NHTSA ID Number: 10187234
Manufacturer Communication Number: N202302720 01
TSB/Document Date: 2021-02-16
Summary
Special Coverage. Certain vehicles may have a condition where the vehicle may overheat and enter a reduced power mode when driven on a track at sustained high speeds in high ambient temperatures. Dealers are to install an updated radiator package and, for automatic transmission vehicles, updated shift-point calibration software. The repairs will be made at no charge to the customer. The customer must provide evidence of an overheating condition in the form of one of the following: Diagnostic Trouble Code, photos, videos, documented complaints of overheating prior to the special coverage, or a track receipt. The dealer should make a copy of any customer evidence provided and file with the warranty claim.
GLOBAL SAFETY FIELD INVESTIGATIONS
DCS5661
URGENT - DISTRIBUTE IMMEDIATELY
Date:
January 28, 2021
Subject: REVISION – N202302720 01 – Special Coverage
On Track Performance Engine Overheating
Revised Parts Section and Accepted Evidence Expanded
Models: 2015-2016 Chevrolet Corvette
Equipped with Manual Transmission (RPO MEK)
2015-2018 Chevrolet Corvette
Equipped with Automatic Transmission (RPO M5U)
To:
All General Motors Dealers
This bulletin has been revised to remove the intake manifold part numbers from
the part tables and expand the acceptable evidence to include prior documented
complaints of overheating or a track receipt. Please discard all copies of
N202302720.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS
Special Coverage Adjustment
N202302720 On Track Performance Engine Overheating
Release Date:
Revision Description:
Attention:
Make
Chevrolet
Chevrolet
January 2021
Revision:
01
This bulletin has been revised to remove the intake manifold part numbers from the part
tables and expand the acceptable evidence to include prior documented complaints of
overheating or a track receipt. Please discard all copies of N202302720.
This Special Coverage can be seen in the Applicable Warranties section in Investigate Vehicle History
(IVH).
Model
Corvette Z06
Corvette Z06
Model Year
From
To
2015
2016
2015
2018
RPO
MEK
M5U
Description
Manual Transmission
Automatic Transmission
Involved vehicles are identified on the Applicable Warranties section in GM Global Warranty Management system. This
site should always be checked to confirm vehicle involvement prior to beginning any required inspections and/or repairs.
Condition
Special
Coverage
Adjustment
Certain 2015-2018 model year Chevrolet Corvette Z06 vehicles may have a condition where the vehicle
may overheat and enter a reduced power mode when driven on a track at sustained high speeds in high
ambient temperatures.
This special coverage covers the condition described above for a period of 7 years or 72,000 miles
(116,000 km), whichever occurs first, from the date the vehicle was originally placed in service,
regardless of ownership.
For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after
December 17, 2020, are covered by this special coverage and must be submitted using the labor
operation codes provided with this bulletin. Claims with repair orders prior to December 17, 2020, must
be submitted to the Service Contract provider.
Correction
Vehicle owners or lessees who paid for repairs referenced in this Special Coverage (“Customers”) are
eligible for reimbursement of their reasonable and customary expenses in accordance with the
procedures specified below. The conditional right to reimbursement is provided by GM solely in the
interest of customer satisfaction and is personal to Customers. Customers may not assign and GM
does not consent to any assignment of any Customer’s right to submit reimbursement claims, or to
receive reimbursement, or any other rights granted by this Special Coverage to any third party,
including but not limited to service contract providers, and this Special Coverage is not intended to
and does not confer any third party beneficiary, subrogation or contribution rights, or any other rights
to reimbursement, against GM, whether in law, equity or otherwise, on any third parties.
Dealers are to install an updated radiator package and, for automatic transmission vehicles, updated
shift-point calibration software. The repairs will be made at no charge to the customer. The customer
must provide evidence of an overheating condition in the form of one of the following: Diagnostic
Trouble Code, photos, videos, documented complaints of overheating prior to the special coverage, or
a track receipt. The dealer should make a copy of any customer evidence provided and file with the
warranty claim.
Copyright 2021 General Motors. All Rights Reserved.
Page 1 of 8
Special Coverage Adjustment
N202302720 On Track Performance Engine Overheating
Parts
Automatic Transmission
Quantity
1
1
As Req.
2
As Req.
1
1
Part Name
Radiator
Radiator Upper Air Baffle
PAG oil
Part No.
84524653
84872137
88901445 US
88900060 CA
Obtain locally in
compliance with
GM material
specification
9986181
12346290 US
10953464 CA
Obtain locally in
compliance with
GM material
specification
9986100
12356150 US
10953485 CA
Obtain locally in
compliance with
GM material
specification
9985751 or
9986319
10313109
13579648
Manual Transmission
Quantity
4
4
2
1
1
1
1
1
1
1
4
1
1
1
3
1
2
As Req.
