NHTSA ID Number: 10203897
Manufacturer Communication Number: WRG-21
TSB/Document Date: 2021-12-03
Summary
Subaru
of America, Inc. (Subaru) is initiating a new safety recall for certain 2019-2020 MY Ascent, 2018-2019 MY BRZ, 2018 MY Forester (Turbo), 2018-2020 MY Impreza, 2018-2020 MY Legacy, 2018-2020 MY Outback, and 2018-2019 MY WRX vehicles in which the fuel pump may become inoperative.
ATTENTION:
GENERAL MANAGER
q
PARTS MANAGER
q
CLAIMS PERSONNEL
q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
q
© 2021 Subaru of America, Inc. All rights reserved.
PRODUCT CAMPAIGN BULLETIN
APPLICABILITY:
2018-2019MY Legacy and Outback 2.5L and 3.6L NUMBER: WRG-21R
2020MY Legacy and Outback 2.5L and 2.4L (Turbo)
DATE: 08/24/21
2018-2020MY Impreza
REVISED: 11/10/21
2019-2020MY Ascent
NHTSA ID : 21V587
2018MY Forester (Turbo)
2018-2019MY WRX
2018-2019MY BRZ
SUBJECT:
Fuel Pump Impeller Failure
INTRODUCTION:
Subaru of America, Inc. (Subaru) is initiating a new safety recall for certain 2019-2020 MY Ascent,
2018-2019 MY BRZ, 2018 MY Forester (Turbo), 2018-2020 MY Impreza, 2018-2020 MY Legacy,
2018-2020 MY Outback, and 2018-2019 MY WRX vehicles in which the fuel pump may become
inoperative.
AFFECTED VEHICLES:
A total of 172,308 U.S. vehicles will be affected by this recall, as listed below:
Model Year
Carline
Production Date Range
Affected vehicle count
2019-2020
Ascent
January 14, 2019 – May 20, 2019
22,831
2018-2019
BRZ
April 6, 2018 – November 6, 2018
2,409
2018
Forester (turbo)
April 20, 2018 – August 7, 2018
2,010
2018-2020
Impreza
May 3, 2018 – May 31, 2019
28,105
2018-2020
Legacy
June 25, 2018 – October 18, 2019
17,487
2018-2020
Outback
June 25, 2018 – October 18, 2019
88,860
2018-2019
WRX
April 20, 2018 – November 1, 2018
10,606
Not all vehicles in the production ranges listed above are affected by this recall. Coverage must
be confirmed by using the Vehicle Coverage Inquiry function on subarunet.com prior to repair. In
addition to the Vehicle Coverage Inquiry lookup function by VIN, retailers may view and download
their affected VIN list from subarunet.com/Recalls & Campaigns/Recall Affected VIN List.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 1 of 72
DESCRIPTION OF THE DEFECT AND SAFETY RISK:
The affected vehicles may be equipped with a low pressure fuel pump produced during a specific
timeframe that may include an impeller which has been manufactured with a lower density. Under
certain conditions, the lower density fuel pump impeller may deform and interfere with the body of
the fuel pump, potentially causing the low pressure fuel pump to become inoperative.
If the low pressure fuel pump becomes inoperative, the check engine warning light or malfunction
indicator light may illuminate, and/or the engine may run rough. In the worst case, an inoperative
fuel pump may result in the engine stalling without the ability to restart the vehicle, increasing the
risk of a crash.
RETAILER RESPONSIBILITY:
Please be advised that it is a violation of Federal law for a dealer to deliver a new motor
vehicle covered by a recall under a sale or lease until the defect is remedied. Therefore, any
Authorized Subaru Retailer failing to perform the applicable service procedures to correct all
affected vehicles in their inventory prior to the vehicle being placed in service may be subject
to civil penalties of up to $21,000 per violation (i.e., for each vehicle), as provided in 49 CFR
§578.6 and will also be in breach of the Subaru Dealer Agreement.
Any vehicles listed in any recall/campaign that are in retailer stock must be:
•
Immediately identified.
•
Tagged or otherwise marked to prevent their delivery or use prior to repair.
•
Repaired in accordance with the repair procedures outlined in the Product Campaign Bulletin
Retailers are to promptly follow the applicable service procedures, to correct all affected vehicles in
their inventory (used, demo & SSLP). Additionally, whenever a vehicle subject to this recall is taken
into retailer inventory necessary steps should be taken to ensure the recall correction has been made
before selling or releasing the vehicle.
