NHTSA ID Number: 10191349
Manufacturer Communication Number: L83XA1414
TSB/Document Date: 2021-05-03
Summary
Drivability enhancement.
Official After Sales Network
Drivability enhancement
11th/07/2014
Pages
26
9. Click “Yes”
12. Select “SVM – Direct input: SVM code for
problem related update” by clicking the related
row with the mouse.
Click “Perform test…” to execute the SVM function
10. Skip the Login window by clicking “Cancel”
13. Insert in the upper box with the cursor the code
L83XA0414
Click “Apply”
L83XA0414
11. Al the end of start-up procedure (see status in the
progress bar bottom right), move on the ODIS tab
“Special functions” now available.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini
S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
5/26
L83XA.04.14
To:
Subject:
Date:
Official After Sales Network
Drivability enhancement
11th/07/2014
Pages
26
14. Confirm that the inserted code is correct clicking
on “Yes”.
L83XA0414
17. For the online authentication a valid GeKo account is necessary.
15. Click on “Done/Continue” to start the data acquisition from all the vehicle’s ECUs.
IMPORTANT
Connect always a battery charger during the SVM
function
Be sure that your internet connection is working
properly.
Click on “Done/Continue” to access the Login
window.
Insert your GeKo user name in the field “Login”
and the pin 1324 + current 6 digit code displayed
on your GeKo token in the field Password.
Then confirm clicking on “Apply”.
16. Wait until the data acquisition from all control
modules is completed.
18. The communication is then established with the
central server.
At the end of communication you receive following feedback:
“-software to be update has been detected (on 3
control units).”
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
6/26
L83XA.04.14
To:
Subject:
Date:
Official After Sales Network
Drivability enhancement
11th/07/2014
Pages
26
Click “Done/Continue”.
21. Engine Software Update.
19. All the data to be updated on all the interested
control units have to be determined.
Click “Done/Continue”.
Depending on the market and according to car’s
equipment, new engine software part number and
version will be different.
The example in the figure below refer to software
version for MY13 Coupe’:
470909049AJ; 1412
Click “Done/Continue”
Software Update
to
continue.Gearbox
20. By chosing the 2nd option, all the interested control units will be updated without interruption.
Click “Done/Continue”.
22. Gearbox Software Update.
The example in the figure below refer to software part number and version of the Gearbox.
470927256B; 0937
Click “Done/Continue” to continue.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
7/26
L83XA.04.14
To:
Subject:
Date:
Official After Sales Network
Drivability enhancement
11th/07/2014
Pages
26
23. Instrument cluster Software Update.
The example in the figure below refer to software part number and version of the Instrument
Cluster (Kombi) Software.
25. Click “Done/Continue” to update without interruption all electronics control units interested in
Software Update.
470920900E; 0060
Click “Done/Continue” to continue.
26. Wait until the update programming of the engine
ECU is completed.
24. Click “2” to select the Software update without interruption on all electronics control units interested in.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
8/26
L83XA.04.14
To:
Subject:
Date:
Official After Sales Network
Drivability enhancement
11th/07/2014
Pages
26
27. Once the update programming has been completed
successfully a feedback as in the picture below is
displayed.
29. Switch the ignition OFF.
Press “Done/Continue.
Click “Done/Continue”.
If the update programming has not been completed or has been unsuccessful:
- turn the ignition OFF;
- wait 1 minute before turning the ignition ON
again;
- if offered by the program: select “Repeat” to retry the update programming, otherwise repeat
the procedure from step 11.
30. Wait 1 minute before switching the ignition
back ON again.
Then press “Done/Continue” to continue.
28. In the following an ignition OFF – ON cycle is
necessary to restart both the ECU.
Press “Done/Continue” to continue.
31. Wait until the update programming of the gearbox
ECU is completed.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
9/26
L83XA.04.14
To:
Subject:
Date:
Official After Sales Network
Drivability enhancement
11th/07/2014
Pages
26
32. Once the update programming has been completed
successfully a feedback as in the picture below is
displayed.
Click “Done/Continue”.
If the update programming has not been completed or has been unsuccessful:
-
turn the ignition OFF;
-
wait 1 minute before turning the ignition
ON again;
-
if offered by the program: select “Repeat”
to retry the update programming, otherwise repeat the procedure from step 28;
35. Once the update programming has been completed
successfully a feedback as in the picture below is
displayed.
Click “Done/Continue”.
If the update programming has not been completed or has been unsuccessful:
-
turn the ignition OFF;
-
wait 1 minute before turning the ignition
ON again;
-
if offered by the program: select “Repeat”
to retry the update programming, otherwise repeat the procedure from step 33.
