NHTSA ID Number: 10203549
Manufacturer Communication Number: T-SB-0089-21
TSB/Document Date: 2021-11-15
Summary
TSB: Some 2020 model year Camry, Camry Hybrid
, Corolla Hatchback, RAV4, and RAV4 Hybrid vehicles may exhibit one or more of the following conditions: ?Diagnostic Trouble Code (DTC) B15A804 is present in current or history. ?Red SOS LED stays on after bulb check. ?Toyota App does not accept the activation code. ?Toyota App is inoperative. ?SOS call center does not receive the vehicle?s location in a timely manner. ?Toyota App shows an error 42 when trying to execute a command. ?Unable to remote start the vehicle with the key fob (if equipped). ?Unable to subscribe to remote services. ?Unable to activate Wi-Fi. ?Destination Assist is inoperative. Some 2020 ? 2021 model year Camry, Camry Hybrid, Corolla Hatchback, RAV4, and RAV4 Hybrid vehicles and some 2021 model year Avalon, Avalon Hybrid, Corolla, Corolla Hybrid, Sienna Hybrid, and Venza Hybrid vehicles may exhibit one or more of the following conditions: ?DTC B15A804 is present in current or history. ?Red SOS LED stays on after bulb check. ?Toyota App is inoperative. ?Unable to subscribe to remote services. ?Unable to activate Wi-Fi. ?Depleted 12V vehicle battery when in IG-OFF. ?Unable to reconnect out of network. A DCM reset and firmware update is now available to address these conditions. Follow the DCM Reset and Firmware Update Procedure in this bulletin to update the firmware.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: T-SB-0089-21
Replacement Service Bulletin Number:
MFR Communication Date: 2021-10-14
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:ELECTRICAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
T-SB-0089-21
October 14, 2021
DCM Reset and Firmware Update (LG)
Service
Category
Audio/Visual/Telematics
Section
Cellular Communication
Market USA
Applicability
YEAR(S)
MODEL(S)
2021
Avalon, Avalon HV, Corolla,
Corolla HV, Sienna HV,
Venza HV
2020 - 2021
Camry, Camry HV, Corolla
Hatchback, RAV4, RAV4 HV
ADDITIONAL INFORMATION
SUPERSESSION NOTICE
The information contained in this bulletin supersedes Service Bulletin No. T-SB-0095-20.
The Introduction and DCM Reset and Firmware Update Procedure sections have been modified.
Service Bulletin No. T-SB-0095-20 is obsolete and any printed versions should be discarded.
© 2021 Toyota Motor Sales, USA
Page 1 of 9
T-SB-0089-21
October 14, 2021
Page 2 of 9
DCM Reset and Firmware Update (LG)
Introduction
Some 2020 model year Camry, Camry Hybrid, Corolla Hatchback, RAV4, and RAV4 Hybrid
vehicles may exhibit one or more of the following conditions:
Diagnostic Trouble Code (DTC) B15A804 is present in current or history.
Red SOS LED stays on after bulb check.
Toyota App does not accept the activation code.
Toyota App is inoperative.
SOS call center does not receive the vehicle’s location in a timely manner.
Toyota App shows an error 42 when trying to execute a command.
Unable to remote start the vehicle with the key fob (if equipped).
Unable to subscribe to remote services.
Unable to activate Wi-Fi.
Destination Assist is inoperative.
Some 2020 – 2021 model year Camry, Camry Hybrid, Corolla Hatchback, RAV4, and RAV4
Hybrid vehicles and some 2021 model year Avalon, Avalon Hybrid, Corolla, Corolla Hybrid,
Sienna Hybrid, and Venza Hybrid vehicles may exhibit one or more of the following conditions:
DTC B15A804 is present in current or history.
Red SOS LED stays on after bulb check.
Toyota App is inoperative.
Unable to subscribe to remote services.
Unable to activate Wi-Fi.
Depleted 12V vehicle battery when in IG-OFF.
Unable to reconnect out of network.
A DCM reset and firmware update is now available to address these conditions. Follow the DCM
Reset and Firmware Update Procedure in this bulletin to update the firmware.
© 2021 Toyota Motor Sales, USA
T-SB-0089-21
October 14, 2021
Page 3 of 9
DCM Reset and Firmware Update (LG)
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
EL1934
DCM Reset and Firmware Update
0.8
86741-#####*
87
74
*Warranty claim MUST be submitted with the correct 10-digit OFP. Choose the correct OFP for the vehicle being repaired
by searching for the parts in the Electronic Parts Catalog using the VIN filter.
