Loading...

NHTSA ID Number: 10203428

Manufacturer Communication Number: SWA1209

TSB/Document Date: 2021-11-08


Summary

A design issue has been identified oin 2012-2013 model year Range Rover Evoque vehicles within the listed VIN range. In wet driving conditions, following a rapid increase in speed after steady state driving modes, condensate from the charge air cooler can build up inside the air induction system which can be drawn in to one of the cylinders causing the engine management system to sense a misfire. The engine fis programmed to react to this misfire by initiating a restricted performance mode to protect the exhaust catalyst, which means that the driver noticeably experiences reduced power to accederate until the next ignition cycle. Furthermore, the Engine Malfunction Indicator Lamp may jilluminate and an engine warning message will display in the instrument cluster message center. New engine control module software has been developed which introduces an alternative restricted performance mode where engine perfornance, under certain conditions such as those triggered by the water inngestion described above, will lessen the degree of restricted performance employed. It is highly likely that the condition will clear when the ignition is cycled.


Owner-Notified Service Action Q237: Engine Control
Module Reflash
3-DEC-12

No.: SWA12-09

Section: WARRANTY

SERVICE
BULLETIN

Market: USA

DESCRIPTION
A design issue has been identified on 2012-2013 model year Range Rover Evoque vehicles within the listed VIN
range. In wet driving conditions, following a rapid increase in speed after steady state driving modes, condensate
from the charge air cooler can build up inside the air induction system which can be drawn in to one of the
cylinders causing the engine management system to sense a misfire. The engine is programmed to react to this
misfire by initiating a restricted performance mode to protect the exhaust catalyst, which means that the driver
noticeably experiences reduced power to accelerate until the next ignition cycle. Furthermore, the Engine
Malfunction Indicator Lamp may illuminate and an engine warning message will display in the instrument cluster
message center.
New engine control module software has been developed which introduces an alternative restricted performance
mode where engine performance, under certain conditions such as those triggered by the water ingestion
described above, will lessen the degree of restricted performance employed. It is highly likely that the condition
will clear when the ignition is cycled.
AFFECTED VEHICLES / OWNER NOTIFICATION
The VIN range of affected vehicles is CH000447 - DH721750. Owner notification is expected to commence the
week of 10 December 2012.
WORKSHOP PROCEDURES
Retailers are required to check DDW to ensure that the vehicle is affected by this Update Prior to Sale notice prior
to undertaking any rework action. Retailers are required to HOLD all affected vehicles in the above VIN range
that are in their control and refrain from releasing the vehicles for new or used vehicle sale pending completion of
the rework action.
Refer to Technical Bulletin Q237NAS: Service Action: Engine Control Module Reflash, for detailed repair
instructions.
PARTS
No parts required
TOOLS
IDS with latest IDS-DVD and Calibration File; first available on IDS-DVD131.08 v.119
Land Rover-approved Midtronics Vehicle Power Supply
WARRANTY
NOTE: Repair procedures are under constant review, and therefore times / prices are subject to change;
those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.
Check DDW to ensure that the vehicle is affected by this program prior to undertaking any rework action. At
the time of confirming a booking for vehicle repair, ensure that all outstanding Service Actions are identified to
ensure the correct parts are available and adequate workshop time is allocated for repairs to be completed at
one visit.
Warranty claims must be submitted quoting Program Code 'Q237' together with the relevant Option Code
from the table. SRO and parts information is included for information only. The Option Code(s) that allows for the
drive in / drive out allowance can only be claimed if the vehicle is brought back into the workshop for this action
alone to be undertaken.

JaguareBay logo Land Rover North America, LLC

555 MacArthur Boulevard

Mahwah, NJ 07430

This program is valid for a limited time only. Warranty claims with a repair date prior to the 30 November 2014
closure date must be submitted for payment within 30 calendar days of completion of the repair.
PROGRAM
CODE

OPTION
CODE

DESCRIPTION

Q237

B

Update Engine control module software

12.90.13

0.20

-

-

Q237

C

Update Engine control module software
Drive in / drive out

12.90.13
02.02.02

0.20
0.20

-

-

Normal Warranty policies and procedures apply

SRO

TIME
(HOURS)

PART NO.

QTY.

