Loading...

NHTSA ID Number: 10197440

Manufacturer Communication Number: JSD-082118

TSB/Document Date: 2021-06-14


Summary

An electric control unit has improper programming.


4.1

3.8

The flat rate times include 0.1 hours of administrative cost per unit for the dealership.
The cost of up to 8.0 liters of CVT fluid can be claimed at maximum rate of $188.00 per vehicle as sublet type
“OF” under OpCodes JSD004 or JSD002.
If parts are not immediately available to replace the CVT valve body assembly on the customer’s vehicle, the
customer should be offered a loaner vehicle until parts become available, if possible. Damage to the vehicle’s
transmission could occur if the vehicle is driven with the updated software prior to replacing the valve body
assembly. A loaner vehicle or, alternative transportation, through the Toyota Rent-A-Car (TRAC) can be claimed
at a maximum rate of $35.00 per day as sublet type “RT” for a maximum of 2 days under OpCode JSD004 and
for a maximum of 1 day under OpCode JSD002.
If the remedy parts are not available due to a backorder situation, a loaner vehicle or, alternative transportation
through the Toyota Rent-A-Car (TRAC) can be claimed at maximum rate of $35.00 per day as sublet type “RT”
for a maximum of 60 days under OpCode JSD004 or JSD002.
o
o

Rentals greater than 4 days or $35.00 per day requires DSPM authorization as per the Toyota
Transportation Assistance Policy (TTAP).
Rental invoice MUST be attached to all rental claims. These claims may be subject to debit if rental
invoice is not attached.

© 2018 Toyota Motor Sales, USA

S p e c i a l S e r v i c e C a m p a i g n J S D - D - P a g e |8

Warranty Reimbursement Procedure (Continued…)
Claim Filing Process #3 (CVT assembly replacement required, vehicle is in-warranty)
Option #1 - DTC P2820 was present upon vehicle’s arrival at the dealership:
If the vehicle is in-warranty, and had DTC P2820 present upon the vehicle’s arrival at the dealership, follow the 2
steps below to file a warranty claim for replacing the CVT assembly.
Step 1: File OpCode JSD019 to close the campaign. Because the vehicle is still in-warranty, this OpCode pays
$0.00 and is only intended to close the campaign and to cause TIS to show that the campaign has been
completed.
Step 2: File a regular warranty claim for the cost of replacing the CVT assembly and updating the software (if
necessary). Use the applicable OpCodes listed in T-SB-0289-17 (Toyota vehicles) or S-SB-0002-18 (Scion
vehicles). Filing these OpCodes will not close-out the campaign. Therefore, the OpCode in Step 1
must be filed to close the campaign.
Option #2 - DTC P2820 was present after the solenoid valve inspection was performed:
If the vehicle is in-warranty, and did not have DTC P2820 present upon arrival at the dealership, but DTC P2820
was present after performing the solenoid valve inspection, follow the 2 steps below to file a warranty claim for
replacing the CVT assembly.
Step 1: File one of the two OpCodes below for the cost of performing the software update, if necessary, and for
performing the solenoid valve inspection.
Opcode

JSD021

JSD020


Description
Perform software update
+
Perform solenoid valve inspection
+
DTC P2820 was present after performing the solenoid valve
inspection. CVT assembly replacement is required. Follow all
instructions on this page.
Software update not required
(vehicle already had latest software calibration)
+
Perform solenoid valve inspection
+
DTC P2820 was present after performing the solenoid valve
inspection. CVT assembly replacement is required. Follow all
instructions on this page.

Flat Rate Hours

1.0

0.7

The flat rate times include 0.1 hours of administrative cost per unit for the dealership.
If local traffic conditions prevent the dealer from performing the solenoid valve inspection when the customer
arrives, the customer may be placed in a loaner vehicle or, alternative transportation, through the Toyota RentA-Car (TRAC) for a maximum of 1 day. The cost of this loaner vehicle can be claimed at a maximum rate of
$35.00 per day as sublet type “RT” under OpCodes JSD021 or JSD020.
The RO for replacing the CVT assembly is required to be attached to the JSD warranty claim (OpCodes JSD021
or JSD020).
o

Rental invoice MUST be attached to all rental claims. These claims may be subject to debit if
rental invoice is not attached.