OWNER NOTIFICATION:
Owner Notification
Subaru notified all affected vehicle owners of this recall by first class mail on September 27, 2021.
Owners of the affected 2020 model year turbo Legacy and Outback vehicles were advised that parts
were not available yet. On October 25, 2021, owners of the affected 2020 model year turbo Legacy
and Outback vehicles will be re-notified by first class mail, advising them that sufficient parts
inventory is now available and to schedule an appointment to have this recall repair completed.
Copies of the owner notification letters for this recall are included at the end of this bulletin.
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 2 of 72
PARTS INFORMATION:
The parts required to perform these repairs have been assembled into Fuel Pump Kits, numbered for
each model and labeled accordingly as shown below to help insure installation of the proper kit into
the applicable model.
Description
WRD-20 / WRG-21
Fuel Pump Kit
Kit Part Number
Model Year
Model Application
X4202AL000
18-19
Legacy / Outback 2.5L
X4202AL010
18-19
Legacy / Outback 3.6L
X4202XC220
20
Legacy / Outback 2.4L
X4202AN110
20
Legacy / Outback 2.5L
X4202FL000
18-20
Impreza
X4202XC000
19-20
Ascent
X4202CA330
18-19
BRZ
18
Forester (Turbo)
18-19
WRX
X4202SG660
Sufficient remedy parts supply is expected to be available prior to owner notification. Once available,
the remedy parts must be ordered through PRIME. Please refer to “Recalls & Campaigns/PRIME
Max Quantities” on Subarunet for the orderable quantities.
NOTE: X4202XC220 & X4202CA330 kits continue to be ordered through PRIME, although the
parts are placed on hold and restricted from Partseye suggestions. The PIC team will release the order
when contacted and provided with the valid VIN and order number.
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 3 of 72
The information below provides component part content breakdown of the fuel pump kits:
Kit Number X4202CA330 continues to be ordered through PRIME, although the part are placed on
hold and restricted form Patseye suggestions. the PIC team will release the order when contacted and
provided with the valid VIN and order number.
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 4 of 72
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 5 of 72
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 6 of 72
NOTE: Kit Number X4202XC220 continues to be ordered through PRIME, although the part are
placed on hold and restricted form Patseye suggestions. the PIC team will release the order when
contacted and provided with the valid VIN and order number.
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 7 of 72
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 8 of 72
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 9 of 72
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 10 of 72
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 11 of 72
ADDITIONAL REQUIRED MATERIALS / SPECIAL TOOLS:
•
42099FL030 Fuel Pipe Adapter: Connects directly to the
fuel pump outlet pipe at the fuel tank. Remove & discard the
temporary plug before use. NOTE: Retailers were automatically
shipped 2 of these adapters at no charge for use with the original
WRD-20R campaign.
•
42099CA010 (for Forester, WRX, BRZ, and 18-19
Legacy / Outback) and 42099FL020 (for Ascent,
Impreza, and 20 Legacy / Outback) Fuel Tank Caps:
To be put back into the fuel pump opening in the fuel
tank after pump removal. These caps will help contain
fuel odors and prevent contamination from entering
the tank while the pump assembly is removed.
•
42099FL000 Ring Nut Wrench: Used to remove and install
the fuel pump assembly locking rings on Ascent, Impreza, and 20MY
Legacy/Outback. This is already a required essential Subaru Special
Service Tool.
•
42099CA000 BRZ Ring Nut Wrench: Used to remove and install the
fuel pump assembly locking rings on BRZ models. This is already a
required essential Subaru Special Service Tool.
•
Redline Detection Smoke Pro (RDL-95-0051). Used for leak
testing the fuel tank chamber and fuel pump assembly. This is
already a required essential Subaru Special Service Tool.
IMPORTANT: A length of door edge guard, flexible tubing or heavy duty electrical tape to apply
around the fuel pump access opening to avoid cuts / abrasions from sharp edges is required for all
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 12 of 72
fuel pump replacement repairs.
SERVICE PROCEDURES / TABLE OF CONTENTS:
Carline
Begins on Page
Legacy / Outback 2.5L & 3.6L
16
Legacy / Outback 2.4L & 2.5L
38
Impreza, Ascent, Legacy /
Outback 2.4L & 2.5L TIPS
25
BRZ TIPS
50
Forester XT Turbo
16
WRX
16
Impreza
29
Ascent
38
Service Procedure Information for ALL MODELS:
NOTES:
•
The following information is intended to SUPPLEMENT
the following and Service Manual procedures.