Service Action Q237: Sample Owner Letter
Service Action Q237: Engine Control Module Reflash
Dear Range Rover Evoque Owner,
Land Rover is conducting a no-charge Customer Satisfaction Program (Program Code Q237) for owners
of 2012-2013 model year Range Rover Evoque vehicles.

m
pl
e

What is the concern and what will Land Rover and your Land Rover retailer do?
Land Rover is writing to request that you bring your vehicle in for the installation of updated engine
management software which will improve your engine’s response in certain weather conditions.
Specifically, during the course of extended driving (40 minutes or more) in wet conditions, (such as heavy
rain) when your engine speed is steady, followed by a rapid increase in engine speed, it is possible that
an engine misfire may occur. Your engine is programmed to react to this misfire by initiating a restricted
performance mode to protect the exhaust catalyst, which means that the driver noticeably experiences
reduced power to accelerate until the driver has the opportunity to stop and restart the vehicle. If this
mode activates, the Engine Malfunction Indicator Lamp may illuminate and an engine warning message
will display in the instrument cluster message center.

Land Rover would like to install updated engine management software in your engine that will allow the
engine to respond with a restricted performance mode that is less disruptive to your driving experience. If
you have any concerns or questions, please feel free to contact your retailer.
What should you do?
Contact your preferred Land Rover retailer and provide the retailer with your Vehicle Identification
Number (VIN) and request a service date to complete the work required under Program Code Q237.
During this visit, please take the opportunity to discuss any aspect of your vehicle’s operation or
performance with the Retailer team who will be pleased to assist you with any questions you may have
regarding your vehicle in order for you to get the most out of its advanced features.
How long will it take?
The work will be carried out as quickly and efficiently as possible in order to minimize inconvenience to
customers and is expected to take approximately 15-30 minutes, although your retailer may need your
vehicle for a longer time due to service scheduling requirements and vehicle conditioning.
Attention Leasing Agencies: Please forward this notification to the lessee within ten (10) days.

Moved or no longer own a Land Rover?
If you are no longer the owner of this vehicle, Land Rover would appreciate the name and address of the
new owner (if known); please fill out and return the enclosed return postage-paid card.

sa

Additional Information?
Land RovereBay logo is working toward a solution to minimize the need for the vehicle to enter restrictive
performance mode in these limited circumstances. Such update is anticipated for the Spring of 2013 and
will be the subject of a future communication to you.

What should you do if you have further questions?
If you have any questions or concerns, please contact the Service Manager at your authorized Land
Rover retailer for assistance. If you have any queries or concerns that your local Retailer cannot address,
please contact the Land Rover Customer Relationship Center at 800-637-6837, Option 9, and one of our
representatives will be happy to assist you.

You can also contact Land RovereBay logo by email: Visit the website http://www.landroverusa.com, select
'Contact Us' and send an email from the ‘Email Land Rover’ link.
Should you have the need to contact Land Rover by mail, please use the following address:
JaguareBay logo Land Rover North America, LLC
ATTN: Customer Relationship Center
555 MacArthur Boulevard
Mahwah, NJ 07430

Thank you again for selecting Land Rover; your ownership experience is very important to us. We
recognize this service visit may be an inconvenience to you. Land Rover, in cooperation with your
authorized Land RovereBay logo retailer, will strive to minimize any inconvenience to you caused by this program.

Sincerely,

sa

m
pl
e

Peter Pochapsky
Customer Experience Manager

Service Action Q237: Technical Q & A
Main Message:
During the course of extended driving (40 minutes or more) in wet conditions, (such as heavy rain)
when engine speed is steady, followed by a rapid increase in engine speed, it is possible that an engine
misfire may occur. The engine is programmed to react to this misfire by initiating a restricted
performance mode (i.e., reduced acceleration) to protect the exhaust catalyst, which means that the
driver noticeably experiences reduced power to accelerate until the driver has the opportunity to stop
and restart the vehicle. If this mode activates, the Engine Malfunction Indicator Lamp may illuminate
and an engine warning message will display in the instrument cluster message center. Land RovereBay logo
would like to install updated engine management software that will allow the engine to respond to these
conditions with a restricted performance mode that is less disruptive to the driving experience.
Q1

Why is Land Rover conducting this Customer Satisfaction Action?

A

See Main Message above.

Q2

Can you tell me more about what is wrong with the vehicles?