Step 2: File a regular warranty claim for the cost of replacing the CVT assembly. Use the applicable OpCode listed
in T-SB-0289-17 (Toyota vehicles) or S-SB-0002-18 (Scion vehicles). Filing this OpCode will not closeout the campaign. Therefore, one of the OpCodes in Step 1 must be filed to close the campaign.
Claim Filing Process #4 (CVT assembly replacement required, vehicle is out-of-warranty)
The DSPM who approved the out-of-warranty CVT assembly replacement will provide your dealership with a special
OpCode for the cost of replacing an out-of-warranty vehicle’s CVT assembly.

S p e c i a l S e r v i c e C a m p a i g n J S D - D - P a g e |9

Claim Filing Accuracy and Correction Requests
It is the dealer’s responsibility to file claims correctly for this Special Service Campaign. This claim filing information
is used by Toyota for various government reporting activities; therefore, claim filing accuracy is crucial. If it has been
identified that a claim has been filed using an incorrect opcode or a claim has been filed for an incorrect VIN, refer to
Warranty Procedure Bulletin PRO17-03 to correct the claim.
Customer Reimbursement
Reimbursement consideration instructions will be included in the owner letter.
Media Contacts
It is imperative that all media contacts (local and national) receive a consistent message. In this regard, all media
contacts must be directed to Tania Saldana (859) 815-9968 in Toyota Corporate Communications. Please do not
provide this number to customers. Please provide this contact only to media.
Customer Contacts
Customers who receive the owner letter may contact your dealership with questions regarding the letter and/or the
Special Service Campaign. Please welcome them to your dealership and answer any questions that they may have.
A Q&A is provided to assure a consistent message is communicated.
Customers with additional questions or concerns are asked to please contact the Toyota Customer Experience Center
(1-888-270-9371) - Monday through Friday, 7:00 am to 7:00 pm, Saturday 7:00 am to 4:30 pm Central Time.
Campaign Designation Decoder

H

0

A

Year Campaign is Launched

Repair Phase

Current Campaign Letter
for this year

B = 2011
C = 2012
D = 2013
E = 2014
F = 2015
G = 2016
H = 2017
Etc...

0 = Remedy
1 = Interim (Remedy not yet
available)
will change to
when the Remedy is available
(May use other characters in
unique cases)

1st Campaign = A
2nd Campaign = B
3rd Campaign = C
4th Campaign = D
5th Campaign = E
27th Campaign = 1
28th Campaign = 2
Etc...

Examples:
C1B = Launched in 2012, Interim Phase, 2nd Campaign Launched in 2012
E0A = Launched in 2014, Remedy Phase, 1st Campaign Launched in 2014
H0A = Launched in 2017, Remedy Phase, 1st Campaign Launched in 2017.
Please review this entire package with your Service and Parts staff to familiarize them with the proper stepby-step procedures required to implement this Special Service Campaign.
Thank you for your cooperation.
TOYOTA MOTOR SALES, U.S.A., INC.

© 2018 Toyota Motor Sales, USA

Special Service Campaign JSD – Remedy Notice
Certain 2014 – 2017 Model Year Toyota Corolla Vehicles
Certain 2017 Model Year Toyota Corolla iM Vehicles
Certain 2016 Model Year Scion iM Vehicles
Continuously Variable Transaxle (CVT) Software Update
Frequently Asked Questions
Original Publication Date: August 2, 2018
Q1:
A1:

Q2:
A2:

What is the condition?
An Electronic Control Unit (ECU) in the subject vehicles has improper programming that could lead a
component in the Continuously Variable Transmission (CVT) to unnecessarily cycle and experience abnormal
wear. If this component becomes damaged, the Malfunction Indicator Lamp (MIL) may illuminate in the
instrument cluster and the vehicle could experience a reduction of speed. After reaching a pre-determined
gear ratio, the vehicle can be operated up to approximately 37 mph.
Q1a:
A1a:

What transmissions are affected?
The Continuously Variable Transmission (CVT) is affected. The CVT utilizes a continuous range of
gear ratios to control the application of the engine’s power-output to the drive wheels.

