Technical Service Bulletin

39-20-01 - Bevel Box Case Half Leak

Transaction
No:

2060391/6

Release date:

7/29/2021

Condition
Applicable Vehicles
Model(s)

Year

Eng. Code

Trans. Code

VIN Range
From

VIN Range To

Arteon

2019-2021

All

All

All

All

Atlas Cross
Sport

2020-2021

All

All

All

All

Atlas

2018-2021

All

All

All

All

Tiguan

2018-2021

All

All

All

All

Revision Table
Instance Number

Published Date

Version Number

Reason For Update

2060391/6

7/29/21

39-20-01

To adjust labor operation
details.

2060391/4

5/3/21

39-20-01

To remove Tiguan labor
operation 44051900 per
Saga and Elsa updates.

2060391/3

3/29/21

39-20-01

To include updated
vehicle break
information.

2060391/2

2/16/21

39-20-01

To include updated labor
operation.

2060391/1

8/14/20

39-20-01

Original publication.

Customer states fluid leak from the front of the vehicle.

Page 1 of 7
© 2021 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

39-20-01 - Bevel Box Case Half Leak

Transaction
No:

2060391/6

Release date:

7/29/2021

Technical Background
Gear oil leak from the case halves of the bevel box due to currently used sealant type (Figure 1).

Figure 1.
Source of leak is between the case halves at the right side of the bevel box between the two bolts seen in
Figure 2 (red and black arrows).

Figure 2.

Page 2 of 7
© 2021 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

39-20-01 - Bevel Box Case Half Leak

Transaction
No:

2060391/6

Release date:

7/29/2021

Production Solution
Improved bevel box design used in vehicle production as of March 26th 2021.

Service
If the bevel box leak is confirmed to be from between the case halves, perform the following steps:
Note:
The repair described here applies to bevel box 0A6 only.
If the source of the leak is not from the case halves, this TB does not apply.
 Remove the bevel box per ElsaPro instructions.
 Clean the exterior of the bevel box of any leaked gear oil using a residue free cleaner.
 Remove old sealant from the exterior of the bevel box in the area where new exterior sealant will be
applied as see in Figure 3, (between red lines and yellow arrows).
Tip:
A scraper or razor can be used to remove old sealant from the surface of the bevel box.

Figure 3.
 Using silicone sealant part number D 174 003 M2, apply a 10 mm wide 3mm high bead of silicone
sealant on the case halves in the area shown in Figure 3.
Page 3 of 7
© 2021 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

39-20-01 - Bevel Box Case Half Leak

Transaction
No:

2060391/6

Release date:

7/29/2021

 Also apply a continuous bead of the silicone sealant to the face of the two bolt holes seen in Figure 4.
Note:
Ensure that the silicone sealant is applied as pictured in Figure 4. Only apply silicone sealant to
the outer surface of the bevel box and do not allow silicone sealant to get into the bolt holes or
threads as reassembly will be difficult.

Figure 4.
 Allow the silicone sealant to cure for at least two hours, reassemble the bevel box into the vehicle per
ElsaPro instruction, road test and check for any further signs of leakage.
Note:
Due to the gear oil leak, the bevel box fluid level will need to be checked and if needed topped up.
 If leaking continues, contact the Volkswagen Technicians Helpline.

Page 4 of 7
© 2021 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

39-20-01 - Bevel Box Case Half Leak

Transaction
No:

2060391/6

Release date:

7/29/2021

Warranty
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies
and Procedures Manual 1)
Model(s)

Year(s)

Eng. Code(s)

Trans.
Code(s)

VIN Range
From

VIN Range To

Arteon

2019-2020

All

All

All

All

Atlas Cross
Sport

2020

All

All

All

All

Atlas

2018-2020

All

All

All

All

Tiguan

2018-2020

All

All

All

All

SAGA Coding
Claim Type:

Use applicable Claim Type 1)

Service Number:
3970
Parts Manufacturer

Damage
Code
0050

HST

--

--

--

Arteon, Atlas, Atlas Cross Sport

WWO 2)

Tiguan

3ME 2)

Labor Operation 3) : Arteon

39701954 - See ElsaPro for latest time units

Remove and Install Bevel Box
Labor Operation 3) : Arteon

404119XX - See ElsaPro for latest time units

Remove and Install Driveshaft
Labor Operation 3) : Arteon

44051900 - See ElsaPro for latest time units

Remove and Install Wheel
Labor Operation 3) : Atlas, Atlas Cross Sport (V6)

39701950 - See ElsaPro for latest time units

Remove and Install Bevel Box
Labor Operation 3) : Atlas, Atlas Cross Sport (V6)

26171990 - See ElsaPro for latest time units

Page 5 of 7
© 2021 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

39-20-01 - Bevel Box Case Half Leak

Transaction
No:

2060391/6

Release date:

7/29/2021

Remove and Install Front Exhaust Pipe
Labor Operation 3) : Atlas, Atlas Cross Sport (V6)

26121990 - See ElsaPro for latest time units

Remove and Install Shield
Labor Operation 3) : Atlas, Atlas Cross Sport (V6)

24471990 - See ElsaPro for latest time units

Upper Intake Manifold Removed+Reinstalled
Labor Operation 3) : Atlas, Atlas Cross Sport (V6)

24381940 - See ElsaPro for latest time units

Air Hose Remove+Install
Labor Operation 3) : Atlas, Atlas Cross Sport (2.0T) 39701973 - See ElsaPro for latest time units
Remove and Install Bevel Box
Labor Operation 3) : Atlas, Atlas Cross Sport (2.0T) 10821900 - See ElsaPro for latest time units
Noise Dampening Pan Removed+Installed
Labor Operation 3) : Atlas, Atlas Cross Sport (2.0T) 39903550 - See ElsaPro for latest time units
and (3.6)
Final Drive Oil Inspected+Added
Labor Operation 3) : Atlas, Atlas Cross Sport

37023550 = See Elsa for latest time units.

ATF Inspected and added
Labor Operation 3) : Atlas, Atlas Cross Sport (2.0T) 01500000 = 30 TU max.
and (3.6) ONLY.
Labor Operation 3) : Tiguan

39701999 = 190 TU

Remove and Install Bevel Box + Clean/Prep
Labor Operation 3) : Tiguan

404119XX = See ElsaPro for latest time units

Front driveshaft
Labor Operation 3) : Tiguan

26171970 = See ElsaPro for latest time units

Front Exhaust Pipe Remove+Installed

Labor Operation 3) : All (except Tiguan)

39701999 = 20 TU

Clean/prep Bevel Box
Page 6 of 7
© 2021 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.

Technical Service Bulletin

39-20-01 - Bevel Box Case Half Leak

Transaction
No:

2060391/6

Release date:

7/29/2021

397019XX – Bevel Box Labor

Causal Part:

Diagnostic Time 4)
GFF Time expenditure

01500000 = Actual GFF print out

NO

Road Test

01210004 = 10 TU

YES

Technical Diagnosis

01320000 = 00 TU max.

NO

Claim Comment: Input “As per Technical Bulletin 2060391” in comment section of Warranty Claim.
1)

Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only.

2)

Code per warranty vendor code policy.

3)

Labor Time Units (TUs) are subject to change with ELSA updates.

4)

Documentation required per Warranty Policies and Procedures Manual.

Required Parts and Tools
Tool Description

Tool No:

Silicone Sealant

D 174 003 M2

Axle Oil

G 052 145 S2

12 Point Socket Head Screw (x3) (Tiguan)

N 908 461 02

Gasket (Tiguan)

5Q0 253 115 B

Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.

Page 7 of 7
© 2021 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.