APPLICABLE WARRANTY
This repair is covered under the Toyota Basic Warranty. This warranty is in effect for
36 months or 36,000 miles, whichever occurs first, from the vehicle’s in-service date.
Warranty application is limited to occurrence of the specified condition described in
this bulletin.
Required Tools & Equipment
REQUIRED EQUIPMENT
SUPPLIER
Techstream ADVI*
PART NUMBER
QTY
TSADVUNIT
Techstream 2.0
TS2UNIT
ADE
1
Techstream Lite
TSLITEPDLR01
Techstream Lite (Green Cable)
TSLP2DLR01
*Essential SST.
NOTE
Only ONE of the Techstream units listed above is required.
Software version 16.20.027 or later is required.
Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE)
at 1-800-368-6787.
Use Techstream or an approved J2534 interface to perform flash reprogramming updates.
Visit techinfo.toyota.com for more information regarding J2534 reprogramming.
SPECIAL SERVICE TOOLS (SST)
PART NUMBER
QTY
Battery Diagnostic Tool*
DCA-8000P_T
1
*Essential SST.
NOTE
Additional SSTs may be ordered by calling 1-800-933-8335.
© 2021 Toyota Motor Sales, USA
T-SB-0089-21
October 14, 2021
Page 4 of 9
DCM Reset and Firmware Update (LG)
DCM Reset and Firmware Update Procedure
1. Move the vehicle to an area with good DCM (Data Communication Module) signal reception.
NOTE
Ensure the customer has an active account BEFORE beginning this process.
If the customer has waived telematics services, an account may need to be temporarily created
to perform this update.
2. Using Techstream, perform a Health
Check and clear ALL DTCs.
Figure 1.
A. Check the “Perform Health Check on
all ECUs” box.
B. Check the “Store only DTC
and FFD” box.
C. Click on Next.
© 2021 Toyota Motor Sales, USA
T-SB-0089-21
October 14, 2021
Page 5 of 9
DCM Reset and Firmware Update (LG)
DCM Reset and Firmware Update Procedure (continued)
3. Verify the current firmware version.
Refer to TIS – Body Electrical – Telematics – Data List:
Table 1: Current Firmware Version.
PREVIOUS
CURRENT
SOFTWARE VERSION HIGH
LG-N010dd7
LG-N010ee9
LG-N010ffB
LG-N010gg7
LG-N010hh9
LG-N010ii4
SOFTWARE VERSION LOW
575-57
575-55
I9I-13
I9I-b9
I9I-24
CBC-34
CBC-98
G7G-05
G7G-c7
797-43
797-89
646-44
646-88
Is the firmware version up to date?
YES — This bulletin does NOT apply. Continue diagnosis using the applicable
Repair Manual.
NO — Continue to step 4.
4. Disconnect the battery to reset the DCM.
5. Reconnect the battery AFTER it has been disconnected for AT LEAST 30 minutes.
6. Cycle the ignition to the IG-ON position IMMEDIATELY.
7. Verify the SOS LED indicator status.
Has the SOS LED indicator been on solid green for more than five seconds?
YES — Continue to step 8.
NO — This bulletin does NOT apply. Continue diagnosis using the applicable
Repair Manual.
8. Perform the DCM firmware update utility.
Refer to TIS – Body Electrical –
Telematics – Utility.
Figure 2.
© 2021 Toyota Motor Sales, USA
T-SB-0089-21
October 14, 2021
DCM Reset and Firmware Update (LG)
DCM Reset and Firmware Update Procedure (continued)
9. Click on Next when the DCM firmware
update screen appears.
10. Select “Start the firmware update” and click
on Next when the item selection
screen appears.
Figure 3.
Figure 4.
© 2021 Toyota Motor Sales, USA
Page 6 of 9
T-SB-0089-21
October 14, 2021
DCM Reset and Firmware Update (LG)
DCM Reset and Firmware Update Procedure (continued)
11. Click on Next when the current software
part number screen appears.
Figure 5.
NOTE
If the screen in Figure 5 does NOT appear
and an error message displays, begin the
Firmware Update Procedure again from
step 4. The battery reset MUST be
performed again.
Use the battery diagnostic tool to maintain
battery voltage.
