NHTSA ID Number: 10190207
Manufacturer Communication Number: NTB17-097B
TSB/Document Date: 2021-04-13
Summary
2016-2018 ROGUE AND 2017-2018 ROGUE SPORT; WHISTLE NOISE TRANSMITTED TO CALL RECIPIENT WHEN USING BLUETOOTH HANDS-FREE PHONE SYSTEM This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
13.
Fold the two (2) wires back along the
harness.
Figure 15
Taped to
harness
14. Tape the wires to the harness as shown
in Figure 16.
Figure 16
8/15
NTB17-097B
40 pin TCU harness
connector
15.
Plug the 40 pin TCU harness connector
back into the TCU.
Confirm that all connections are
secure.
TCU
Figure 17
16.
Reinstall the TCU with two screws.
TCU
Two screws
Figure 18
17.
Re-install the glove box assembly.
Group 1: Stop here. Procedure complete.
Group 2: Skip steps 13-17 and proceed to step 18 on the next page.
9/15
NTB17-097B
Group 2 Only
18.
Using a terminal tool (J-48817-1, blade
#07A), carefully remove the two
existing black ground wires shown in
Figure 19.
2 black ground wires; terminals 29
and 28 locations shown in Figure 20,
from harness side.
NOTE: If needed, refer to ASIST / TechMate / Tech-Mate Tools & Equipment /
Users Guides / Harness Repair Kit
Users Guide / TH Family (126, 129) for
procedure to remove pins
Figure 20
Black ground wires
Figure 19
Terminals 29 and 28
Press down on locking fingers (Figure 21) to release each terminal.
IMPORTANT: Locking fingers are fragile.
Locking fingers
Figure 21
10/15
NTB17-097B
Existing ground
wires
Figure 22 shows the existing ground
wires removed.
Figure 22
19.
Insert the two pins of the new subharness, from Parts Information, where
the black ground wires were just
removed from terminals 29 and 28.
It does not matter which wire is in
which cavity.
Refer to Figure 20 on previous page
for harness connector cavity
locations.
Two pins
New sub-harness
Figure 23
Side terminal retainer
20.
Install the side terminal retainer and
then the front terminal retainer.
Front terminal retainer
Figure 24
11/15
NTB17-097B
Fold original ground
wires to harness
21.
Fold the original ground wires and the
two (2) wires removed from the
harness connector in step 7 to the
harness as shown in Figure 25.
Figure 25
Taped to
harness
22.
Tape the wires from step 21 to the
harness. Figure 26.
Figure 26
40 pin TCU harness
connector
23.
TCU
Plug the 40 pin TCU harness connector
back into the TCU.
Confirm that all connections are
secure.
New sub-harness
Figure 27
12/15
NTB17-097B
24.
Reinstall the TCU with two screws.
Attach the eyelet of the new sub-harness to the upper TCU mounting screw.
TCU
Eyelet of the new
sub-harness
Two screws
New sub-harness
Figure 28
25.
Reinstall the glove box assembly.
13/15
NTB17-097B
PARTS INFORMATION
DESCRIPTION
PART NUMBER
QUANTITY
HARNESS SUB (Sub-harness)
24168-9TB1C
1
Red Solder Sleeve
24361-7990A
1
Figure 29 shows sub-harness.
HARNESS SUB
(Sub-harness)
Figure 29
CLAIMS INFORMATION
GROUP 1 *
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Solder Circuits 16 and 11 Together
24361-7990A
RX6GAA
ZE
32
0.5
PFP
OP CODE
SYM
DIA
FRT
RX5PAA
ZE
32
0.5
RX6HAA
ZE
32
0.6
* (See page 2 for group identification)
GROUP 2 *
DESCRIPTION
Install Sub-harness
Solder Circuits 16 and 11 Together
24168-9TB1C
* (See page 2 for group identification)
14/15
NTB17-097B
AMENDMENT HISTORY
PUBLISHED DATE
REFERENCE
DESCRIPTION
August 23, 2017
NTB17-097
Original bulletin published
August 29, 2018
NTB17-097A
Changes made throughout
March 12, 2021
NTB17-097B
Classification number updated
15/15
NTB17-097B
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB17-097B
Replacement Service Bulletin Number:
MFR Communication Date: 2021-03-12
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.