Q1b:
A1b:

Are there certain situations where this condition is more likely to occur?
This issue involves abnormal valve wear inside the CVT that could lead the control unit to detect a
mismatch of the CVT gear ratio (commanded vs. actual). The potential for gear ratio mismatch is
highest at lower vehicle speeds or during acceleration from a stop.

Are there any symptoms that this condition exists?
If the condition exists, the malfunction indicator lamp, shown below, may illuminate in the instrument cluster
and the vehicle could experience a reduction of speed. After reaching a pre-determined gear ratio, the vehicle
can be operated up to approximately 37 mph.

Malfunction Indicator Lamp

FAQ Page 1 of 3
© 2018 Toyota Motor Sales, USA

Q3:
A3:

What is Toyota going to do?
Any authorized Toyota dealer will inspect the CVT control software and, if necessary, perform an update for
that software at NO CHARGE. After inspecting the software and, if necessary, performing the software update,
the CVT solenoid valve controlling the gear ratio in the CVT will be inspected* and, if necessary, the CVT
valve body assembly will be replaced at NO CHARGE. A portion of the CVT solenoid valve inspection process
requires the dealer technician to test drive the vehicle for a certain distance and at certain speeds.
In the unlikely event that the vehicle is exhibiting the condition (i.e., DTC P2820 is present) before receiving
this remedy, any authorized Toyota dealer will replace the CVT assembly at NO CHARGE.
NOTE: Toyota expects a majority of vehicles WILL NOT require CVT valve body assembly replacement. If
parts are not immediately available to replace the CVT valve body assembly on the customer’s vehicle, the
customer should be offered a loaner vehicle until parts become available, if possible. Damage to the vehicle’s
transmission could occur if the vehicle is driven with the updated software prior to replacing the valve body
assembly.
*: Some vehicles may be exhibiting certain powertrain malfunctions unrelated to the condition covered by this
Special Service Campaign that may interfere with the dealer’s ability to perform the solenoid valve inspection.
These powertrain malfunctions MUST be diagnosed and repaired prior to performing this Special Service
Campaign. Resolution of existing powertrain malfunctions are not covered as part of this Special Service
Campaign and should be diagnosed and repaired under warranty if still covered. If the vehicle is not covered
by warranty, the customer is responsible for the cost of diagnosis and repair.

Q4:
A4:

Is Special Service Campaign JSD related to Toyota’s previous Special Service Campaign J0D?
ToyotaeBay logo previously announced Special Service Campaign J0D which involved performing a software update to
the CVT control software to address the condition in Q1, above. Following the completion of the software
update in Special Service Campaign J0D, Toyota dealers received reports from some customers stating that
the vehicle experienced harsh shifting and/or abnormal engine RPM between shifts. These issues occurred
close to the completion date of the campaign and/or within relatively low mileage from the completion of the
campaign remedy, prompting ToyotaeBay logo to suspend Special Service Campaign J0D. Toyota has now identified
the cause of these issues and has developed a new remedy. Special Service Campaign JSD, which replaces
Special Service Campaign J0D, applies this new remedy. Owners of all vehicles previously involved in Special
Service Campaign J0D, including those who have previously completed Special Service Campaign J0D, are
requested to visit an authorized Toyota dealer to have Special Service Campaign JSD performed.
Q4a:
A4a:

What if I had Special Service Campaign J0D performed on my vehicle?
If your vehicle has Special Service Campaign J0D completed, we request that you visit an authorized
Toyota dealership to have Special Service Campaign JSD performed. All owners who previously had
Special Service Campaign J0D completed on their vehicle will receive an owner notification letter for
Special Service Campaign JSD, requesting them to visit an authorized ToyotaeBay logo dealer to have Special
Service Campaign JSD completed.