NOTE
The battery diagnostic tool MUST be used
in Power Supply Mode to maintain battery
voltage at 13.5V while flash reprogramming
the vehicle.
For details on how to use the battery
diagnostic station, refer to the
DCA-8000 Instruction Manual located at
TIS – Diagnostics – Tools & Equipment –
Battery Diagnostics.
12. The firmware update will begin. Do NOT
turn the vehicle OFF during this time.
Figure 6.
NOTE
Do NOT press Exit until the update process
has completed.
During the update process, the green and
red LEDs will both be ON and will reset
several times resulting in the LEDs being
temporarily OFF during the process. The
download process will take about
5 – 10 minutes.
© 2021 Toyota Motor Sales, USA
Page 7 of 9
T-SB-0089-21
October 14, 2021
Page 8 of 9
DCM Reset and Firmware Update (LG)
DCM Reset and Firmware Update Procedure (continued)
13. The green LED will be ON when the
update process has completed. AFTER
the process has completed, wait for the
radio screen to display the service mode
screen BEFORE you click OK to exit.
Figure 7.
14. Verify the current firmware version.
Refer to TIS – Body Electrical – Telematics – Data List:
Table 2: Current Firmware Version
CURRENT FIRMWARE VERSION
SOFTWARE VERSION HIGH
LG-N010ii4
SOFTWARE VERSION LOW
646-44
646-88
15. Using Techstream, perform a Health Check and clear ALL DTCs that may have occurred
during the update process.
16. In the customer’s Toyota app, perform
steps 17 – 19 for customers with the
“Unable to Activate Remote” message.
Figure 8.
© 2021 Toyota Motor Sales, USA
T-SB-0089-21
October 14, 2021
DCM Reset and Firmware Update (LG)
DCM Reset and Firmware Update Procedure (continued)
17. Click on the arrow by the vehicle
name/nickname.
Figure 9.
18. Click on Remove.
Figure 10.
19. Click on Add Vehicle to perform
the enrollment again.
Figure 11.
© 2021 Toyota Motor Sales, USA
Page 9 of 9
- WHY CHOOSE THE 2025 CR MAX -Upgrade the latest diagnostic capabilities for all vehicles after 1996: upgrade to 49+maintenance services; 46 extra specific functions; real all systems/all control modules diagnose; over 40K+ bidirectional actuation tests for diagnosing all control moduels of cars; Powerful full OBD2 Functions; built-in ECU Coding for BMW
/ Audi/ VW/ RollsRoyce; Fr ee V.A.G Guide Function; Battery retistration for new battery adaptation and more. It covers all vehicle diagnostic services and some special professional vehicle maintenance servces, assists you to do home DIY vehicle maintenance or car repair as a pro technician. - NEWEST IN INNOVATION FULL OBD2 SERVICES- iCarsoft auto car diagnostic scanner compatible with CAN-FD, CR MAX can do it all-reads and clears trouble codes, ALL SYSTEM DIAGNOSIS such as engine, transmission, ABS and airbag etc. CR MAX code reader for all cars can perform I/M Readiness, Live Data, Freeze Frame, Vehicle Information, Monitor Test, On-Board Monitor, E vap System Test,O2 Sensor Test,DTC Library Lookup,etc. (Warm Tips: If you car is after 2023,please contact us for compatibility; 3. It comes with 16PIN OBD2 diagnostic adapter, please check your car diagnostic socket if it is 16pin socket, if your car is 14pin diagnostic socket please contact us for the solution.)
