Classification:

Reference:

BR21-002

Date:

NTB21-030

April 15, 2021

VOLUNTARY SERVICE CAMPAIGN
ABS/VDC REPROGRAMMING
CAMPAIGN ID #:
APPLIED VEHICLES:

P1A01
2021 Rogue (T33)

Check Service COMM or Dealer Business Systems (DBS)
National Service History to confirm campaign eligibility.

INTRODUCTION
Nissan is conducting this voluntary service campaign on certain specific model year 2021
Rogue models, to inspect, and if applicable, reprogram the ABS/VDC control unit. This
service will be performed at no charge to the customer for parts or labor.

IDENTIFICATION NUMBER
Nissan has assigned identification number P1A01 to this campaign. This number must
appear on all communication and documentation of any nature dealing with this campaign.
DEALER RESPONSIBILITY
Dealers are to repair vehicles falling within range of this campaign that enter the service
department. This includes vehicles purchased from private parties, vehicles presented by
transient (tourists) owners, and vehicles in a dealer’s inventory.

Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.

1/24

SERVICE PROCEDURE

IMPORTANT: Before starting, make sure:


ASIST on the C-III plus has been synchronized (updated) to the current date.



All C-III plus software updates (if any) have been installed.



Connect a battery maintainer or smart charger set to reflash mode or a
similar setting. If the vehicle battery voltage drops below 12.0V or rises
above 15.5V during reprogramming, the ABS/VDC control unit may be
damaged.



Be sure to turn off all vehicle electrical loads.
If a vehicle electrical load remains on, the ABS/VDC control
unit may be damaged.



Be sure to connect the AC Adapter.
If the C-III plus battery voltage drops during reprogramming, the
process will be interrupted and the ABS/VDC control unit may be
damaged.



Turn off all external Bluetooth® devices (e.g., cell phones, printers, etc.)
within range of the C-III plus and the VI. If Bluetooth® signal waves are
within range of the C-III plus or VI during reprogramming,
reprogramming may be interrupted and the ABS/VDC control unit may
be damaged.

1.

Connect a battery maintainer/smart charger to the vehicle.

2.

Turn on the ignition by pressing the ignition button 1 time WITHOUT depressing the
brake pedal.

3.

Verify all electrical loads are turned off.

4.

Connect the VI to the vehicle.

5.

Start C-III plus.

2/24

NTB21-030

6.

Wait for the VI to be recognized.


7.

The serial number will display when the VI is recognized.

Select Re/programming, Configuration.

The VI is
recognized

Figure 1

3/24

NTB21-030

8.

Check the box to confirm the precaution instructions have been read, and then select
Next.
NOTE: Use the arrows (if needed) to view and read all the precautions.

Figure 2

9.

Select Automatic Selection(VIN).

Figure 3
4/24

NTB21-030

10.

Allow the C-III plus to perform automatic VIN selection.

Figure 4

11.

Confirm the VIN or Chassis # is correct, and then select Confirm.

XXXXXXXXXXXXXXX

Figure 5

5/24

NTB21-030

12.

Allow the System call to be performed.

Figure 6

13.

Confirm the VIN is correct for the vehicle, and then select Confirm.

XXXXXXXXXXXXXXXXXX

Figure 7
6/24

NTB21-030

14.

Select ABS.

Figure 8

15.

Select Reprogramming.

Figure 9

7/24

NTB21-030

16.

Confirm the current Part Number and write it on the repair order.



If it matches one of the part numbers in Table A, continue to step 17 on page 9.
If it does not match one of the part numbers in Table A, reprogramming is not
needed. Close C-III plus and skip to CLAIMS INFORMATION on the last page.

XXXXXXXXXXXXXXX

XXXXX

XXXXXXXXXXXXXXX

Figure 10

Table A
MODEL

YEAR

CURRENT PART NUMBER: 47855-

Rogue

2021

6RR7A, 6RR7B,
6RR8A, 6RR8B, 6RR8E, 6RR8F
6RR9E, 6RR9F
6RW3A, 6RW3B
6RW4A, 6RW4B
6RW8C, 6RW8D
6RW9C, 6RW9D

8/24

NTB21-030

17.

Select Save.

XXXXXXXXXXXXXXX

XXXXX

XXXXXXXXXXXXXXX

Figure 11
18.

Check the box to confirm the precaution instructions have been read, and then select
Next.
NOTE: Use the arrows (if needed) to view and read all the precautions.

Figure 12

9/24

NTB21-030

19.

Read the Current Part Number and Part Number After Repro/programming. They
should be different (Figure 13).

XXXXX
XXXXX

XXXXXXXXXXXX

XXXXXXXXXXXX

Figure 13

20.

Select Next.

XXXXX
XXXXX

XXXXXXXXXXXX

XXXXXXXXXXXX

Figure 14

10/24

NTB21-030

21.

Confirm the battery charger is on and the battery voltage is between 12V-15.5V, and
then select Next.

Verify battery
voltage is between
12V-15.5V

Figure 15

22.

Confirm all Judgment items are OK, and then select Start.

Figure 16

11/24

NTB21-030

23.

Select USA/CANADA Dealers from the drop down menu, and then select OK.

Figure 17

24.

If the Script Error message in Figure 18 is shown, Select Yes.

Figure 18

12/24