L624A.10.15

To:
Subject:
Date:

Official After Sales Network
Software Update Of Headlight Alignment Adjustment Control Unit (AFS)
02/20/2015

Pages

16

Subject
Software update of headlight alignment adjustment control
unit (AFS).
Model
All Lamborghini Huracán 2015 From VIN FLA00163 to
FLA02206
Warning: some vehicles included in this VIN range may
not be involved, so check carefully on the Lamborghini
WEB Portal (at the section named VIN Info) if the cars in
your workshop or in your dealer stock are involved before
performing any other operation.
Information to the field
As a result of continuous product monitoring, Automobili
Lamborghini Spa has found that on some vehicles the high
beam warning light sporadically may flash.
Field solution
Update the software that manage AFS control unit
Warranty Claim data
The warranty reimbursement request for this rework action
will be managed by the following standard Warranty
Claim procedures.
Campaign Code:
Campaign Des.:
Cost code:
Component code:
Trouble code:
Labor code:
Labor Time:

L624-A.10.15
AFS software update
50
CCA1015
220
CCA1015100
0,3h

Workshop instructions

The instructions contained in this bulletin are based on
ODIS Service diagnosis software updated to release 2.2.3
and database Lamborghini 19.63 (see information bulletin
BI.16.14)

Preliminary operations:
1. Make sure to be recently synchronized with Mirrorserver by checking the Last Sync date under:
http://mirrorserver/welcome
or under:
http://IP_address/welcome
if you didn’t yet set up the mirrorserver IP alias

Remember to fill all data in the section “Service and Recall Campaign” in the Warranty booklet of the vehicle as
shown below.

Rev.01

IMPORTANT
Make sure the last synchronization has been done
after the 16th february 2015.

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

1/16

L624A.10.15

To:
Subject:
Date:

Official After Sales Network
Software Update Of Headlight Alignment Adjustment Control Unit (AFS)
02/20/2015

Pages

16
3. Please connect the VAS5054 interface to the vehicle’s OBD plug and to the diagnostic laptop.
Turn the ignition ON

Update procedure:

4. Start the ODIS Service double clicking on the related icon on the desktop of the diagnosis laptop.

2. Please connect a battery charger to the recharge
points available in the front luggage compartment,
as shown in picture.

5. Scroll down the right side vertical bar. Click on
“OK” to hide the general information window.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

2/16

L624A.10.15

To:
Subject:
Date:

Official After Sales Network
Software Update Of Headlight Alignment Adjustment Control Unit (AFS)
02/20/2015

Pages

16

6. Select “Start diagnosis”.

8. Click “Yes”

Make sure that ODIS can detect the vehicle
connection status and the key ON.
Click “cancel” to each eventual Login to
group systems.

9. Skip the Login window by clicking “Cancel”

7. Check the vehicle identification on the window
“Basic vehicle characteristics”.
Select the Variant in the related menu
Deselect the checkbox “Using guided fault finding”
Click “Adopt”

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

3/16

L624A.10.15

To:
Subject:
Date:

Official After Sales Network
Software Update Of Headlight Alignment Adjustment Control Unit (AFS)
02/20/2015

Pages

16

10. Al the end of start-up procedure (see status in the
progress bar bottom right), move on the ODIS tab
“Special functions” now available.
L624A1015

13. Confirm that the inserted code is correct clicking
on “Yes”.
11. Select “SVM – Direct input: SVM code for
problem related update” by clicking the related
row with the mouse.
Click “Perform test…” to execute the SVM function
L624A1015

14. Click on “Done/Continue” to start the data acquisition from all the vehicle’s ECUs.

12. Insert in the upper box with the cursor the code
L624A1015
Click “Adopt”

Rev.01

IMPORTANT
Connect always a battery charger during the SVM
function

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

4/16

L624A.10.15

To:
Subject:
Date:

Official After Sales Network
Software Update Of Headlight Alignment Adjustment Control Unit (AFS)
02/20/2015

Pages

16

15. Wait until the data acquisition from all control
modules is completed.

17. The communication is then established with the
central server.
At the end of communication you receive following feedback:
“-software to be update has been detected (on 1
control unit).”
Click “Done/Continue”.

16. For the online authentication a valid GeKo account is necessary.
Be sure that your internet connection is working
properly.
Click on “Done/Continue” to access the Login
window.
Insert your GeKo user name in the field “Login”
and the pin 1324 + current 6 digit code displayed
on your GeKo token in the field Password.
Then confirm clicking on “Adopt”.

18. AFS System Software Update

The example in the figure below refer to software part number and version of the Headlight
regulation AFS control unit Software.
4T0907357A; 0003

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

5/16

L624A.10.15

To:
Subject:
Date:

Official After Sales Network
Software Update Of Headlight Alignment Adjustment Control Unit (AFS)
02/20/2015

Pages

16

Click “Yes” to check the availability of the updated software on Your Mirrorserver.

21. Once the update programming has been completed
successfully a feedback as in the picture below is
displayed.
19. Verify the new software data on the AFS system
ecu and click “Yes” to update.

Click “Done/Continue”.
If the update programming has not been completed or has been unsuccessful:
-

turn the ignition OFF;

-

wait 1 minute before turning the ignition
ON again;

-

if offered by the program: select “Repeat”
to retry the update programming, otherwise repeat the procedure from step 11.

IMPORTANT
Do not disconnect hardware interface from OBD
plug and do not switch ignition OFF during the
software update!
20. Wait until the update programming of the Headlight regulation AFS system ECU is completed.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

6/16

L624A.10.15

To:
Subject:
Date:

Official After Sales Network
Software Update Of Headlight Alignment Adjustment Control Unit (AFS)
02/20/2015

Pages

16

22. In the following an ignition OFF – ON cycle is
necessary to restart the ECU.
Press “Done/Continue” to continue.

25. Complete the SVM function
Press “Done/Continue”.

23. Switch the ignition OFF.
Press “Done/Continue”.

26. SVM can be completed after data acquisition from
all ECUs.
Click “Done/Continue”.

24. Switch the ignition ON.
Press “Done/Continue”.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

7/16

L624A.10.15

To:
Subject:
Date:

Official After Sales Network
Software Update Of Headlight Alignment Adjustment Control Unit (AFS)
02/20/2015

Pages

16

27. Wait until the data acquisition from all the control
modules is completed.

30. Al the end of the coding update a feedback is displayed as in the below figure.
Click “Done/Continue”.

28. New coding has been detected.
Click “Done/Continue”.

31. In the following an ignition OFF – ON cycle is
necessary to restart the ECU.
Press “Done/Continue” to continue.

29. New coding has been calculated on the 55 – Headlight Regulation AFS system and must be written
in the control unit.
Click “Yes”.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

8/16

L624A.10.15

To:
Subject:
Date:

Official After Sales Network
Software Update Of Headlight Alignment Adjustment Control Unit (AFS)
02/20/2015

Pages

16

32. Switch the ignition OFF.
Press “Done/Continue”.

35. SVM can be completed after data acquisition from
all ECUs.
Click “Done/Continue”.

33. Switch the ignition ON.
Press “Done/Continue”.
36. Wait until the data acquisition from all the control
modules is completed.