SERVICE BULLETIN
Release Date: March 9th, 2021

IND

Communication #: I-20-06-A/B/C
Model Year(s): 2014–2020

— Confidential and Proprietary —

VERSION: R01 (March 9th, 2021)
IMPORTANT STOP SALE NOTICE!
Stop selling affected vehicles immediately.
IMPORTANT
If you are working with a printed copy, please verify you have the most current version of this document.

SUBJECT: FREQUENCY INTERFERENCE
PURPOSE
Indian Motorcycle has determined that some 2014-2020 Full–Size (111 c.i. / 116 c.i.) and 2020 Challenger models sold
in Japan show compliance concerns due to operating range frequency of key fob, Vehicle Control Module (VCM) or
Wireless Control Module (WCM), and Tire Pressure Monitor System (TPMS). Mentioned devices operate in restricted
in Japan frequency of 433Hhz.
To address this, Indian Motorcycles has released this Service Bulletin instructing dealers to replace key fobs and the
VCM / WCM for devices which operate in 315Mhz frequency and are complainant with Japanese regulations. On
models equipped with TPMS system TPMS sensors needs to removed.

AFFECTED MODELS
VEHICLE IDENTIFICATION NUMBER
RANGE

MODEL YEAR

MODELS

2014–2020

Full–Size (111 c.i. / 116 c.i.)

2020

Challenger

Reference Unit Inquiry on the dealer website
or the Service Communications list on the
STOP site to lookup affected VINs.

C U S T O M E R N O T I F I C AT I O N
Dealers are required to review their sales records and make arrangements with customers for Bulletin completion. In
addition to consumer units, dealers are required to correct any affected units in their inventory. Indian Motorcycle will
be mailing a notification letter to consumers affected by this Bulletin.

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-20-06 (R01)

© 2021 Polaris Inc.

Page 1 of 14

WA R R A N T Y C L A I M PA R T S I N F O R M AT I O N
Bulletin parts are excluded from the standard RMA policy and cannot be returned. An Initial Recommended Order
Quantity has not been provided for this bulletin. Use Quantity Ordered to Date and the Open VIN List from the STOP
site to determine an order amount that’s right for your dealership. For more details, refer to University of Polaris
training course "Polaris Item Availability and Daily Ordering" and click on "Bulletin Ordering Training".
WCM AND KEY FOB REPLACEMENT (CHALLENGER)
Bulletin #

I-20-06-A

Claim Type

SB (Service Bulletin)

Labor Allowance

0.4 hours (24 minutes)

Part Number / Description

• 4019468 (QTY 1) Challenger Key Fob
• 2415840 (QTY 1) Challenger WCM

Parts Availability

Available to order

University of Polaris Video
Training Required

NO

VCM AND KEY FOB REPLACEMENT (FULL-SIZE 111 C.I. / 116 C.I.)
Bulletin #

I-20-06-B

Claim Type

SB (Service Bulletin)

Labor Allowance

0.5 hours (30 minutes)

Part Number / Description

2209265 (QTY 1) Kit

Parts Availability

Available to order

University of Polaris Video
Training Required

NO
STOP!

Safety Bulletin I-20-03, gear position sensor replacement, must be competed before proceeding with I-20-06-B.
Please check unit inquiry if the I-20-03 communication was completed.

TPMS REMOVAL (ONLY VEHICLES EQUIPPED WITH TPMS SENSORS)
Bulletin #

I-20-06-C

Claim Type

SB (Service Bulletin)

Labor Allowance

2.0 hours (120 minutes)

Part Number / Description

0000541 (QTY 1) Bulletin Misc Labor

Parts Availability

No parts required

University of Polaris Video
Training Required

NO

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-20-06 (R01)

© 2021 Polaris Inc.

Page 2 of 14

ACCESSORY LABOR
Polaris will cover labor for the removal and installation of accessories required to complete the bulletin work. Follow
the steps below to obtain reimbursement.
How to apply for accessory detachment cost:
1. Create a new warranty case as warranty type "Goodwill".
2. Fill out each necessary item. VIN, mileage, engine hours, repair date, labor time, etc.
3. Enter Indian Motorcycle I-20-06 "accessory Mounting and Dismounting" in the customer concern, probable cause,
and repair/correction fields, respectively.
4. Enter warranty fail codes 127/277/132.
5. Add part 0000541, quantity 1.
6. It attaches photo of the vehicle and the mounting accessory that can determine the labor required.
7. Save the warranty repairs you have created.
8. Send email to the Polaris Japan service that fill in the VIN and mileage, attach the same photo as in 6 and send it by
mail.
9. Polaris Japan Service will return the approval code.
10. Enter and submit the received approval code in the field Approved code for saved warranty repairs.

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-20-06 (R01)

© 2021 Polaris Inc.