Q4b:

If I already had J0D performed on my vehicle, why is it necessary for my vehicle to have this
Special Service Campaign performed?
The remedy in this Special Service Campaign (JSD) is an updated version of previous Special
Service Campaign J0D and involves an additional inspection step and, if necessary, an additional
repair. Even if you already had Special Service Campaign J0D completed on your vehicle, it is
necessary to have this Special Service Campaign (JSD) completed as well.

A4b:

FAQ Page 2 of 3
© 2018 Toyota Motor Sales, USA

Q5:
A5:

Which and how many vehicles are covered by this Special Service Campaign?
There are approximately 1,300,800 vehicles covered by this Special Service Campaign.

Model Name
Toyota Corolla
Toyota Corolla iM
ScioneBay logo iM
Q5a:
A5a:
Q5b:
A5b:

Q6:
A6:

Model Year
2014 – 2017
2017
2016

Approximate UIO
1,263,300
19,700
17,800

Production Period
Late April 2013 – Late July 2017
Mid-March 2016 – Mid-June 2017
Early February 2015 – Early August 2016

Are there any other LexuseBay logo/Toyota/ScioneBay logo vehicles covered by this Special Service Campaign
in the U.S.?
No, there are no other LexuseBay logo/Toyota/ScioneBay logo vehicles covered by this Special Service Campaign.
Are Model Year 2018 vehicles equipped with the same CVT involved in Special Service
Campaign JSD?
Model Year 2018 Corolla and Corolla iM vehicles are not involved in Special Service Campaign JSD.
Model Year 2018 Corolla and Corolla iM vehicles were produced with the updated software in the
ECU, preventing the component within the CVT from unnecessarily cycling and causing abnormal
wear.

How long will the repair take?
Inspecting the software, performing the software update if necessary, and performing the CVT solenoid valve
inspection will take approximately one hour. In limited cases, should the results of the CVT solenoid valve
inspection determine that the CVT valve body assembly needs to be replaced, the repair will take an additional
three and one half hours.
In the unlikely event that your vehicle has experienced the condition before receiving this repair and requires
replacement of the CVT assembly, the total repair time will be seven hours for Toyota Corolla vehicles and
approximately nine hours for Toyota Corolla iM and ScioneBay logo iM vehicles.
Note: Your dealer may provide you with a loaner vehicle depending on which repair mentioned above is
necessary for your vehicle.

Q7:
A7:

What if I previously paid for repairs related to this Special Service Campaign (JSD)?
When Toyota sends owner notifications, reimbursement consideration instructions will be provided in the
owner letter.

Q8:
A8:

How does Toyota obtain my mailing information?
Toyota uses an industry provider who works with each state’s Department of Motor Vehicles (DMV) to receive
registration or title information, based upon the DMV records. Please make sure your registration or title
information is correct.

Q9:
A9:

What if I have additional questions or concerns?
If you have additional questions or concerns, please contact the Toyota Customer Experience Center at 1888-270-9371 Monday through Friday, 7:00 am to 7:00 pm, Saturday 7:00 am to 4:30 pm Central Time.

FAQ Page 3 of 3
© 2018 Toyota Motor Sales, USA

TOYOTA
Certain 2014 – 2017 Model Year Toyota Corolla Vehicles
Certain 2017 Model Year Toyota Corolla iM Vehicles
Certain 2016 Model Year Scion iM Vehicles
Continuously Variable Transaxle (CVT) Software Update
Special Service Campaign (Remedy Notice)
[VIN]

E

Dear Toyota Customer:

At Toyota, we are dedicated to providing vehicles of outstanding quality and value. As part of our continuing efforts to
provide superior customer satisfaction, Toyota is announcing a Special Service Campaign, which includes your
vehicle.

PL

You received this notice because our records, which are based primarily on state registration and title data, indicate
that you are the current owner. Please contact your authorized Toyota dealer to make an appointment to have this
Special Service Campaign performed. Please note that, even if your authorized dealer recently applied a software
update for your Continuously Variable Transmission, your vehicle may still be involved in this campaign.
What is the condition?
An Electronic Control Unit (ECU) in the subject vehicles has improper programming that could lead a component in
the Continuously Variable Transmission (CVT) to unnecessarily cycle and experience abnormal wear. If this
component becomes damaged, the Malfunction Indicator Lamp (MIL) may illuminate in the instrument cluster and the
vehicle could experience a reduction of speed. After reaching a pre-determined gear ratio, the vehicle can be operated
up to approximately 37 mph.

