NHTSA ID Number: 10199481
Manufacturer Communication Number: 21B42
TSB/Document Date: 2021-08-02
Summary
All of the affected vehicles were built with front spring and front gross axle weight rating (FGAWR) below the customer expected value. The marketing Order Guide stated that on units equipped with Ambulance & Wrecker packages, customers would get up to 7000 lb front spring FGAWR. The front coil springs were built to match the FGAWR labels on these units. The customer did not receive the front coil spring capability they were expecting based on the data in the marketing Order Guide and their reserve capacity might be lower than expected.
David J. Johnson
Director
Service Engineering Operations
Ford
Customer Service Division
Ford
Motor Company
P. O. Box 1904
Dearborn, Michigan 48121
July 13, 2021
TO:
All U.S. Ford
and Lincoln
Dealers
SUBJECT:
Customer Satisfaction Program 21B42
Certain 2020-2021 Model Year F-350 to F-550 Ambulance and Wrecker Vehicles
Equipped with a 6.7L Diesel or 7.3L Gas Engine
Certification Label and Front Spring Mismatch to Order Guide
PROGRAM TERMS
This program will be in effect through July 31, 2022. There is no mileage limit for this program.
URGENCY / EXPIRATION DATE
This Customer Satisfaction Program has an expiration date of July 31, 2022.
We recommend dealers utilize their FSA VIN Lists name and address available on July 13, 2021 to
contact customers with affected vehicles to determine which of the three options, as described below,
the customer will be selecting.
AFFECTED VEHICLES
Vehicle
Model Year
Assembly Plant
Build Dates
Super Duty
F-350
F-450
2020-2021
Kentucky Truck,
Ohio Assembly
November 16, 2019 through November 09, 2020
F-550
Affected vehicles are identified in OASIS and FSA VIN Lists.
REASON FOR THIS PROGRAM
All of the affected vehicles were built with front spring and front gross axle weight rating (FGAWR)
below the customer expected value. The marketing Order Guide stated that on units equipped with
Ambulance & Wrecker packages, customers would get up to 7000 lb front spring FGAWR. The front
coil springs were built to match the FGAWR labels on these units. The customer did not receive the
front coil spring capability they were expecting based on the data in the marketing Order Guide and
their reserve capacity might be lower than expected.
SERVICE ACTION
For in-stock vehicles: Before delivering any new in-stock vehicles involved in this program, dealers
are to replace the vehicle’s certification weight label, both front coil springs, and for F-350 4X2 Twin I
Beam vehicles only perform a front wheel alignment.
(Continued on next page)
Copyright 2021 Ford
Motor Company
For sold vehicles: Customers have three options associated with this program (Refer to the Owner
Letter for more information):
1. Compensation for the equivalent value of the vehicle specification originally ordered ($125).
See Customer Waiver at the bottom of the Customer Letter.
2. Dealer to modify the vehicle to meet the original specified FGAWR of up to 7000 lbs by
replacing both front coil springs and the safety certification label at no charge to the vehicle
owner.
3. Dealer to process a refund request for a previously paid repair of front coil springs. See
Refund section below for more information.
OWNER NOTIFICATION MAILING SCHEDULE
Owner letters are expected to be mailed the week of July 26, 2021. Dealers should repair any affected
vehicles that arrive at their dealerships, whether or not the customer has received a letter.
ATTACHMENTS
Attachment I:
Administrative Information
Attachment II:
Labor Allowances and Parts Ordering Information
Attachment III:
Technical Information
Owner Notification Letter
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web
Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician
System (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or
listed under the SSSC tab.
Sincerely,
David J. Johnson
Copyright 2021 Ford
Motor Company
ATTACHMENT I
Page 1 of 2
Customer Satisfaction Program 21B42
Certain 2020-2021 Model Year F-350 to F-550 Ambulance and Wrecker Vehicles Equipped with a
6.7L Diesel or 7.3L Gas Engine - Certification Label and Front Spring Mismatch to Order Guide
OASIS ACTIVATION
OASIS will be activated on July 13, 2021.
FSA VIN LISTS ACTIVATION
FSA VIN Lists will be available through https://web.fsavinlists.dealerconnection.com on July 13, 2021.
Owner names and addresses will be available by August 13, 2021.
NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle
registration records. The use of such motor vehicle registration data for any purpose other than in
connection with this program is a violation of law in several states, provinces, and countries.
Accordingly, you must limit the use of this listing to the follow-up necessary to complete this service
action.