Page 3 of 14

I N V E N T O R Y / S T O C K PA R T C L A I M S
Dealers should review their service parts inventory and ensure the following service parts are NOT used:
• 2415517 = Challenger WCM
• 4017761 = Challenger Key Fob
• 4017768 = Challenger Key Fob
• 4014121 = Full-Size Motorcycle Key Fob
• 4014111 = Full-Size Motorcycle Key Fob
• 2414229, 2414503, 4014110, 4015220, 4015234, 4016189 = Full-Size Motorcycle VCM
• 2412417 = Sensor, Tire Pressure
NOTICE
To remove these service parts from circulation, file a Part Stock claim as directed below.
Use the following process for filing a Part Stock warranty claim for any of the parts listed above.
1. Start a new Part Stock warranty claim.
2. Select Product Line: IND
3. Enter today’s date into the Date Failed and Date Repair information fields
4. Enter Indian Motorcycle® I-20-06 into the CONCERN field.
5. Enter Indian Motorcycle® I-20-06 into the CAUSE field.
6. Enter Removed From Inventory into the CORRECTION field.
7. Enter the part number and quantity.
8. Enter warranty fail codes: 127/501/132
9. Validate the parts.
10. Return stock parts to Polaris Japan.

COVERAGE PERIOD
Coverage will begin on March 09, 2021. This bulletin has no expiration date.

PA R T S R E T U R N / D I S P O S A L I N F O R M AT I O N
Under no circumstances shall the parts removed be re-used, sold, or re-purposed for another application. It is your
dealership / distributor’s responsibility to make sure every part replaced (related to this communication) is taken out
of circulation and disposed according to local electrical waste regulations.

FEEDBACK FORM
A feedback form has been created for the technician to provide Polaris with an overall
satisfaction rating for the instructions, provide comments on your experience or upload
pictures/video. This feedback form is viewable on a mobile device by scanning the QR code
or by clicking HERE if viewing this document electronically.

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-20-06 (R01)

© 2021 Polaris Inc.

Page 4 of 14

I-20-06-A - WCM AND KEY FOB
REPLACEMENT (CHALLENGER)
Reference the service manual below when performing
repair procedures.

4. Using a 6mm allen, remove the battery bracket
fastener w and slide the bracket out of its retention
feature.

• 2020–2021 Indian Challenger Service Manual 9850038.

TOOLS REQUIRED
• 6mm allen socket
• 10mm socket
• Ratchet
• Torque Wrench
• Electric Isolation Tape
• Dielectric Grease or Petroleum Jelly
• Digital Wrench Multi-link XP connector

5. Using a 10mm socket, disconnect the negative
battery cable from the battery.

P R E PA R AT I O N
Before proceeding with WCM and key fob replacement,
obtain the consumer pin number.

W C M R E M O VA L
NOTICE
Remove and install the SEAT by using the instructions
located in 2020–2021 Indian Challenger Service
Manual 9850038.

IMPORTANT
Position the cable out of the way to prevent accidental
contact with the battery terminal.
NOTICE
Electrical tape can be used to cover the negative
battery terminal and cable end to prevent a short from
occurring across the WCM.

1. Park motorcycle on flat level surface.

6. Remove the seat.

2. Ensure the bike is powered off.

7. Disconnect WCM e electrical connector.

3. Using a 6mm allen, remove the two chin fairing
fasteners q. Remove the chin fairing

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-20-06 (R01)

© 2021 Polaris Inc.

Page 5 of 14

8. Press down the bracket latch and slide WCM froward
to remove.

W C M I N S TA L L AT I O N
1. Install WCM into position and connect WCM
electrical connector e.

2. Connect the negative battery cable. Torque negative
terminal fastener to specification. Apply light film of
dielectric grease or petroleum jelly to the terminal.
TORQUE
Battery Terminal:
48 in-lbs (5 N·m)
3. Install battery bracket and fastener w. Make sure the
retention tab is fully engaged. Torque fastener to
specification.

TORQUE
Battery Bracket Fastener:
84 in-lbs (10 N·m)

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-20-06 (R01)

© 2021 Polaris Inc.

Page 6 of 14

4. Install chin faring and fasteners q. Make sure the
tabs are aligned on the bottom. Torque fasteners to
specification.

KEY FOB PROGRAMMING
Programming the key fob can only be done by the
dealer and must be done using Digital Wrench®. A
single key fob can be programmed to multiple
motorcycles. One motorcycle can have up to 4 key fobs
programmed to the WCM.
1. Connect the recommended BatteryMINDer® battery
charger to the motorcycle connector. The connector
is on the left side of the unit near the fuse box.

TORQUE
Chin Fairing Fastener:
36 in-lbs (4 N·m)
5. Install the seat. See 2020–2021 Indian Challenger
Service Manual 9850038.

2. Connect Digital Wrench® and turn power switch to
"ON" position. Do NOT start the engine.
3. In Digital Wrench®, select "Special Tests" (Red
Toolbox) , next select "#4: Key fob Maintenance”.

4. Select "Continue." Digital Wrench® will then read the
WCM information for key fob.

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-20-06 (R01)

© 2021 Polaris Inc.

Page 7 of 14

5. Locate the key fob ID (FID) located inside the key fob.

6. Add new key fob type in the 10 digit FID number
under "New Value" and then select "Write New”.

NOTICE
When adding additional key fobs, all current and
additional key fobs must be present.
7. Upload the service report record. Setup consumer
PIN to match the number the owner provided.
8. File a SB claim for I-20-06-A.
9. If the motorcycle is equipped with TPMS, proceed to
I-20-06-C instructions for TPMS removal.

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
I-20-06 (R01)

© 2021 Polaris Inc.

Page 8 of 14