M

What will Toyota do?
Any authorized Toyota dealer will inspect the CVT control software and, if necessary, perform an update for that
software at NO CHARGE. After inspecting the software and, if necessary, performing the software update, the CVT
solenoid valve controlling the gear ratio in the CVT will be inspected and, if necessary, the CVT valve body assembly
will be replaced at NO CHARGE. A portion of the CVT solenoid valve inspection process requires the dealer technician
to test drive the vehicle for a certain distance and at certain speeds. Additionally, in the unlikely event that your vehicle
has experienced the condition before receiving this repair, any authorized Toyota dealer will replace the CVT assembly
at NO CHARGE.

SA

What should you do?

Before you are inconvenienced by this condition, any authorized Toyota dealer will perform this Special Service
Campaign on your vehicle at NO CHARGE.
Please contact your authorized Toyota dealer to make an appointment to have this Special Service Campaign
performed. Inspecting the software, performing the software update if necessary, and performing the CVT
solenoid valve inspection will take approximately one hour. In limited cases, should the results of the CVT
solenoid valve inspection determine that the CVT valve body assembly needs to be replaced, the repair will
take an additional three and one half hours.
In the unlikely event that your vehicle has experienced the condition before receiving this repair and requires
replacement of the CVT assembly, the total repair time will be seven hours for Toyota Corolla vehicles and
approximately nine hours for Toyota Corolla iM and ScioneBay logo iM vehicles.
Note: Your dealer may provide you with a loaner vehicle depending on which repair mentioned above is
necessary for your vehicle.

What if you have other questions?

Your local Toyota dealer will be more than happy to answer any of your questions.
If you require further assistance, you may contact the Toyota Customer Experience Center at 1-888-270-9371
Monday through Friday, 7:00 am to 7:00 pm, Saturday 7:00 am to 4:30 pm Central Time.

If you would like to update your vehicle ownership or contact information, you may do so by registering at
www.toyota.com/owners. You will need your full 17-digit Vehicle Identification Number (VIN) to input the new
information.
If you are a vehicle lessor, please assist us by forwarding this notice to the lessee.

PL

E

What if you live in California and don’t have this Special Service Campaign performed?
The state of California requires the completion of Safety Recalls / Service Campaigns on emission related parts prior
to vehicle registration renewal. In addition, the State requires that every vehicle must pass an emission test (SMOG
Check) every two years and before it is sold. Without the completion of this NO CHARGE Special Service Campaign
the California Air Resources Board (CARB) will not allow your vehicle to be registered. State of California Regulations
require Toyota to provide the Department of Motor Vehicles with a record of all vehicles that have not had the Special
Service Campaign completed.
Your Toyota dealer will provide you with a Vehicle Emissions Recall Proof of Correction Form after the campaign has
been completed. Please ensure you retain this form, because the DMV may require that you supply proof that the
campaign has been completed during your vehicle registration renewal process.
What if you have previously paid for repairs to your vehicle for this specific condition?
If you have previously paid for repair to your vehicle for this specific condition prior to receiving this letter, please mail
a copy of your repair order, proof-of-payment and ownership information to the following address for reimbursement
consideration:

M

Toyota Customer Experience Center - TSR
Toyota Motor Sales, USA, Inc.
c/o Toyota Motor North America, Inc.
P O Box 259001 – SSC/CSP Reimbursements
Plano, Texas 75025-9001

Please refer to the attached Reimbursement Checklist for required documentation details.

SA

We have sent this notice in the interest of your continued satisfaction with our products, and we sincerely regret any
inconvenience this condition may have caused you.
Thank you for driving a ToyotaeBay logo.
Sincerely,

TOYOTA MOTOR SALES, U.S.A., INC.