33. Wait 1 minute before switching the ignition
back ON again.
Then press “Done/Continue” to continue.
34. Wait until the update programming of the Instrument Cluster (Kombi) ECU is completed.
Rev.01
36. In the following an ignition OFF – ON cycle is
necessary to restart both the ECU.
Press “Done/Continue” to continue.
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
10/26
L83XA.04.14
To:
Subject:
Date:
Official After Sales Network
Drivability enhancement
11th/07/2014
Pages
26
Click “Done/Continue” to continue with the coding.
37. Switch the ignition OFF.
Press “Done/Continue”.
40. New coding has been calculated on control unit 17
– Instrument Cluster and it is necessary to write in
the ECU.
Click “Yes”.
38. Switch the ignition ON.
Press “Done/Continue”.
41. At the end of the coding update a feedback is displayed as indicated in the below figure.
Click “Done/Continue”.
39. New coding has been detected.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
11/26
L83XA.04.14
To:
Subject:
Date:
Official After Sales Network
Drivability enhancement
11th/07/2014
Pages
26
42. In the following an ignition OFF – ON cycle is
necessary to restart both the ECUs.
44. Switch the ignition ON.
Press “Done/Continue”.
Press “Done/Continue” to continue.
45. A calibration has been detected.
43. Switch the ignition OFF.
Click “Done/Continue”.
Press “Done/Continue”.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
12/26
L83XA.04.14
To:
Subject:
Date:
Official After Sales Network
Drivability enhancement
11th/07/2014
Pages
26
46. Wait few seconds in order to allow the download
of all calibration data.
Click “Done/Continue”.
48. IMPORTANT REMARK
47. Continue with the calibration of the control unit
17 – Instrument Cluster.
It is possible that the first time the update of the
parameters 29 and 30 fails, with the following error in the figure:
Click “Done/Continue” to continue with the calibration of each parameter.
There are 41 parameters to be calibrated.
If the calibration update has not been completed or
has been unsuccessful:
- turn the ignition OFF;
- wait 1 minute before turning the ignition ON
again;
- if offered by the program: select “Repeat” to retry the update programming, otherwise repeat
the procedure from step 46.
In that case
- turn the ignition OFF;
- wait 1 minute before turning the ignition ON
again;
Select “Repeat”.
In the case there was again the screen with the error of
missing communication shown in figure,
Select “Continue” (for each parameter not yet updated)
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
13/26
L83XA.04.14
To:
Subject:
Date:
Official After Sales Network
Drivability enhancement
11th/07/2014
Pages
26
49. Select “1” to repeat the calibration of those parameters starting from step 47
52. Wait until the data acquisition from all the control
modules is completed.
50. Click “Done/Continue” to end the SVM function.
53. Once the data report has been sent to the servers a
feedback as in the picture below is displayed.
The software update of engine, gearbox and instrument cluster ECUs has been completed successfully and all the information have been stored
in the system.
Press “Done/Continue” to exit the program.
51. SVM can be completed after data acquisition from
all ECUs.
Click “Done/Continue”.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
14/26
L83XA.04.14
To:
Subject:
Date:
Official After Sales Network
Drivability enhancement
11th/07/2014
Pages
26
54. Go back to the tab “Special functions” and select
“Erase fault memory – overall system” to clear all
the faults stored because of the recent software
update.
55. Execute the program “Erase fault memory – overall system” clicking on “Perform test…”
56. Go back to the Control Unit tab (block diagram or
list view), to select the Transmission Electronics
ECU GET_02 and its Guided Function.
57. Select the function “02 – ECU setup after replacement / software programming” in order to initialize the gearbox ECU.
Click “Execute” to run the test.
58. Click “Done/Continue”.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
15/26
L83XA.04.14
To:
Subject:
Date:
Official After Sales Network
Drivability enhancement
11th/07/2014
Pages
26
61. Click “Done/Continue”.
59. Select “NO”
62. Click “Done/Continue” in order to execute the
gear adaption.
60. The status of the gear adaptation is evaluated.
Click “Done/Continue”.
63. Gear adaptation.
Confirm clicking on “Yes”.
Rev.01
The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]
16/26
L83XA.04.14
To:
Subject:
Date:
Official After Sales Network
Drivability enhancement
11th/07/2014
Pages
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: L83XA1414
Replacement Service Bulletin Number:
MFR Communication Date: 2014-07-11
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN:AUTOMATIC TRANSMISSION
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.