2019

e-tron
Audi Pre-Delivery Inspection
Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi-approved battery charger to replenish the high voltage battery during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided
Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS
Diagnosis for using GFF for PDI function tests
 It is advised to start ODIS with the vehicle turned on and in ready mode to enable all 5F Test Plans in GFF
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle

Vehicle Preparation

Interior

 Check Elsa for open campaigns and updates

 Check operation of window, lock, and seat controls*

 Perform any open campaigns*

 Move front passenger seat belt retainer to highest position
while sitting against the b-pillar

 Perform diagnostic work*

 Inspect mirrors for proper operation*

Exterior

 Check rear view mirror operation*

 Check all key buttons and features*

 Verify operation of all interior lights

 Check all doors for proper power closing*

 Check heated steering wheel operation (if equipped)

 Inspect exterior for damage, dings, dents and surface
scratches

 Verify operation of heated/ventilated and massaging seats
(front/rear) (if equipped)*
 Verify operation of manual folding 2nd row

Lighting and Windshield

 Verify proper operation of climate control*

 Test exterior lighting functions

 Inspect operation of all power outlets*

 Test front washers (and headlight washers)*

 Check panoramic sunroof and sunshade operation*

 Install wiper blades

 Verify operation of rear side sunshade operation

Underhood Inspection

 Verify operation of front Passenger Occupant Detection
System

 Remove protective packing and inspect charging components

Settings

 Verify tool kit is installed securely in storage compartment

 Verify operation of MMI® touch screens, upper and lower

 Fill windshield washer fluid

 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*

 Check all fluid levels and top off if necessary

 Verify and set language and measurement units*
Trunk Inspection
 Verify trunk is operational
 Verify operation of emergency release handle.
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
Effective 3-14-2019-US
Version 1.3

 Home > Settings > General > Measurement Units >
Consumption (electric motor) to mi/kWh, and check to
ensure all other units are set to US specs
 Verify Speech Dialog System is operating*
 Set “Music volume while parking” to medium*
PRE-DELIVERY INSPECTION (PDI) | 1

2019

e-tron
Audi Pre-Delivery Inspection
Settings (continued)

Driving Performance (continued)

 Set dealership location in navigation*

 Check steering/tire alignment

 Turn off Manual Speed Warning (if equipped)*

 Check for squeaks, rattles and wind noise
 Calibrate rear view mirror*

Media / Radio / SAT

 Verify quality of radio reception in FM/SiriusXM® bands

 Verify operation of aux. input (if equipped)
 Verify operation of CD/DVD player (if equipped)

Driver Assistance

 Insert SD card and test function of all slots

 Verify all cruise control functions

 Program the presets to local stations

 Verify cruise control/ACC (if equipped), which includes the
following:

 Verify HD Radio is turned “off”*

 Adaptive Cruise Assist

Audi connect® (USA ONLY)

 Turn Assist

 Turn on the Wi-Fi® hotspot (if equipped)*

 Intersection Assistant

 Check Wi-Fi® hotspot visibility. No data available at PDI due
to dealer demo mode (if equipped)*

 Traffic Jam Assist
 Predictive Efficiency Assist

 Enable satellite map for navigation (if equipped)*

 Active lane assist with emergency assistant
On-Hoist Inspection

 Traffic sign recognition

 Check underside of vehicle for fluid leaks and loose components

 Verify Audi side assist functionality Pre sense® rear (if
equipped)

 Check steering, boots, brake system, hoses, tires and wheels
for damage

 Verify operation of night vision camera (if equipped)

 Inspect wheel bolts for proper torque*
 Install wheel locks (if equipped)
 Install wheel bolt covers and center caps as supplied*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*

 Verify operation of parking system*
 Verify all vehicle Head-up display functionality (if equipped)*
 Verify operation of High-beam assist
 Activate NAV and follow directions back to dealership
Post-Road Test Inspection

Driving Performance
 Check horn operation

 Interrogate fault memory and upload diagnostic log to GFF
Paperless Server

 Verify hold and release of electronic parking brake

 Check service interval and verify correct interval is displayed

 Verify electric motor performance and acceleration*

 Ensure the yellow tire pressure tag is installed on the steering wheel

 Verify regen operation, including steering wheel paddles
 Test drive vehicle applying brakes several times*
 Check adaptive air suspension in all positions

 Apply 30 Day Inventory Maintenance Sticker**
 Install showroom trickle charger to ensure the 12V battery
remains charged at all times**

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.

Technician Signature

Effective 3-14-2019-US
Version 1.3

Last 8 of VIN

Completion Date

PRE-DELIVERY INSPECTION (PDI) | 2