NHTSA ID Number: 10187821
Manufacturer Communication Number: TSB_ENG228
TSB/Document Date: 2021-03-04
Summary
TECHNICAL SERVICE BULLETIN: 3.8L GDI MISFIRE DTC JUDGMENT LOGIC IMPROVEMENT - This bulletin provides the procedure to improve the logic of the Engine Control Module (ECM) on some 2020MY Telluride (ON) vehicles with 3.8 GDI ULEV engines, produced from January 9, 2019 through May 19, 2020, which may exhibit a cold start misfire with MIL ON for the misfire related DTC(s) listed below.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- MaxLife Technology prevents engine breakdown with 40% better...
- Includes seal conditioners to reduce oil consumption and oil...
- Added detergents reduce sludge, corrosion, rust and deposits...
- Advanced friction-fighting additives help maximize...
- Meets or exceeds all requirements of ILSAC GF-6A, API SP...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: TSB_ENG228
Replacement Service Bulletin Number:
MFR Communication Date: 2021-02-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
GROUP
ENG
MODEL
2020MY
Telluride (ON)
NUMBER
228
DATE
January 2021
TECHNICAL SERVICE BULLETIN
SUBJECT:
3.8L GDI MISFIRE DTC JUDGMENT LOGIC IMPROVEMENT
This bulletin provides the procedure to improve the logic of the Engine Control Module (ECM) on
some 2020MY Telluride (ON) vehicles with 3.8 GDI Atkinson ULEV engines, produced from
January 9, 2019 through May 19, 2020, which may exhibit a cold start misfire with MIL ON for
the misfire related DTC(s) listed below. To correct this concern, apply the improved logic to the
Engine system using the KDS ECU Upgrade function as described in this bulletin. For
confirmation that the latest reflash has been applied to a vehicle you are working on, verify the
ROM ID using the table on page 3 of this bulletin.
DTC Description:
P0300 – Random/Multiple Cylinder Misfire Detected
P0301, P0302, P0303, P0304, P0305, P0306 – Cylinder (1-6) Misfire Detected
NOTICE
A Vehicle Diagnosis Number (VDN) must be created with DTC(s) P0300-P0306, prior to
performing the ECM Logic Improvement. If a VDN is not created, Warranty claim
submission issues WILL occur.
Kia
Diagnostic System (KDS)
Printed TSB copy is for reference only; information may be updated at any time.
Always refer to KGIS for the latest information.
Circulate To:
X General Manager
X Service Advisors
X Technicians
X Service Manager
X Parts Manager
X Body Shop Manager Fleet Repair
Page 2 of 8
SUBJECT:
3.8 GDI MISFIRE DTC JUDGMENT LOGIC IMPROVEMENT
ECU Upgrade Procedure:
To correct this condition, the ECU should be reprogrammed using the KDS
download, as described in this bulletin.
Upgrade Event Name
518. ON 3.8GDI ATKINSON ULEV AT MISFIRE DTC JUDGMENT LOGIC IMPROVEMENT
NOTICE
•
•
•
•
•
•
•
•
Confirm a fully charged battery with 12.3 volts or higher is necessary or the use of
a fully charged jump starter box connected to the battery.
Ensure the KDS GDS is sufficiently charged at 60% or higher prior to reflash.
All ECU upgrades must be done with the ignition key in the ‘ON’ position unless
otherwise stated.
Be careful not to disconnect the VCI-II connected to the vehicle during the ECU
upgrade procedure.
DO NOT start the engine during ECU upgrade.
DO NOT turn the ignition key ‘OFF’ or interrupt the power supply during ECU
upgrade.
When the ECU upgrade is completed, turn the ignition ‘OFF’ and wait 10 seconds
before starting the engine.
ONLY use approved ECU upgrade software designated for the correct application.
IMPORTANT
It is recommended to ALWAYS check the Electronic Parts Catalog (EPC) to locate the
ECU Part Number respective to Auto/Manual Mode ROM IDs. DO NOT reference the
parts label affixed to the ECU.
NOTICE
Before attempting an ECU upgrade on any Kia model, make sure to first determine
whether the applicable model is equipped with an immobilizer
security system.
Failure to follow proper procedures may cause the PCM to become inoperative after
the upgrade and any claims associated with this repair may be subject to chargeback.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: ENG228 Telluride (ON) January 2021
Page 3 of 8
3.8 GDI MISFIRE DTC JUDGMENT LOGIC IMPROVEMENT
SUBJECT:
ROM ID INFORMATION TABLE:
Upgrade Event #518
Model
ON
(3.8GDI
Atkinson)
EM
ULEV
TM
IMMO
ECU P/No.
ROM ID
Previous
New
Yes
39122 3LNN0
ONLN8GMS_J0B
ONLN8GMS_J0C
ONLN8GMS_K0A
ONLN8GMS_K0B
No
39132 3LNN0
ONLN8GSS_J0B
ONLN8GSS_J0C
ONLN8GSS_K0A
ONLN8GSS_K0B
AT
To verify the vehicle is affected, be sure to check the Calibration Identification of the vehicle's ECM ROM
ID and reference the Information Table as necessary.