SOLD VEHICLES
• Owners of affected vehicles will be directed to dealers for repairs.
• Immediately contact any of your affected customers whose vehicles are not on your VIN list
but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when
available) and schedule a service date.
• Correct other affected vehicles identified in OASIS which are brought to your dealership.
• Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle
inventory.
STOCK VEHICLES
• Correct all affected units in your new vehicle inventory before delivery.
• Use OASIS to identify any affected vehicles in your used vehicle inventory.
TITLE BRANDED / SALVAGED VEHICLES
Affected title branded and salvaged vehicles are eligible for this service action.
OWNER REFUNDS
• Ford
Motor Company is offering a refund for owner-paid repairs covered by this program if the
repair was performed before the date of the Owner Notification Letter. This refund offer expires
July 31, 2022.
• Dealers are also pre-approved to refund owner-paid emergency repairs that were performed
away from an authorized servicing dealer after the date of the Owner Notification Letter. Noncovered repairs, or those judged by Ford
to be excessive, will not be reimbursed.
• Refunds will only be provided for the cost associated with front coil spring replacement.
RENTAL VEHICLES
Rental vehicles are not approved for this program.
Copyright 2021 Ford
Motor Company
ATTACHMENT I
Page 2 of 2
Customer Satisfaction Program 21B42
Certain 2020-2021 Model Year F-350 to F-550 Ambulance and Wrecker Vehicles Equipped with a
6.7L Diesel or 7.3L Gas Engine - Certification Label and Front Spring Mismatch to Order Guide
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
• For related damage and access time requirements, refer to the Warranty and Policy Manual /
Section 6 – Ford
& Lincoln
Program Policies / General Information & Special Circumstances
for FSA’s / Related Damage.
• For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is
required, although related damage must be on a separate repair line with the “Related
Damage” radio button checked.
o Ford
vehicles – 3 years or 36,000 miles
• For vehicles outside new vehicle bumper-to-bumper warranty coverage, submit an Approval
Request to the SSSC Web Contact Site prior to completing the repair.
CLAIMS PREPARATION AND SUBMISSION
• Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty
Solution (OWS) online.
o When entering claims:
Claim type 31: Field Service Action. The FSA number (21B42) is the sub code.
Customer Concern Code (CCC): A99 - Administrative, mis-built
Condition Code (CC): 38 - Wrong Part
Causal Part Number: 5310
Part Quantity: 0
o For additional claims preparation and submission information, refer to the Recall and
Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
• Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a
separate repair line from the FSA with same claim type and sub code as described in Claim
Entry above.
IMPORTANT: Click the Related Damage Indicator radio button.
• Provision for Locally Obtained Supply: Includes the following Motorcraft chemicals or
equivalent - XL-2 High Temp Nickel Anti-Seize Lubricant and XO-5W20-QFS SAE Full
Synthetic Motor Oil.
o Program Code: 21B42
o Misc Expense: OTHER
o Amount: Actual cost up to $3.00
•
Refunds: Submit refunds on a separate repair line.
- Program Code: 21B42
- Misc. Expense: ADMIN
- Misc. Expense: REFUND
- Misc. Expense: 0.2 Hrs.
o Multiple refunds should be submitted on one repair line and the invoice details for each
repair should be detailed in the comments section of the claim.
Copyright 2021 Ford
Motor Company
ATTACHMENT II
Page 1 of 3
Customer Satisfaction Program 21B42
Certain 2020-2021 Model Year F-350 to F-550 Ambulance and Wrecker Vehicles Equipped with a
6.7L Diesel or 7.3L Gas Engine - Certification Label and Front Spring Mismatch to Order Guide
LABOR ALLOWANCES
Description
Replace Certification Label (Includes SSSC Contact) and
Replace Both (LH/RH) Front Coil Springs
Alignment for Front Total Toe
F-350 4X2 Twin I beam Vehicles Only.