•
Two new videos have been linked below to provide
additional information regarding:
1) Installation of the new fuel pump component into the
filter housing
2) Hints for getting the new retaining Ring Nut threads
properly engaged onto the fuel tank threads.
•
These video links are included in APPENDIX A on pg.
57 and APPENDIX B on pg. 60 along with additional
information.
VERY IMPORTANT: To avoid gasoline spillage, THIS PROCEDURE MUST BE
PERFORMED WHEN THE FUEL LEVEL IN THE TANK IS AT OR BELOW 2/3 FULL. If
over 2/3 full, the tank will need to be drained to 2/3 or less before attempting to remove the complete
fuel pump assembly.
ALWAYS follow ALL the CAUTIONS and procedures for safely releasing fuel pressure and
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 13 of 72
draining fuel from the fuel tank as supplied in the applicable Service Manual.
ALWAYS remove the fuel filler cap to release any accumulated vapor pressure as a first step.
If draining fuel from the fuel tank is necessary, follow the applicable procedure this bulletin along
with “USING THE SELECT MONITOR” procedure in the applicable Service Manual.
When removing the rear seat cushion (all
models except Ascent & BRZ), if the plastic
retaining clips (a) (p.n. 64396KA010 for
18-19 Legacy / Outback and 64333FJ000
for Impreza, WRX, Forester, and 20 Legacy /
Outback) in the floor come out, they become
one-time use items and MUST be replaced
during reassembly. When installing the seat
cushion, always confirm the seat belt buckles
are returned to the proper positions.
When removing the fuel pump access cover, there is a foam seal between the cover and the vehicle
body (except BRZ). Use CAUTION when removing the cover to not damage the foam seal. If found
to be or if it becomes damaged, the replacement seal part numbers are: 96077AJ00A for Legacy /
Outback and 96077FL00A for Impreza and Ascent.
It cannot be stressed enough to have plenty of clean shop cloths and /
or absorbent pads available to use when removing the fuel line(s) from
the fuel pump. A small drip tray or pan is also recommended to use for
catching any dripping fuel when removing the fuel pump assembly from
the tank.
IMPORTANT: When performing these procedures, shop cloths
contaminated with gasoline will be created. It is CRITICAL they be
handled safely and following proper disposal guidelines. Always store
contaminated shop cloths in an approved safety can as shown here.
After removing the rear seat cushion assembly and the
(main) fuel pump access cover, use a length of small
hose (sliced lengthwise), vinyl door edge guard as
shown here or electrical tape to cover the edge of the
access opening in the floor panel. This will protect any
removed fuel line(s) and Technician hands from cuts
or abrasions resulting from sharp edges. The photo
here shows the power harness unplugged and shop
cloths in place to absorb residual fuel that may remain
in the lines after removal from the pump assembly.
CAREFULLY release the retaining clip(s) with a
small flat-blade screwdriver, put a cloth over the connection and remove the line(s). Immediately
install the plug(s) provided in the replacement fuel pump kits into the removed line(s) to avoid any
spillage. This will help reduce the chances of post-repair customer concerns of fuel odor inside the
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 14 of 72
cabin.
On WRX, Forester, and 18-19 Legacy / Outback models, use a small container or magnetic dish to
keep all the retaining ring nuts together while the pump assembly is removed.
Have a small fuel-safe drain pan in place to catch any spilled fuel as the pump assembly is
CAREFULLY lifted out of the fuel tank. If available, use a vacuum bleeder with a collection
reservoir and hose to draw some of the stored fuel out of the fuel chamber surrounding the pump and
filter to help avoid spillage. NOTE: On Ascent, there is a jet pump fuel tube attached to the lower
portion of the fuel pump assembly as shown below, right which must also be removed before the
pump assembly can be completely removed from the vehicle. Release the retaining clip with a small
flat-blade screwdriver and remove the line but, secure the line with electrical tape or Mechanic’s wire
to keep it from falling into the tank once it is removed. If not secured, it will fall into the tank and
have to be “fished” out prior to reinstalling the pump assembly.
IMPORTANT: After the pump assembly is removed, ALWAYS install the applicable fuel tank
cap (plug) as shown below or, cover the fuel tank opening with shop cloths or a fender cover (or an
equivalent) to keep fuel odors from accumulating inside the cabin. These tools are not required
when replacing the complete fuel pump assembly due to the very short time the tank will be open to
complete the repair.