NOTICE
Prior to performing the ECU upgrade, be sure to check that the KDS is fully charged.
1.
Connect the VCI-II to the OBD-II
connector, located under the driver’s side
of the instrument panel.
NOTICE
The ECU upgrade function on
KDS operates wirelessly. It is not
necessary to perform the
upgrade via USB cable.
2.
With the ignition ON, turn ON the KDS
tablet. Select KDS from the home screen.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: ENG228 Telluride (ON) January 2021
Page 4 of 8
SUBJECT:
3.
3.8 GDI MISFIRE DTC JUDGMENT LOGIC IMPROVEMENT
Confirm communication with VCI (A) and
then configure the vehicle (B) using the
AUTO VIN (C) feature.
B
A
C
4.
Select ECU Upgrade.
5.
The KDS will check the server for recently
uploaded Events and then automatically
download Upgrade Event #518.
NOTICE
The vehicle must be identified in
Vehicle Selection to download
an Event for that vehicle.
6.
KDS
screenshot
shown
above
is
for
demonstration purposes only. Events shown in
screenshot are not applicable to this bulletin.
Select Auto Mode.
CAUTION
Do NOT attempt to perform a
Manual Mode upgrade UNLESS
Auto Mode fails. Always follow
the instructions given on the
KDS in either Auto or Manual
mode.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: ENG228 Telluride (ON) January 2021
Page 5 of 8
SUBJECT:
7.
3.8 GDI MISFIRE DTC JUDGMENT LOGIC IMPROVEMENT
Select the Engine system under the
System selection menu.
D
Touch ID Check (D) and confirm that the
latest update is available.
Select Upgrade Event #518 and select
Upgrade to continue.
8.
The ECU upgrade will begin and the
progress of the upgrade will appear on the
bar graph. Upgrade part (1/2) (E) will
download the upgrade event to the VCI-II.
Upgrade part (2/2) (F) will upgrade the
ECU.
CAUTION
E
F
Do not touch the system buttons
(like ‘Back’, ‘Home’, ‘etc.’) while
performing ECU Upgrade.
9.
If a “Communication Fail” screen appears,
verify that the VCI-II and KDS are
communicating properly. Touch OK and
restart the procedure from step 4.
NOTICE
If an error notice continues to
appear or if the upgrade cannot
be
performed,
DO
NOT
disconnect
the
KDS/VCI-II.
Contact GIT America Help Desk
at (888) 542-4371 or Techline.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: ENG228 Telluride (ON) January 2021
Page 6 of 8
SUBJECT:
3.8 GDI MISFIRE DTC JUDGMENT LOGIC IMPROVEMENT
10. When instructed on the KDS, turn the
ignition OFF for ten (10) seconds then
back on. Touch OK to continue.
11. Once the upgrade is complete, touch OK
to finalize the procedure.
12. When prompted, select YES to check for
Diagnostic Trouble Codes (DTC) and
erase any DTCs stored such as EPS,
ESC, and TPMS that may have been set
during the upgrade.
13. Start the engine to confirm proper
operation of the vehicle.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: ENG228 Telluride (ON) January 2021
Page 7 of 8
SUBJECT:
3.8 GDI MISFIRE DTC JUDGMENT LOGIC IMPROVEMENT
Manual Upgrade Procedure:
NOTICE
The manual upgrade should ONLY be performed if the automatic upgrade fails.
If the automatic upgrade fails, turn the ignition OFF for about 10 seconds then place it
back in the ON position to reset the control unit BEFORE performing manual upgrade.
See table below for Manual Mode passwords.
Manual Mode ECU Upgrade Passwords
Menu
Password
ON 3.8GDI ATKINSON ULEV AT -IMMO: 39132-3LNN0
ON 3.8GDI ATKINSON ULEV AT +IMMO/SMK: 39122-3LNN0
2230
3230
1.
Within the ECU Upgrade screen displayed, select Manual Mode.
2.
Select the Engine system under the System selection menu. Select Upgrade Event #518
and select Upgrade to continue.
3.
Select the appropriate control unit part number with reference to the ROM ID Information
Table on page 3, and select OK.
4.
Enter the appropriate password from the Manual Mode password table above and select
OK.
5.
The upgrade will begin and the progress of the upgrade will appear on the bar graph.
6.
When instructed on the KDS, turn the ignition OFF for ten (10) seconds then back on. Touch
OK to continue.
7.
Once the upgrade is complete, touch OK to finalize the procedure.
8.
When prompted, select YES to check for Diagnostic Trouble Codes (DTC) and erase any
DTCs stored such as EPS, ESC, and TPMS that may have been set during the upgrade.
9.
Start the engine to confirm proper operation of the vehicle.