Labor Operation
Labor Time
21B42B
1.3 Hours
21B42C
0.6 Hours
PARTS REQUIREMENTS / ORDERING INFORMATION
Part Number
Description
Order
Quantity
Claim
Quantity
F-450 - F-550 Monobeam Frame Only - 4X4 and 4X2
5C3Z-5310-AA
Front Coil Spring
2
2
W717718-S439
Flange Nut - Shock Absorber Lower
2
2
W500765-S439
Bolt - Shock Absorber Lower
2
2
W520214-S440
Nut - Stabilizer Link Upper
2
2
XL-2
Motorcraft® High Temperature Nickel Anti-Seize
Lubricant
XO-5W20-QFS
Motorcraft® SAE 5W-20 Full Synthetic Motor Oil
(Use on Wheel Stud Threads)
Part Number
Description
Claim as
Misc. Other
Up to $3.00 Total
Order
Quantity
Claim
Quantity
F350 Twin-I Beam Frame Only - 4X2
7C3Z-5310-ZC
Front Coil Spring - F-350 4X2 Twin-I Beam
2
2
N806085-S441
Nut - Shock Absorber Lower
2
2
N802455-S439
Fastener - Upper Spring Bracket
2
2
34992-S2
Nut - Lower Spring
2
2
W706345-S439
2
2
W520117-S441
Nut - Sway Bar Link Upper
2
2
XL-2
Motorcraft® High Temperature Nickel Anti-Seize
Lubricant
XO-5W20-QFS
Motorcraft® SAE 5W-20 Full Synthetic Motor Oil
(Use on Wheel Stud Threads)
Claim as
Misc. Other
Up to $3.00 Total
PARTS REQUIREMENTS / ORDERING INFORMATION Continued on Next Page
Copyright 2021 Ford
Motor Company
ATTACHMENT II
Page 2 of 3
Customer Satisfaction Program 21B42
Certain 2020-2021 Model Year F-350 to F-550 Ambulance and Wrecker Vehicles Equipped with a
6.7L Diesel or 7.3L Gas Engine - Certification Label and Front Spring Mismatch to Order Guide
PARTS REQUIREMENTS / ORDERING INFORMATION (continued)
Part Number
Description
Order
Quantity
Claim
Quantity
F-350 Monobeam Frame Only - 4X4
5C3Z-5310-CA
Front Coil Spring - F-350 4X4 Monobeam
2
2
W717718-S439
Flange Nut - Shock Absorber Lower
2
2
W500765-S439
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 21B42
Replacement Service Bulletin Number:
MFR Communication Date: 2021-07-13
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 2026 ALL-IN-ONE HEAVY DUTY TRUCK SCANNER – BUILT FOR DIESEL DIAGNOSTICS:The ANCEL X7HD PRO combines full-system diagnostics, bi-directional control, ECU coding, HDOBD/OBD2 functions, and 42+ reset services in one powerful heavy duty truck scanner. This diesel scan tool helps technicians, fleet owners, and repair shops diagnose problems faster, reduce downtime, and complete more repairs without switching between multiple truck diagnostic tools. Features a 10.1" Android tablet, Bluetooth & Wi-Fi, live data graphing, and 2 years of f-ree updates
- 42+ RESET FUNCTIONS – MORE THAN A BASIC TRUCK CODE READER:Perform essential service functions including forced DPF regeneration, injector coding, speed limiter adjustment, idle adjustment, oil reset, ABS reset, SRS reset, EPB reset, throttle reset, and suspension calibration. Designed for real truck maintenance and fleet service, this commercial truck diagnostic scanner helps reduce dealer visits, avoid unnecessary downtime, and handle more repair jobs with one diesel diagnostic tool
- ACTIVE TEST & ECU CODING – ADVANCED BIDIRECTIONAL SCAN TOOL FOR TRUCKS:Quickly locate faults by activating components and sending commands directly to vehicle systems. Test injectors, ABS, throttle, cooling systems, and other modules in real time without unnecessary disassembly. ECU coding and module matching help adapt replacement parts, restore factory settings, and reduce repeat repairs, making this semi truck scan tool ideal for advanced troubleshooting and daily shop work
- FULL-SYSTEM HDOBD/OBD2 DIAGNOSTICS – WIDE TRUCK & ENGINE COVERAGE:Read and clear codes, monitor live data, freeze frame, and diagnose engine, transmission, ABS, body, and other major systems. Compatible with Freightliner
, Kenworth
, Peterbilt
, Volvo
, Mack
, International
, and other commercial truck brands, plus Cummins
, Caterpillar
, Detroit, Paccar
, and Navistar
diesel engines. Also supports full OBD2/EOBD diagnostics for standard vehicles, making it a versatile truck obd2 scanner for mixed fleets and repair shops - PROFESSIONAL HARDWARE + RELIABLE SUPPORT – BUILT FOR DAILY SHOP USE:This professional diesel diagnostic computer features a 10.1" touchscreen, Android 10.0 system, 6000mAh battery, Bluetooth/Wi-Fi connectivity, and built-in front & rear cameras for documenting repairs and remote troubleshooting. Includes 2 years of fr-ee updates, 1-year w-arranty, and responsive technical support. Contact [email protected] before purchase to confirm compatibility and supported functions for your truck or diesel engine