NOTE: When searching STIS for the applicable
Service Manual procedures for reference, select Fuel
Filter REMOVAL to get the detailed procedure for
separating the pump / filter sock assembly from the
complete fuel pump assembly. Fuel Filter removal
is NOT required to complete this procedure. The
replacement pumps come with a new filter sock
already in place as shown here.
Continued...
Bulletin Number: WRG-21R; Revised: 11/10/21
Page 15 of 72
For this recall, the 2-wire (Blue / Black) fuel pump wiring harness
indicated as 1-time use in the Service Manual is reused but, should be
inspected for damage or any evidence of overheating (discoloration
of connectors, etc.). IMPORTANT: If any damage e.g. distorted
or melting plastic connectors, overheated wiring or terminals is
identified, the harness MUST be replaced. It easily unplugs from the
fuel pump.
When reinstalling the thinner (Black / Red) fuel sender wires into the 2
retaining clips, they go into the clips first and are held in place by the
thicker fuel pump harness wires.
FUEL PUMP REPLACEMENT for 18-19 LEGACY and OUTBACK 2.5 and 3.6L, WRX, &
FORESTER XT Turbo Models:
IMPORTANT PRECAUTIONS:
•
Place “NO OPEN FLAMES” signs near the working area.
•
Be careful not to spill any fuel, especially when working inside the vehicle.
•
Catch any leaking fuel from the removed fuel tube(s) using a small drain pan or cloths.
•
If the fuel level in the tank is 2/3 full or more, drain the fuel to below 2/3 full before starting
- Restores fuel economy
- Stabilizes ethanol
- Maximizes horsepower
- Improves responsiveness
- For use in both gasoline and diesel engines
- DESIGNED TO EXCEED EXPECTATIONS: Red Line complete SI-1 fuel...
- PERFORM AND PROTECT: Fuel additive cleans injectors...
- EFFICIENT FUEL BURN: Gas treatment that enhances gasoline...
- EASY TO USE: Use one bottle per tank for most effective...
- 15 Ounce (2 Pack)
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: WRG-21
Replacement Service Bulletin Number:
MFR Communication Date: 2021-11-10
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: FUEL SYSTEM, GASOLINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs.
- 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 2026 Newest Wireless Bluetooth Scan Tool D1: OTOFIX D1 Diagnostic scanner is upgraded version with Enhanced Hardwares & Newest Functions, FASTER and SMARTER! ✅Alternative Bluetooth 5.0 +USB connect✅2G+64GB✅Android 9.0 OS✅5G & 2.4 GHz Dual WiFi✅5800mAh battery👍VAG Guided Function👍ECU Online Coding👍CANFD&DOIP👍40+ Services👍Bi-Directional Control👍Full Systems Diagnose👍2 Years Free Update👍150+ Vehicle Coverage🎁Contact to get gift: otofixaftersales-amz@ outlook.com
- ECU Coding to Unlock the Hidden Features: OTOFIX D1 obd2 scanner diagnostic tool newly adds ECU Coding which can Online Coding(ONLY for VW/Au.di/Sk0da), Variant Coding/Offline Programming, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, disbale auto start-stop, sunroof initialization, injector calibration, etc. PS: Coding functions vary by model&year.
- Full Bidirectional Control for Active Car Tests: The D1 OTOFIX scanner also offers bi-directional control, allowing you to perform powerful active tests on car subsystems. This means that you can check the working status and functionality of open & close solenoids, energize injectors, turn cooling fan on & off, and more, all from the device itself.🚩The D1 bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.**Note that Active Tests available depend on the make/model/year of your car.
- 40+ Popular Maintenance Functions: OTOFIX D1 obd scanner for car performs 40+ hot services, including Oil Reset, EPB, TPMS, BMS, E.GR, G.PF, D.PF, SAS Calibration, ABS Bleeding, Injector Coding, Gearbox Match, Suspension, Crankshaft Relearn, Power Balance, etc., still growing. Great choice for DIYers, technician, repair shop. 🚩Get MORE special functions from "Car Brand>System>Service". Check compatibility before purchase via 📧 otofixaftersales-amz@ outlook.com.
- OE-Level All Systems Diagnostic + One-Click AutoVIN & AutoSCAN: OTOFIX D1 scanner automotriz gives you the ability to troubleshoot entire car systems including engion system,transmission system,body system,chassis,etc. 🚩One of the standout features of the D1 obd2 scanner diagnostic tool is the one-click AutoVIN & AutoScan function. This feature allows you to quickly and easily scan all diagnosable ECUs with just one click, and identify any problems hidden in your vehicle's systems.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.