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: ENG228 Telluride (ON) January 2021
Page 8 of 8
SUBJECT:
3.8 GDI MISFIRE DTC JUDGMENT LOGIC IMPROVEMENT
AFFECTED VEHICLE RANGE:
Model
Production Date Range
Telluride (ON)
January 9, 2019 through May 19, 2020
WARRANTY INFORMATION:
N Code: I3A C Code: ZZ3
Claim
Type
Causal P/N
Qty.
Repair
Description
Labor Op
Code
Op
Time
Replacement
P/N
Qty.
W
39122 3LNN0
0
ECM Logic Improvement
39102F01
0.3
M/H
N/A
0
Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information.
TSB: ENG228 Telluride (ON) January 2021
- OBD2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15+ reset service, bidirectional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth OBD2 scanner diagnostic tool ideal for DIY's and private car owners.
- Bidirectional Test for Quickly Locating Problems: The Bidirectional Scan tool allows you to send commands directly from your smartphone to your vehicle for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping DIY users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
- 15+ Maintenance Resets: The current version introduces 15+ popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us check compatibility.
- Wide Compatibility CANFD & FCA
Autoauth: Compatible with GM, Ford, Toyota, Chrysler, Honda, Mazda, Nissan, Mitsubishi, Hyundai, KIA with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us to confirm compatibility before purchase. - Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent Auto VIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time data. Data logging/reporting is available for playback and further analysis
- No Annual Fees & 2026 Upgraded CAN FD: Why pay $199/year or more for updates? The 2026 newest Kingbolen K7 obd2 scanner features have been upgraded to Lifetime Updates without subscription fees, saving you significant costs in the long run. K7 scan tool also adds the CAN FD protocol for the latest GM models (2019+), enabling faster data transfer, reducing the risk of undetected errors
- 2026 Newest Top-tier Car Scanner: Kingbolen K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Test, ECU Online/Offline Code, 31+ Resets, PMI for Ford, Lincoln, Mazda, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA AutoAuth
- OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with Auto Vin can do one-click to scan ECUs on most of vehicles, like pcm, ecm, eps, bcm, tpms, sas, a/c system... to read/clear code, view live data, freeze frame, read ecu info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
- Bidirectional Test/Active Test & ECU Code: Stop guessing and start fixing. Bidirectional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to save money and time on car repairs when performing complex maintenance and repair
- 31 Reset Functions: Avoid expensive dealership visits for simple services. Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional diagnostic scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Code, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. Note: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase
- WHY S608 STANDS OUT:2026 Kingbolen S608 is the only scanner <200 bucks that offers powerful active tests on Engine, ABS, SRS, and Transmission systems. Offers 9 resets,Covers 110+ global brands with a 6.2'' larger touchscreen
- KINGBOLEN'S NEW BIDIRECTIONAL SCAN TOOL: As the 2026 upgraded version of S600, our Newest S608 obd2 scanner has the powerful Bi-directional Control on Engine, ABS, SRS, and Transmission systems. It can send commands to the ECUs of actuators for functional tests and work status checks, such as ABS, fuel injectors, adjusting throttle, coolant pumps, EVAP test, fuel trim reset, etc. No more Guesswork. Quickly identify problem components without teardown, get fuss-free results in seconds.
- 【9 HOT RESET SERVICES CAR SCANNER】Tired of costly mechanic trips for common resets? The Kingbolen S608 obd2 scanner lets you do it yourself, even for beginners—quickly and effortlessly! It offers 9 hot reset functions: Oil/EPB Reset, ABS Bleeding, SAS Calibration, DPF Regeneration, Injector Coding, BMS Matching, Throttle Adaptation, Gear Learning. Stop paying mechanics for 5-minute jobs. Save hundreds per year! 🚗*Function vary from vehicle models. reach us to check compatibility firstly!
- 【4 SYSTEM DIAGNOSTIC TOOL + FULL OBDII FUNCTIONS】Kingbolen S608 is an OBDII scanner and 4 systems diagnostic tool made for home mechanics, DIYers, and professionals. You can access Engine, ABS, SRS, Transmission fault codes, track live data in graphs, and onboard DTC library lookup to find the right troubleshooting procedure, and diagnose with full 10 OBD2 test modes to fix most of emission issues. Give your aging cars routine maintenance to avoid costly repairs, a breakdown, or even a crash.
- 【NEW CAN FD, FCA/RENAULT SGW, 140+ BRANDS】Kingbolen S608 scanner for car supports 140+ vehicle brands, 100,000+ models, 28 languages and can be used worldwide. S608 stays up-to-date with modern vehicles, allows secure access to 2017+ FCA cars and 2015+ Renault cars (📢*Need to purchase an AutoAuth/Renault account by yourself), and supports the latest CAN-FD protocol for 2019+ GM/Chrysler, enabling 2X faster data transfer and more precise diagnostics. 🚗*Check compatibility before purchase.
This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API