- 49 RESET+ 46 SERVICES- Performs: Oil Reset, EPB,SAS,Throttle, D-P - F, Battery, ABS, Injector, TPMS, Suspension, AC, Head Lamp, Body Stablity, Engine, Tramsmission, Airbag, Seat, Door-Win-Roof, Fuel Pump, Door, E-G- R.+21 NEWEST SERVICES( Need update scanner)-AdBlue, Clutch, Crankshaft, High Voltage Battery, Cruise Control, NO xSensor, Rain Sensor, Stop And Start, Turbocharger, Head Up Display, Radar Camera, Vehicle Setup, Cyliner Misfire Check,Speedlimitassist, ControlUnitReset,OxygenSensor, Seatbelt. Extra 46+ extra services based on car brand.(Tips: Quantity of reset/ calibration fucitons are based on car system that your vehicle model has)
- REVOLUTIONARY 40000+BIDIRECTIONAL ACTIVE TESTS: Upgraded CR Max scanner equip with numberous of actuational test items for covering all available vehicle control modules, no longer only do simple light test or window test like other scanners, performs hardware modules test and software control modules test for checking car units or new updated control moduels work well or not after maintenance/ repair/ re-installation/ control system updated (Example for Benz- Roller Sun Blind test; Backup Camera test ;Self-test; EPB test; Transport Mode test;Boost Pressure Positioner test; Fuel Pump test; AND MORE!!).(Warm tip: The available test items are based on control modules your car has)
- ECU CODING+ BATTERY REGISTRATION- Powerful ECU Coding service for BMW/MINI/RollsRoyce / Audi/VW/Seat/Skoda/Bentley/Bugatti/Lamborghini, Improves Engine Power Performance and Optimizes Fuel Efficiency and Match New Hardware Unit to car and Customized a comfortable Driving Modes and Fixes & Updates Original Software Bug. The battery test function for checking car battery health, perform battery reset (BMS ) for replacing a damaged or aging car battery with a new one and register new battery to car ECU
- Scanner POR V2.0 with all obd2 services
- Do the scanning for engine
- Support OBDII/EOBD Ten Modes of Operation
- 【Designed for Most Mercedes-Benz, Sprinter and Smart from 1996-2023】As every car model of Benz has its-owned specific car system and ECUs, not all models are equipped with a complete vehicle ECU, which may cause the scanner to be unable to perform all listed reset services on some models, or even completely incompatible. Like For Sprinter's newer models, it support diagnostic functions only, lacking support for specialized service functions.. So please tell us the car's VIN and required service before purchase for compatibility check. You may also refer to the instructions in the eighth image of the main product photos to perform your inquiry.
- 【Up to 38 Reset Services】MB V3.0 2026 Version diagnostic tool performs Up to 38 maintenance services - Oil Rest , SAS, EPB, ETC, D-P-F, TPMS, ABS, Suspension, Air Conditioner, Head Lamp, Body Stability, Engine Control, Seat, Fuel Pump, Air-Filter, Engine Idle, Door, Im-mo-bilizer, Injector Coding, Transmission Control, Miscellaneous, Adblue, BMS, Cluth, Water Pump, NOxSensor, Rain/Light Sensor, Start/Stop, Radar/Camera, Cylinder Shutoff Test, Speed Limit Assist, Control Unit Reset, Oxygen Sensor, Seat Belt, Cruise Control System, Turbocharger, Crankshaft, Language Setting and etc. (Tips: Please update the software after receiving the product to obtain new service functions)
- 【OE-Level All System OBD2 Scanner】iCarsoft MB V3.0 (2026 Version) diagnostic scanner offers comprehensive OBDII services, allowing you to quickly scan all systems, including the Engine, ABS, SAS, SRS, TPMS, TCM, Fuel Pump System, ESP, EPB, EPS, Suspension, SCM, Adaptive Systems, and more. It supports functions such as reading and erasing codes, checking I/M readiness, viewing freeze frame data, performing O2 sensor tests, conducting on-board monitoring, testing the evap system, auto VIN retrieval, and reading both generic and specific codes, as well as DTCs and battery tests.
- 【Bidirectional Scan Tool】iCarsoft MB V3.0 (2026 Version) Bidirectional scanner supports activate or control a vehicle system or component, allows commanding cars’ modules and receiving info from the ECU to perform active tests on individual components, including EVAP/ABS Motor Pump/Windows/Sunroof and more, to pinpoint fault causes & resolve issues,and allows you to re-learn certain components after making repairs or replacement.
- 【Real Time Record & Graph View】iCarsoft MB V3.0 (2026 Version) can automatically record vehicle text history and identify vehicle information. Preserve real-time data information. View & Graph Live Data. Support Data Review and Print. Multi-language: English, German, Dutch, Spanish, French and so on. We promise to offer Lifetime updates (Lifetime free Update via PC), and confidence in products. We also provide 1 year warranty + extra lifetime hardware free repair if you need it in the future. We prioritize user experience & strive to meet your expectations. Please do feel free to reach out to us if you have any question or problem about the usage, our tech team will service you in time.
This product presentation was made with AAWP plugin.
Last update on 2026-05-13 / Affiliate links / Images from Amazon Product Advertising API