- 【Built for Heavy Duty Diesel Diagnostics】Designed for SAE J1939 and J1708 compliant trucks, buses, and diesel-powered commercial vehicles. HD601 truck scanner diagnostic tool helps owner-operators, small fleets, mobile technicians, and independent repair shops quickly identify fault codes, view live data, and make informed repair decisions—saving time, reducing downtime, and avoiding unnecessary shop visits
- 【Full System Diagnostics+All HD OBD Modes】The New HD601 heavy duty truck scanner delivers full-system diagnostics on SAE J1939 and J1708-compliant commercial vehicles—digging into engine, transmission, ABS, fuel, every system that keeps your rig rolling. It supports all HD OBD modes, giving you live data, freeze frame, ECU info, vehicle info, emissions data tracking, plus code reading and clearing. Not just what broke, but why—so you fix it right the first time. Pinpoint issues faster, cut repair costs, and spend less time on the shoulder
- 【Wide Heavy-Duty Vehicle Coverage】Supports a wide range of heavy-duty vehicle manufacturers and systems, including Freightliner
, Kenworth
, Peterbilt
, Volvo
, International
, Detroit, Cummins
, Paccar
, Allison, Eaton
, Bendix
, Wabco, and more. Coverage varies by vehicle make, model, year, and system configuration. Contact our support team before purchase if compatibility verification is needed - 【Speaks Major Truck Protocol】The New HD601 diesel truck scanner is built for American-made trucks—and supports the heavy‑duty protocols you' re most likely to run into on the road: SAE J1939, J1708/J1587, ISO 15765‑4, ISO 14230‑4, ISO 9141‑2, J1850 PWM/VPW, ISO 27145‑4, and EURO‑6. For most trucks, model years, and systems, it speaks the language your vehicle understands. Just plug it in and start diagnosing—no guesswork, no gatekeeping. Note: vehicle functions and module availability may vary by manufacturer and model year
- 【Save Hundreds on Diagnostic Fees】Why pay $150–300 for someone to read your codes? With the New ANCEL heavy duty truck scanner, you can pull fault codes yourself—in minutes, without leaving the truck. One or two uses pays for the tool. After that, every diagnostic is money back in your pocket. Smart investment for owner-operators, techs, and small fleets. Read and clear stored fault codes in minutes. Active fault codes may require repairs before they can be cleared
- 【One Tool, Total Fleet Coverage: 6/9/16 Pin Ready】Featuring an integrated 16-pin OBD2 connector and professional-grade 6-pin & 9-pin adapters, this heavy duty truck scanner provides extensive support for J1939, J1708, J1587, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 protocols. It offers reliable diagnostic coverage for major American diesel brands—including Cummins
, Paccar
, Caterpillar
, Detroit, and Freightliner
—making it a versatile semi truck scanner for managing any diverse fleet. - 【2 in 1 Diesel Code Reader & Advanced HD OBDII】Equipped with professional-grade diesel scanner capabilities, the HD301 features intuitive Read/Erase codes and turn off the "Check Engine" light. With the built-in DTC Lookup library, you can instantly access fault code definitions on-device without searching the internet. It also retrieves hundreds of essential live sensor data—such as coolant temperature, fuel pressure, and engine RPM—in a stable text format for precise and rapid troubleshooting. (Please note that the HD301 can not support DPF Regen.)
- 【Full System Truck Diagnostic】The FOXWELL HD301 heavy duty scan tool is engineered to deeply access and scan all available electronic control modules specifically for truck, including Engine, Transmission, ABS, SRS, Chassis, and Body Control. This professional truck scanner diagnostic tool allows you to identify issues across the entire vehicle, ensuring your rig stays in peak condition for the long haul.
- 【Versatile for most big Rigs: Commercial, Passenger & Beyond】Engineered for more than just trucks, this heavy duty scan tool offers extensive coverage for pickups, buses, trailers, and even marine vessels. From construction machinery (excavators, loaders) to agricultural equipment (tractors, harvesters), it provides a true all-in-one diagnostic solution.
- 【Plug-and-Play & No Subscription】Designed for the road! No WiFi, no batteries, and no complex App setup required. Simply plug it into your vehicle’s diagnostic port to start scanning immediately. Enjoy lifetime free software updates to keep your HD301 diesel truck scanner current with the latest vehicle models and features—without any hidden subscription fees—While overcoming language barriers with support for Spanish and English.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




