L83XA.11.14

To:
Subject:
Date:

Official After Sales Network
Kombi s.w. update.
01st/08/2014

Pages

15

Subject
Kombi s.w. update.
Model
All Lamborghini Aventador Coupé and Roadster MY 14
starting from VIN ELA02757.
Warning: some vehicles included in this VIN range may
not be involved, so check carefully on the Lamborghini
WEB Portal (at the section named VIN Info) if the cars in
your workshop or in your dealer stock are involved before
performing any other operation.
Information to the field
As a result of continuous product monitoring, Automobili
Lamborghini Spa has introduced a new software that manages instrument cluster to enhance the display graphics.
Field solution
Update software that manage instrument cluster.
Warranty Claim data
The warranty reimbursement request for this rework action
will be managed by the following standard Warranty
Claim procedures.
Campaign Code:
Campaign Des.:
Cost code:
Component code:
Trouble code:
Labor code:
Labor Time:

L83X-A.11.14
Kombi s.w. update.
50
CCA1114
220
CC1114100
2h

Remember to fill all data in the section “Service and Recall Campaign” in the Warranty booklet of the vehicle as
shown below.

Rev.01

Workshop instructions

The instructions contained in this bulletin are based on
ODIS Service diagnosis software updated to release 2.1.1
and database Lamborghini 19.60 (see information bulletin
BI.07.14)
Preliminary operations:
1. Make sure to be recently synchronized with Mirrorserver by checking the Last Sync date under:
http://mirrorserver/welcome
or under:
http://IP_address/welcome
if you didn’t yet set up the mirrorserver IP alias

IMPORTANT
Make sure the last synchronization has been done
after the 02nd may 2014.

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

1/15

L83XA.11.14

To:
Subject:
Date:

Official After Sales Network
Kombi s.w. update.
01st/08/2014

Pages

15
Update procedure:
2. Please connect a battery charger to the recharge
points available in the engine bonnet, as shown in
picture.

Before starting the Kombi software installation
procedure, it is necessary to take note of the
current service interval status from the specific
menu on the instrument cluster.

3. Please connect the VAS5054 interface to the vehicle’s OBD plug and to the diagnostic laptop.
Turn the ignition ON

In this example it is 3400 km and 200 days.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

2/15

L83XA.11.14

To:
Subject:
Date:

Official After Sales Network
Kombi s.w. update.
01st/08/2014

Pages

15

4. Start the ODIS Service double clicking on the related icon on the desktop of the diagnosis laptop.

5. Select Offboard Diagnostic Information System
Service clicking on it.

8. Check the vehicle identification on the window
“Basic vehicle characteristics”.
Select the Variant in the related menu
6. Scroll down the right side vertical bar. Click on
“OK” to hide the general information window.

Deselect the checkbox “Using guided fault finding”
Click “Apply”

7. Select “Start diagnosis”.

Make sure that ODIS can detect the vehicle
connection status and the key ON.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

3/15

L83XA.11.14

To:
Subject:
Date:

Official After Sales Network
Kombi s.w. update.
01st/08/2014

Pages

15

9. Click “Yes”

12. Select “SVM – Direct input: SVM code for
problem related update” by clicking the related
row with the mouse.
Click “Perform test…” to execute the SVM function

10. Skip the Login window by clicking “Cancel”

13. Insert in the upper box with the cursor the code
L83XA1114
Click “Apply”

LB83XA1114

11. Al the end of start-up procedure (see status in the
progress bar bottom right), move on the ODIS tab
“Special functions” now available.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

4/15

L83XA.11.14

To:
Subject:
Date:

Official After Sales Network
Kombi s.w. update.
01st/08/2014

Pages

15

14. Confirm that the inserted code is correct clicking
on “Yes”.

L83XA1114

17. For the online authentication a valid GeKo account is necessary.
15. Click on “Done/Continue” to start the data acquisition from all the vehicle’s ECUs.

IMPORTANT
Connect always a battery charger during the SVM
function

Be sure that your internet connection is working
properly.
Click on “Done/Continue” to access the Login
window.
Insert your GeKo user name in the field “Login”
and the pin 1324 + current 6 digit code displayed
on your GeKo token in the field Password.
Then confirm clicking on “Apply”.

16. Wait until the data acquisition from all control
modules is completed.

18. The communication is then established with the
central server.
At the end of communication you receive following feedback:
“-software to be update has been detected (on 1
control unit).”

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

5/15

L83XA.11.14

To:
Subject:
Date:

Official After Sales Network
Kombi s.w. update.
01st/08/2014

Pages

15

Click “Done/Continue”.

19. All the data to be updated on all the interested
control units have to be determined.

21. Wait until the update programming of the Instrument Cluster (Kombi) ECU is completed.

Click “Done/Continue”.

20. Instrument cluster Software Update.

The example in the figure below refer to software part number and version of the Instrument
Cluster (Kombi) Software.
470920900E; 0062

22. Once the update programming has been completed
successfully a feedback as in the picture below is
displayed.
Click “Done/Continue”.
If the update programming has not been completed or has been unsuccessful:
-

turn the ignition OFF;

-

wait 1 minute before turning the ignition
ON again;

-

if offered by the program: select “Repeat”
to retry the update programming, otherwise repeat the procedure from step 11.

Click “Done/Continue” to continue.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

6/15

L83XA.11.14

To:
Subject:
Date:

Official After Sales Network
Kombi s.w. update.
01st/08/2014

Pages

15
25. Switch the ignition ON.
Press “Done/Continue”.

23. In the following an ignition OFF – ON cycle is
necessary to restart both the ECU.
Press “Done/Continue” to continue.

26. New coding has been detected.
Click “Done/Continue” to continue with the coding.

24. Switch the ignition OFF.
Press “Done/Continue”.
27. New coding has been calculated on control unit 17
– Instrument Cluster and it is necessary to write in
the ECU.
Click “Yes”.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

7/15

L83XA.11.14

To:
Subject:
Date:

Official After Sales Network
Kombi s.w. update.
01st/08/2014

Pages

15

28. At the end of the coding update a feedback is displayed as indicated in the below figure.

30. Switch the ignition OFF.
Press “Done/Continue”.

Click “Done/Continue”.

29. In the following an ignition OFF – ON cycle is
necessary to restart both the ECUs.

31. Switch the ignition ON.
Press “Done/Continue”.

Press “Done/Continue” to continue.

Rev.01

The information and procedures published below are strictly confidential and intended exclusively for authorized operators and individuals. All copyrights are the property of Automobili Lamborghini S.p.A based on copyright law. The company reserves the right to make
updates and modifications. The reprinting, reproduction, forwarding to unauthorized people and/or to third parties and partial or entire
translation thereof are prohibited without written authorization from Automobili Lamborghini S.p.A.
doc. nr: L/V6_M06 Rev.[02]

8/15

L83XA.11.14

To:
Subject:
Date:

Official After Sales Network
Kombi s.w. update.
01st/08/2014