A

The condition is related to water (condensed from humid air) collecting in the engine air intake system
when vehicles cruise for 40 minutes or more at around 50 miles per hour, in wet conditions such as
heavy rain when engine speed is steady. Thereafter, such condensation may be sucked into the
number 3 cylinder of the engine in the event that a rapid engine speed increase is demanded by the
driver. In such event, the engine monitoring systems will detect a misfire and employ restricted
performance mode as a result along with the Engine Malfunction Illuminator Lamp and instrument
cluster warnings. The restricted performance mode clears itself after the vehicle is turned off and
restarted.

Q3

How would the customer become aware of potentially having this concern?

A

The customer will experience restricted performance of the vehicle while driving. The Engine
Malfunction Indicator Lamp may illuminate and an engine warning message will display in the
instrument cluster message center. The restricted performance mode will continue only until the engine
can be turned off and the ignition restarted.

Q4

Does this software update remedy the condition permanently?

A

This update improves the driving experience and lessens the restriction on acceleration. Land Rover is
working toward a solution to minimize the chance of the vehicle entering into restricted performance
mode during extended driving in wet conditions. Such update is anticipated for the Spring of 2013 and
will be the subject of a future communication.

Q5

Have there been any accidents or injuries?

A

There have been no reports of accidents or injuries relating to this concern of which Land RovereBay logo is
aware.

Q6

How was the condition discovered?

A

The condition was identified through Land Rover’s dealer technical field reporting process.

Q7

What will Authorised Repairers do to the vehicles?

A

Authorised Repairers will download the updated engine management software, which is a process that
takes approximately 15-30 minutes.

Q8

How long does it take for the software download?

A

The work will be carried out as quickly and efficiently as possible in order to minimise inconvenience to
customers and is expected to take no longer than 15-30 minutes to complete. Naturally, due to dealer
schedules, vehicles may be required for longer.

Q9

How do I know if my Range Rover Evoque vehicle is affected?

A

All owners of potentially affected vehicles will receive a letter inviting them to contact a Land Rover
dealer for the work to be carried out.

Q10

Can I continue to drive my vehicle until it has had the software update?

A

Yes. If you are driving in wet conditions such as heavy rain for 40 minutes or more at around 50 miles
per hour at a steady engine speed, then take care to avoid a subsequent rapid increase in speed, in
order to minimize the potential of a misfire to occur.

Note:

Please ensure that any Press enquiries are referred to the JaguareBay logo Land Rover North America PR
office.

1

SaleBestseller No. 1
TOPDON RLink J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Enhanced J2534 VCI, Supports J2534/D-PDU/CAN-FD/DoIP, Compatible with 18+ Vehicle Brands, No OE Software Provided
  • J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an...
  • All-in-One OEM Diagnostics: This J2534 ECU programming tool...
  • Proven Performance You Can Trust: Backed by over 10000 real...
  • Integrated Excellence, Always Up-to-Date: Featuring the...
  • Efficiency Meets Versatility: Engineered to support three...
Bestseller No. 2
TOPDON RLink J2534 Reprogramming Tool, High-Speed J2534 Pass-Thru Programmer, OEM Reprogramming and Diagnostic Tool, Supports J2534/D-PDU/CAN-FD/DoIP, 17+ Vehicle Brands Supported
  • Advanced VCI Box, Industry-leading J2534 Pass-Thru...
  • High-Speed OEM-Level Diagnostics & Programming: Unlock true...
  • Coverage for 17 Car Brands & Ultra Reliability: Works...
  • User-Friendly RLink Platform & Expert Support: TOPDON’s...
  • 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...

If the PDF is very large, it may not load in the preview below.

Download PDF [55.09 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: SWA1209

Replacement Service Bulletin Number:

MFR Communication Date: 2012-12-03

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: POWER TRAIN

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
108 Reviews
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Sale
XTOOL D7S Bidirectional Scan Tool, 2026 AI-Assisted OBD2 Scanner Diagnostic Tool with FCA AutoAuth, All System Car Scanner, 39+ Resets, ECU Coding, PMI, Upgrade of D7, Crankshaft Relearn, CAN FD/DoIP
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for FordeBay logo, for LincolneBay logo, and for MazdaeBay logo ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for FordeBay logo, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
  • 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
2026 BOSSCOMM IF745 Scanner Diagnostic Tool, Check Engine Code Reader with 6 Resets, ABS Bleeder/Oil/EPB/SAS/Throttle/Battery, Scanner Diagnostic Tool for Vehicles, Lifetime Free Update, Auto VIN
  • 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
  • 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
  • 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
  • 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.​
  • 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.

This product presentation was made with AAWP plugin.

Share to...