Installation and Conversion Instructions

911 (991)
13/16

ENU

6820

6

Smoker Package (I-no. 583)

Concern:

Retrofitting

Model Year:

As of 2017

Note:

Ashtray and cigarette lighter instead of the oddments tray in the front center console.

Parts Info.:

991.044.901.40

Parts list:

991.553.141.02 DML

1x

Ashtray, complete

9P1.971.641.C

1x

Wire harness for center console

Work Procedure: 1

 Smoker package

Preparatory work:
1.1

Connect a battery charger.  Workshop Manual '2X00IN Battery trickle charging'

1.2

Remove center console trims at the sides and footwell outlet vents.  Workshop Manual
'681419 Removing and installing centre console trim'

1.3

Only for PDK: Remove selector knob.  Workshop Manual '370419 Removing and
installing knob'

1.4

Only for manual transmission: Remove shift-lever knob.  Workshop Manual '340419
Removing and installing shift-lever knob'

2016© Porsche Cars North America, Inc.

Tequipment

Apr 22, 2016
Page 1 of 5

6

911 (991)
6820

ENU

13/16

Installation and Conversion Instructions

1.5

Remove center console cover and selector lever cover.  Workshop Manual '681919
Removing and installing centre console cover'

1.6

Remove switch console.  Workshop Manual '962719 Removing and installing switch
console'

1.7

Remove front oddments tray.  Workshop Manual '681619 Removing and installing
oddments tray'

1.8

Remove center console (upper part).  Workshop Manual '68171901 Removing and
installing centre console (upper part)'

1.9

Remove rear oddments tray.  Workshop Manual '681619 Removing and installing
oddments tray'

1.10

Only for PDK: Remove selector support.  Workshop Manual '370819 Removing and
installing selector support'

1.11

Only for manual transmission: Remove gearshift bracket.  Workshop Manual '340819
Removing and installing gearshift bracket'

1.12

Remove center console (lower part).  Workshop Manual '68171900 Removing and
installing centre console (lower part)'

Information
The number of plug connections can vary, depending on equipment.
2

Convert electric wire harness for centre console.
2.1

Remove standard wire harness.
2.1.1

Disconnect plug connection for
interior sensor  Figure 2 -arrow-.

Figure 2

Apr 22, 2016
Page 2 of 5

Tequipment

2016© Porsche Cars North America, Inc.

Installation and Conversion Instructions
2.1.2

Release connector  Figure 3 -1and pull it off.

2.1.3

Pull off front clip  Figure 3 -3-.

2.1.4

Carefully pull out standard wire
harness at the clips  Figure 3 -2-.

911 (991)
13/16

ENU

6820

6

Information
Plug connections that are not required are
secured to the wire harness.
2.2
3

4

Install new wire harness for centre console.

Figure 3

Concluding work:
3.1

Install center console (lower part).  Workshop Manual '68171900 Removing and installing
centre console (lower part)'

3.2

Only for manual transmission: Install gearshift bracket.  Workshop Manual '340819
Removing and installing gearshift bracket'

3.3

Only for PDK: Install selector support.  Workshop Manual '370819 Removing and
installing selector support'

3.4

Install rear oddments tray.  Workshop Manual '681619 Removing and installing oddments
tray'

3.5

Install center console (upper part).  Workshop Manual '68171901 Removing and installing
centre console (upper part)'

3.6

Install front ashtray.  Workshop Manual '682019 Removing and installing front ashtray'

3.7

Install switch console.  Workshop Manual '962719 Removing and installing switch
console'

3.8

Install center console cover and selector lever cover.  Workshop Manual '681919
Removing and installing centre console cover'

3.9

Only for manual transmission: Install shift-lever knob.  Workshop Manual '340419
Removing and installing shift-lever knob'

3.10

Only for PDK: Install selector knob.  Workshop Manual '370419 Removing and installing
knob'

3.11

Install center console trims at the sides and footwell outlet vents.  Workshop Manual
'681419 Removing and installing centre console trim'

Code smoker package.

2016© Porsche Cars North America, Inc.

