Installation and Conversion Instructions

Taycan (Y1A)
05 / 21 ENU

6600

6

Rear-Mounted Bike Carrier - Taycan Cross Turismo

Vehicle Type:

Taycan Cross Turismo

Model Year:

As of 2021

Parts Info:

Rear bike carrier, RoW: 9J0.813.601
Rear bike carrier, USA: 9J0.813.601.A

Rear bike carrier
– Ready to fit on vehicles with rear bike carrier preparation (Order No. NG1 and standard
equipment in USA)
– Three easy-to-fit parts
– The bike carrier is designed so that it locks in two easy steps.
– No tools are required.
– Capacity: 2 (or 3) bikes, Payload: Max. 50 kg/ 110 lbs
– Optional transport bag, extension set for 3rd wheel rail, access rail and a curved spacer
Parts List:

Additional parts (not included)
9J1.044.801.11

Bag

9J1.044.801.12

Extension set for 3rd wheel rail

9J1.044.801.13

Access rail

9J1.044.801.14

Curved spacer

Tequipment

Sep 10, 2021
Page 1 of 22

6

Taycan (Y1A)
6600

ENU

05/21

Installation and Conversion Instructions

Warnings/Maintenance instructions
Information
CAUTION
Driving with rear bike carrier


Adapt your driving style accordingly.



Read the speed instructions and general information about the rear bike carrier in the Owner's Manual.



Note change in vehicle center of gravity.



The boot can only be opened when the bike carrier is folded down - risk of damage!



On vehicles with optional equipment "Virtual pedal", the tailgate can be opened or closed when you are
working in the rear area provided the connector for the bike carrier is not connected. We recommend that
you deactivate the virtual pedal in the settings.



Do not carry the driver's key while installing the rear bike carrier.



Switch off ignition.
WARNING

Incorrect loading and installing of the rear bike carrier


On uneven ground, we recommend that you set the vehicle to high level in order to offset uneven surfaces,
thereby creating more space between the ground and the bike carrier when installing it. All vehicle height
settings can be used on level ground (e.g. in a garage). Low level makes installing easier because the bike
carrier does not have to be raised as high.



Never load or fit the rear bike carrier on the side of the road.



Make sure that the bikes are secured correctly.



When loading with just one bike, make sure not to trap the locking straps when closing the boot.



Load heavy bicycles at the front (on boot side).



Always check the rear bike carrier and the bikes you are transporting before starting to drive and at
regular intervals during a long trip (max. every 300 km/186 miles) to ensure that they are installed
perfectly and securely on the vehicle and on the rear bike carrier.



Please remove the rear bike carrier completely if you are not using it.



Never drive through a car wash with the rear bike carrier.

Sep 10, 2021
Page 2 of 22

Tequipment

Installation and Conversion Instructions

Taycan (Y1A)
05 / 21 ENU

6600

6

Information
Maintenance instructions
•

Lubricate moving parts, such as hinges of the support bars, flaps and guide pins, at regular intervals
using liquid lubricant in the form of a spray. Do not use grease!

•

Wash using warm water and washing-up liquid, making sure that no water gets into the electric
connector for the lights.

•

Do not store the rear bike carrier lying down as its own weight will put pressure on moving parts. We
recommend that you store the rear bike carrier upright.

•

Never steam-clean the rear bike carrier in a washing bay.

Installing
Installing rear bike carrier

 Overview of components -1- –
 Overview of components -2- –
 Overview of components -3- –
 Overview of components -4- –
 Overview of components -5- –
 Overview of components -6- –
 Overview of components -7- –
 Overview of components -8- –

Overview of components
Support bar
Spacer (short)
Spacer (long)
Rear bike carrier preparation (support bracket)
Fastening tube
Flaps
Number plate holder
Pedals

Tequipment

Sep 10, 2021
Page 3 of 22

6

Taycan (Y1A)
6600

ENU

1.

2.

Sep 10, 2021
Page 4 of 22

05/21

Installation and Conversion Instructions

Figure 1
– Remove supplied emergency release tool and emergency release tool for charge port door 
Figure 1 -2- provided in the tool kit in order to remove the left and right covers on the rear apron.
Important: Please note that the tailgate can open when removing the covers on vehicles with
the optional equipment "Virtual pedal" (VIP).

Figure 2
– Remove left and right covers  Figure 2 -LHD vehicle -. Insert tool  Figure 2 -1- and then pull
it backwards with a jerking movement while holding the cover securely with your other hand 
Figure 2 -2-.

Tequipment

Installation and Conversion Instructions

3.

4.

Taycan (Y1A)
05 / 21 ENU

6600

6

Figure 3
– Insert left and right fastening tubes into the rear bike carrier preparation on the vehicle  Figure
3 -1- and then turn them 45 degrees towards the inside of the vehicle  Figure 3 -2-.

Figure 4
– Check that the fastening tubes  Figure 4 -2- are installed securely in direction of travel.

Tequipment

Sep 10, 2021
Page 5 of 22

6

Taycan (Y1A)
6600

ENU

5.

6.

Sep 10, 2021
Page 6 of 22

05/21

Installation and Conversion Instructions

Figure 5
– Lift the collapsed rear bike carrier so that the Porsche logo is legible the right way around.

Figure 6
– Position the bike carrier as shown so that the Porsche logo is legible and insert guide pins 
Figure 6 -LHD vehicle - into the guides for the fastening tubes  Figure 6 -RHD vehicle - on
both sides.

Tequipment

Installation and Conversion Instructions

7.

8.

Taycan (Y1A)
05 / 21 ENU

6600

6

Figure 7
– Swivel the bike carrier by 90 degrees  Figure 7 -1-. The bike carrier must engage with an
audible click in the pins on the fastening tubes at the left and right  Figure 7 -2 A-.

Figure 8
– Route electric plug connection from the bike carrier  Figure 8 -LHD vehicle - towards the
plug connection on the vehicle side and connect it. Plug connector straight in and turn it to
the right. When routing the cable, make sure that it has adequate clearance so that it is not
touching/rubbing against any component. Important: When actuated using the key or the
control panel in the vehicle, the tailgate only pops up. The tailgate opens electrically when the
button in the rear apron is pressed. Please press the button only when the bike carrier is folded
down and when there is sufficient clearance between it and the tailgate because otherwise,
the tailgate could hit against the bike carrier and could be damaged. If the connector is not

Tequipment

Sep 10, 2021
Page 7 of 22

6

Taycan (Y1A)
6600

ENU

05/21

Installation and Conversion Instructions

connected, the bike carrier and tailgate can hit against each other as described above because
the tailgate then opens electrically.
Operating principle of locking straps The locking straps on the spacers have an anti-theft feature,
which means that when the locking strap locks in the guide, the lock and unlock mechanism on the
support bar can no longer be moved.

Sep 10, 2021
Page 8 of 22

9.

Figure 9
– The locking strap must first be pushed into the ratchet.

10.

Figure 10
– The strap can be tightened using the lever.

Tequipment

Installation and Conversion Instructions

11.

Figure 11
– To loosen the strap, press the grey lever as shown.

12.

Figure 12
– The locking strap can be pulled out of the ratchet.

Tequipment

Taycan (Y1A)
05 / 21 ENU

6600

6

Sep 10, 2021
Page 9 of 22

6

Taycan (Y1A)
6600

ENU

13.

14.

Sep 10, 2021
Page 10 of 22

05/21

Installation and Conversion Instructions