NHTSA ID Number: 10199237
Manufacturer Communication Number: 18NA361
TSB/Document Date: 2021-07-19
Summary
This technical bulletin provides a procedure to flush the cooler lines to validate if there is excessive debris in the fuel system caused by a failed part.
Service Bulletin
Bulletin No.:
18-NA-361
Date:
May, 2021
TECHNICAL
Subject:
Diagnostic Tip for Diesel Fuel System Contamination, Malfunction Indicator Lamp (MIL)
Illuminated - DTC P026D, P2A00, P0171, P0172 and/or P0300 Set
Brand:
Model:
Model Year:
VIN:
from
to
Engine:
from
to
Esclade
2021
2021
3.0L Turbo
Diesel (LM2)
Cruze
2014
2015
2.0L
Diesel (LUZ)
Cruze
2018
2019
Equinox
2018
2019
Silverado
2017
2018
6.6L Turbo
Diesel (L5P)
Silverado 1500
2020
2021
3.0L Turbo
Diesel (LM2)
1.6L
Diesel (LH7)
Chevrolet
Silverado 2500/3500
2019
2021
6.6L V-8
Duramax
Turbo
Diesel (L5P)
Silverado 4500HD,
5500HD and 6500HD
2019
2021
6.6L V-8
Duramax
Turbo
Diesel (L5D)
Suburban
2021
2021
3.0L Turbo
Diesel (LM2)
Sierra
2017
2018
6.6L V-8
Duramax
Turbo
Diesel (L5P)
Sierra 1500
2020
2021
3.0L Turbo
Diesel (LM2)
—
—
Sierra 2500/3500
2019
2021
6.6L V-8
Duramax
Turbo
Diesel (L5P)
Terrain
2018
2019
1.6L
Diesel (LH7)
Yukon
2021
2021
3.0L Turbo
Diesel (LM2)
Copyright 2021 General Motors LLC. All Rights Reserved.
—
Page 2
Involved Region or Country
May, 2021
Bulletin No.: 18-NA-361
North America, Israel
Some customers may comment that the MIL is illuminated.
Condition
5168457
Note: If removing the fuel filter from the filter housing, clean the outside of the fuel filter
assembly prior to removing the fuel/water filter from the housing.
Some technicians may find metal particles in the fuel system during diagnostics.
Important: If the fuel/water filter has been removed for inspection, Do Not install the
filter back into the housing until the fuel/water separator reservoir has been cleaned.
Refer to the Information on Fuel/Water Filter Removal section below.
Some technicians may also find one or more of the following DTCs set in the Engine
Control Module (ECM):
• P0171: Fuel System Lean
• P0172: Fuel System Rich
• P026D: Injection Quantity Too High
• P0300: Engine Misfire Detected
• P2A00: HO2S Performance Sensor 1
Correction
If you encounter such a situation, DO NOT replace the fuel system as described in
Service Bulletin #16-NA-102.
Please perform the following fuel system flushing procedure prior to performing further
diagnostics.
Once the fuel system has been flushed, continue with diagnostics as described in SI.
Bulletin No.: 18-NA-361
May, 2021
Page 3
Information on Fuel/Water Filter
Removal
5417281
5417311
Water or other like contaminates in the fuel will create
driveability concerns and loss of engine power. If water
and/or debris is present in the fuel system, the fuel
cannot cool and lubricate the components properly,
causing overheating, rust and corrosion. This can result
in component failure. Water and debris can enter the
fuel system in several ways, either through a
contaminated refueling source, plugged venting or
through long term condensation in the vehicle fuel
tanks.
1. Remove the fuel/water filter from the housing using
care not to separate the filter from the fuel/water
separator reservoir.
Page 4
May, 2021
5417298
2. Using care, separate the filter from the fuel/water
separator reservoir by placing the filter downwards
in a clean/dry drain pan.
Bulletin No.: 18-NA-361
5417283
– If the filter is facing upwards, debris left on the
sides of the filter may escape past the O-ring
seal during removal and settle in the fuel/water
separator reservoir.
– Water and/or debris left in the fuel/water
separator reservoir will flow past the filter, directly
into the fuel system when re-started.
– Debris that is allowed past the filter and into the
fuel system can cause fuel injection issues that
may set DTCs P2A00, P026D, P0300, P0172.
Replacement of fuel injectors without a complete
cleaning of the fuel system will only be a
temporary fix until the debris gets into the new
injectors.
3. Inspect the fuel/water separator reservoir and filter
for heavy debris.
• If heavy debris is found in the filter, clean the
fuel/water separator reservoir and continue to
the Fuel System Flushing Procedure below.
• If no signs of debris are found, clean the fuel/
water separator reservoir, install a new filter and
refer to SI for further diagnostics.
