis
- No Annual Fees & 2026 Upgraded CAN FD: Why pay $199/year or more for updates? The 2026 newest Kingbolen K7 obd2 scanner features have been upgraded to Lifetime Updates without subscription fees, saving you significant costs in the long run. K7 scan tool also adds the CAN FD protocol for the latest GM models (2019+), enabling faster data transfer, reducing the risk of undetected errors
- 2026 Newest Top-tier Car Scanner: Kingbolen K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Test, ECU Online/Offline Code, 31+ Resets, PMI for Ford, Lincoln, Mazda, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA AutoAuth
- OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with Auto Vin can do one-click to scan ECUs on most of vehicles, like pcm, ecm, eps, bcm, tpms, sas, a/c system... to read/clear code, view live data, freeze frame, read ecu info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
- Bidirectional Test/Active Test & ECU Code: Stop guessing and start fixing. Bidirectional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to save money and time on car repairs when performing complex maintenance and repair
- 31 Reset Functions: Avoid expensive dealership visits for simple services. Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional diagnostic scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Code, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. Note: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase
- 【Cost-effective Diagnostic Scan Tool】Lifetime updates without fee, No subscription fee required, No IP restrictions, Ediag Elite bluetooth scanner stands out. It can perform in-depth Full System diagnostics,15+ Reset Services, powerful Active Test, CANFD & FCA AutoAuth. Connect your phone via Bluetooth for diagnosis, providing a faster, smarter and smoother diagnostic experience. Easy to put in pocket, convenient to carry, keep track of the car's status anytime, anywhere. Best bang for your bucks.
- 【15+ Reset Service, Easy Problem Solving】 KINGBOLEN Ediag Elite obd2 scanner diagnostic scan tool comes with 15+ professional reset functions, including: Oil Reset, ABS Bleeding, Injector Code, SAS Reset, TPMS Reset, BMS Reset, AFS Reset, Sunroof Calibration, Brake Reset and more special functions in system diagnose menu. The ideal bluetooth scanner for mechanics and DIY enthusiasts, which can save unnecessary maintenance costs and significantly shorten repair time.
- 【Comprehensive Full Systems Diagnostic】 The Ediag Elite obd2 scanner bluetooth supports full system In-Depth diagnosis. It can read/clear fault codes, read real-time data/freeze frame, module information, and perform testing and reset functions for ECM, BCM, ABS, SRS, TPMS, TCM, BMS, SAS, A/C & RTM systems ect. It works with most car models after 1996, cover more than 150+ car brands. Supports 22 global languages for your convenience(EN, FR, ES, DE, IT, RU, PT, JP, TU...)
- 【Powerful Bidirectional Scan Tool & Active Test】 The obd2 code reader for Ediag Elite can perform real time active test that can send commands to the vehicle’s ECU to drive the actuators to work, such as turn on the radiator fan, modulate the throttle, open/close windows, etc. It can help you quickly find out the bad components and the cause of the fault, which can save you a lot of time. With BT 5.2 wireless connectivity, you can enjoy wireless diagnostics up to 33 feet.
- 【FCA AutoAuth & CANFD Compatibility】 Ediag Elite scan tool offers support with FCA Gateway Access, allowing you to perform protected functions on FCA vehicles, including Chrysler, Dodge, Jeep, Alfa Romeo, Fiat vehicles, etc.(Note:just allows you to access the FCA, but need to have your own FCA account) Supports the CAN-FD protocol, provide high-speed vehicle diagnostic communication and data transfer, working perfectly on GM vehicles produced after 2020, saving $100 to buy a CAN FD adapter.
This product presentation was made with AAWP plugin.
Last update on 2026-06-05 / Affiliate links / Images from Amazon Product Advertising API