TOYOTA
Toyota Motor Sales, USA, Inc.
6565 Headquarters Drive
Plano, TX 75024
(469) 292-4000

CUSTOMER CONTACT & VEHICLE DISCLOSURE FORM
This form is not applicable for TCUV units.

This vehicle is involved in a Special Service Campaign. At this time, remedy parts are not available and the remedy
has NOT been performed. I understand that the vehicle will need to be returned to an authorized Toyota dealer to
have the remedy performed at NO CHARGE when the remedy is available.
Customer Signature
Toyota recommends that you register with the ToyotaeBay logo Owners Community at http://www.toyota.com/owners/ and
regularly check recall applicability using www.toyota.com/recall or www.safercar.gov. You will need to input your 17digit Vehicle Identification Number (VIN).
VIN

Campaign Code

Model

Model Year

Customer Information
Customer Name

Customer Email

Customer Address

Home Phone #
Mobile Phone #
Date

Please provide this information so that Toyota or your dealer can notify you when the remedy becomes
available. This information will only be used for campaign communications. If you’d like to update your
preferred contact information in the future, visit www.toyota.com/ownersupdate or contact us at 1-888270-9371.
Dealer Information
Dealer Name/Address

Dealer Code
Dealer Phone Number
Dealer Staff Name
Dealer Staff Signature

© 2018 Toyota Motor Sales, USA – Version 2b

12

SaleBestseller No. 1
Autel Scanner MaxiCOM MK900BT, 2026 MK900-BT V2.0 Bidirectional Diagnostic Tool, 8in Up of MK900 MX900 MK808S MK808BT MX808S MK808Z, 3000+ Active Tests, 40+ Service, CAN-FD&DOIP, All System, FCA 11 OS
  • 💯【Conta.ct us for Support Directly】If you met any...
  • 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
  • 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
  • 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
  • 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
SaleBestseller No. 2
Autel Professional OBD2 Scanner AL319 Code Reader, Enhanced Check and Reset Engine Fault Code, Live Data, Freeze Frame, CAN Car Diagnostic Scan Tools for All OBDII Vehicles After 1996, 2026 Upgraded
  • 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
  • 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
  • 【FOR END USER & DIYERS】 This error code reader AL319 is...
  • 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
  • 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...

If the PDF is very large, it may not load in the preview below.

Download PDF [2.47 MB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: JSD-082118

Replacement Service Bulletin Number:

MFR Communication Date: 2018-08-28

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



Sale
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
108 Reviews
THINKCAR Bidirectional OBD2 Scanner Diagnostic Tool 689BT - All System Scan Tool with Bluetooth 5.0, 3000+ Active Tests,ECU Coding, 34+ Services, FCA, CAN-FD and DoIP, Wireless Update
  • [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
  • Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
  • Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
  • 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
  • Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Sale
XTOOL D7S Bidirectional Scan Tool, 2026 AI-Assisted OBD2 Scanner Diagnostic Tool with FCA AutoAuth, All System Car Scanner, 39+ Resets, ECU C0ding, PMI, Upgrade of D7, Crankshaft Relearn, CAN FD/DoIP
  • Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCAeBay logo Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
  • 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCAeBay logo AutoAuth: Now supports FCAeBay logo SGW module for ChryslereBay logo, for JeepeBay logo, for DodgeeBay logo (2018+), for FiateBay logo (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for FordeBay logo, for LincolneBay logo, and for MazdaeBay logo ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
  • 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
  • Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMWeBay logo, for Benz and offline for BENZ, for MIT, along with PMI functions for FordeBay logo, for MazdaeBay logo, and for LincolneBay logo. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
  • OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Sale
2026 BOSSCOMM IF745 Scanner Diagnostic Tool, Check Engine Code Reader with 6 Resets, ABS Bleeder/Oil/EPB/SAS/Throttle/Battery, Scanner Diagnostic Tool for Vehicles, Lifetime Free Update, Auto VIN
  • 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
  • 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
  • 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
  • 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.​
  • 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.

This product presentation was made with AAWP plugin.

Share to...