Bulletin No.: 18-NA-361
May, 2021
Fuel System Flushing Procedure
Note: Performing the test may aid in determining the
source and section of the fuel system causing the
contamination.
Page 5
7. Install a clear line between the fuel supply hose
and the fuel return hose.
8. Run the fuel pump until the fuel runs clear in
the line.
1. If removed, re-install the fuel filter.
5168447
5167517
2. Disconnect the chassis side fuel feed hose (3) from
the engine side fuel feed pipe (4).
3. Place the end of the chassis side fuel feed hose
into a clean container and run the fuel pump to
clean any debris left in the fuel lines, approximately
2-3 gallons (7.6-11.4L).
4. Clean the fuel/water separator reservoir.
5. Install a new fuel filter.
6. Disconnect the chassis side fuel return hose (2)
from the engine side return pipe (1).
Note: The white “Tubing” shown in the graphics below
depict the route of the clear line, not the length.
5168476
9. Connect the fuel supply hose to the engine
supply pipe.
10. Install a clear line in series at the fuel return hose
to the engine return pipe.
11. Run the fuel pump until the fuel runs clear in
the line.
Reconnect all fuel lines and retest for any codes or
symptoms in the vehicle.
Parts Information
No parts are required for this repair.
Page 6
May, 2021
Bulletin No.: 18-NA-361
Version
8
Modified
Released December 10, 2018
Revised June 24, 2019 – Added 2020 to Model Year.
Revised August 14, 2019 – Added 2019 and 2020 Silverado HD Models.
Revised October 03, 2019 – Added Information on Fuel/Water Filter Removal section.
Revised October 14, 2019 – Removed LCF and added 2020 Silverado/Sierra 1500
with LM2.
Revised September 09, 2020 – Added DTCs to the Subject, Condition and Information on
Fuel/Water Filter Removal sections.
Revised October 20, 2020 – Added the 2021 Model Year to Silverado and Sierra Models
and additional engine descriptions.
Revised May 06, 2021 - Add Note to Condition section to clean the Filter Housing
Assembly.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these
technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper
service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a
job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your
vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the
information.
WE SUPPORT VOLUNTARY
TECHNICIAN
CERTIFICATION
- Restores fuel economy
- Stabilizes ethanol
- Maximizes horsepower
- Improves responsiveness
- For use in both gasoline and diesel engines
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 18NA361
Replacement Service Bulletin Number:
MFR Communication Date: 2021-05-06
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs.
- 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 2026 Newest Wireless Bluetooth Scan Tool D1: OTOFIX D1 Diagnostic scanner is upgraded version with Enhanced Hardwares & Newest Functions, FASTER and SMARTER! ✅Alternative Bluetooth 5.0 +USB connect✅2G+64GB✅Android 9.0 OS✅5G & 2.4 GHz Dual WiFi✅5800mAh battery👍VAG Guided Function👍ECU Online Coding👍CANFD&DOIP👍40+ Services👍Bi-Directional Control👍Full Systems Diagnose👍2 Years Free Update👍150+ Vehicle Coverage🎁Contact to get gift: otofixaftersales-amz@ outlook.com
- ECU Coding to Unlock the Hidden Features: OTOFIX D1 obd2 scanner diagnostic tool newly adds ECU Coding which can Online Coding(ONLY for VW/Au.di/Sk0da), Variant Coding/Offline Programming, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, disbale auto start-stop, sunroof initialization, injector calibration, etc. PS: Coding functions vary by model&year.
- Full Bidirectional Control for Active Car Tests: The D1 OTOFIX scanner also offers bi-directional control, allowing you to perform powerful active tests on car subsystems. This means that you can check the working status and functionality of open & close solenoids, energize injectors, turn cooling fan on & off, and more, all from the device itself.🚩The D1 bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.**Note that Active Tests available depend on the make/model/year of your car.
- 40+ Popular Maintenance Functions: OTOFIX D1 obd scanner for car performs 40+ hot services, including Oil Reset, EPB, TPMS, BMS, E.GR, G.PF, D.PF, SAS Calibration, ABS Bleeding, Injector Coding, Gearbox Match, Suspension, Crankshaft Relearn, Power Balance, etc., still growing. Great choice for DIYers, technician, repair shop. 🚩Get MORE special functions from "Car Brand>System>Service". Check compatibility before purchase via 📧 otofixaftersales-amz@ outlook.com.
- OE-Level All Systems Diagnostic + One-Click AutoVIN & AutoSCAN: OTOFIX D1 scanner automotriz gives you the ability to troubleshoot entire car systems including engion system,transmission system,body system,chassis,etc. 🚩One of the standout features of the D1 obd2 scanner diagnostic tool is the one-click AutoVIN & AutoScan function. This feature allows you to quickly and easily scan all diagnosable ECUs with just one click, and identify any problems hidden in your vehicle's systems.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.