Tequipment

Apr 22, 2016
Page 3 of 5

6

911 (991)
6820

ENU

Installation and Conversion Instructions

13/16

NOTICE
Voltage drop
•

Risk of irreparable damage to control unit

•

Risk of damage to control unit

•

Fault entries in the control unit

•

Coding in the control unit is aborted

•

Malfunctions in control unit, even during programming



Switch off the ignition and remove the ignition key before disconnecting the control unit.



Ensure that the power supply is not interrupted during programming.



Connect a battery charger with a current rating of at least Nominal value 70 A to the vehicle
battery.

Information
The 9818 - PIWIS Tester II instructions take precedence since the description may be
different with later Tester releases.
The procedure described here has been structured in general terms; different text or additional information may be displayed.
4.1

Maintenance of vehicle data.
4.1.1

9818 - PIWIS Tester II must now be connected and the ignition switched on.

4.1.2

Select vehicle type. PIWIS Tester II Diagnostics starts.

4.1.3

Additional menu must be selected by pressing •F7“. Press •F11“ to confirm
the question “Create vehicle analysis log (VAL)?”.

4.1.4

Select the Maintenance of vehicle data function.
Press •F12“ until M numbers appears in the Value group column.

4.1.5

Select 583 – Smoker package in the Coding value column.
Touch the Installed cell – a tick appears behind the value 583 – Smoker
package.
Press •F8“ to save the value. The message Modified values have been
buffered appears.

4.1.6

A table containing the values to be changed appears.
Save the values by pressing •F8“.
Wait until the message Generation of vehicle data is complete..... appears.

4.1.7

Apr 22, 2016
Page 4 of 5

Press •F12“ to switch to Report management.

Tequipment

2016© Porsche Cars North America, Inc.

6

911 (991)

Installation and Conversion Instructions

13/16

ENU

6820

Open the log by pressing •F10“ and check that vehicle equipment Smoker
package – 583 has been entered. Close the log.

68203180:

4.1.8

Read out the fault memories of all systems, work through any existing faults
and erase the fault memories.  Workshop Manual '033500 Fault memory for
on-board diagnosis'

4.1.9

Switch off the ignition and disconnect 9818 - PIWIS Tester II.

4.2

Perform function test on cigarette lighters.

4.3

Disconnect the battery charger.  Workshop Manual '2X00IN Battery trickle charging'
Labor time: 188 TU

Installing smoker package

Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. If a particular condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your authorized Porsche Dealer for the latest information
about whether a particular technical bulletin applies to your vehicle. Part numbers listed in these bulletins are for reference only. Always check with your authorized Porsche dealer to verify the current and
correct part numbers. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS
Tester are the ones that must be followed.
© Porsche Cars North America, Inc.

Dealership
Distribution
Routing

Service Manager

_______

Shop Foreman

_______

Service Technician

________

_______

_______

_______

Asst. Manager

_______

Warranty Admin.

_______

Service Technician

________

_______

_______

_______

Dr. Ing. h.c. F. Porsche AG is the owner of numerous trademarks, both registered and unregistered, including without limitation the Porsche Crest®, Porsche®, Boxster®, Carrera®, Cayenne®,
Cayman®, Macan®, Panamera®, Speedster®, Spyder®, 918 Spyder®, Tiptronic®, VarioCam®, PCM®, PDK®, 911®, RS®, 4S®, FOUR, UNCOMPROMISED®, and the model numbers and the
distinctive shapes of the Porsche automobiles such as, the federally registered 911 and Boxster automobiles. The third party trademarks contained herein are the properties of their respective owners.
Porsche Cars North America, Inc. believes the specifications to be correct at the time of printing. Specifications, performance standards, standard equipment, options, and other elements shown are
subject to change without notice. Some options may be unavailable when a car is built. Some vehicles may be shown with non-U.S. equipment. The information contained herein is for internal authorized
Porsche dealer use only and cannot be copied or distributed. Porsche recommends seat belt usage and observance of traffic laws at all times.
Printed in the USA

2016© Porsche Cars North America, Inc.

Tequipment

Apr 22, 2016
Page 5 of 5