Part Name
MEK, CLAMP ASM, RAD OTLT HOSE
MEK, CLAMP, RAD OTLT HOSE
Radiator Hose Tee
Hose, Radiator Outlet
Hose, Radiator Outlet
Hose ASM, Aux Rad Inlet
Hose, Radiator Inlet
Hose, Radiator Inlet
Pipe ASM
Aux Cooler ASM
Aux Cooler Mounting Studs
Aux Radiator Air Baffle
Radiator Air Baffle
Radiator Air Seal Lower
Radiator Air Seal Retainer
A/C Seal
A/C Seal
PAG oil
Part No.
11547371
11601882
84254392
84254395
84254396
84169802
84254393
84254394
84180422
84082802
11548498
84023053
23342026
23264636
11589290
10313109
13579648
88901445 US
88900060 CA
Obtain locally in
compliance with
GM material
specification
9986181
Page 2 of 8
Special Coverage Adjustment
N202302720 On Track Performance Engine Overheating
2
As Req.
12346290 US
10953464 CA
Obtain locally in
compliance with
GM material
specification
9986100
12356150 US
10953485 CA
Obtain locally in
compliance with
GM material
specification
9985751 or
9986319
Note: Use the vehicle identification number (VIN) and the GM Electronic Parts Catalog (EPC) to determine which parts to
order.
It is estimated that there are only 5% of involved vehicles that will require parts being replaced. Due to the small number
of vehicles anticipated that will need this repair and the limited initial parts availability, dealers are encouraged
not to order these parts for use as shelf stock.
Reminder: Parts may be removed from Retail Inventory Management (RIM). Dealers should review the affected parts
to confirm RIM managed status. Parts may have quantity limiters in effect.
Warranty Information
Labor
Operation
9900755
9900424*
Description
Radiator Replacement (17-18 MY Automatic Transmission only)
Radiator Replacement (15-16 MY Automatic Transmission only)
Add: TCM Reprogramming
Or
Add: TCM Reprogramming Same Cal Block
Auxiliary Radiator Installation (Manual Transmission only)
Customer Reimbursement Approved
- For USA and Canada dealers only
- For Export dealers only
Customer Reimbursement Denied – For USA dealers only
9900756
9900757
9900758
Labor
Time
2.5
2.5
0.7
0.2
4.5
N/A
0.2
N/A
Trans.
Type
ZREG
ZREG
Net
Item
N/A
N/A
ZREG
ZREG
N/A
**
ZREG
***
Important: The customer must provide evidence of an overheating condition in the form of one of the following:
•
Diagnostic Trouble Code, photos, videos, documented complaints of overheating prior to the
special coverage, or a track receipt.
The dealer should make a copy of any customer evidence provided and file with the warranty claim.
Important: * To avoid warranty transaction rejections, carefully read and follow the instructions below:
•
The Warranty Claim Code must be accurately entered in the “Warranty Claim Code” field of the transaction.
•
When more than one Warranty Claim Code is generated for a programming event, it is required to document all
Warranty Claim Codes in the “Correction” field on the job card. Dealers must also enter one of the codes in the
“Warranty Claim Code” field of the transaction, otherwise the transaction will reject. It is best practice to enter the
FINAL code provided by SPS/SPS2.
Warranty Claim Code Information Retrieval
If the Warranty Claim Code was not recorded on the Job Card, the code can be retrieved in the SPS system as follows:
1.
2.
3.
4.
Open TLC/TIS on the computer used to program the vehicle.
Select and start SPS/SPS2.
Select Settings.
Select the Warranty Claim Code tab.
Page 3 of 8
Special Coverage Adjustment
N202302720 On Track Performance Engine Overheating
The VIN, Warranty Claim Code and Date/Time will be listed on a roster of recent programming events. If the code is
retrievable, dealers should resubmit the transaction making sure to include the code in the SPS Warranty Claim Code
field.
**
For USA and Canada: Submit the dollar amount reimbursed to the Customer in Net/Reimbursement. Submit $20.00
administrative allowance in Net/Admin Allowance.
For Export: Submit the dollar amount reimbursed to the Customer in Net/Reimbursement.
*** Submit $10.00 administrative allowance in Net/Admin Allowance.
Service Procedure
Automatic Transmission
1.
Replace the radiator. Refer to Radiator Replacement in SI.
Caution: Before downloading the update files, be sure the computer is connected to the internet through a network cable
(hardwired). DO NOT DOWNLOAD or install the files wirelessly. If there is an interruption during programming,
programming failure or control module damage may occur.
Important: Carefully read and follow the instructions below.
•
Ensure the programming tool is equipped with the latest software and is securely connected to the data link connector.
If there is an interruption during programming, programming failure or control module damage may occur.
•
Stable battery voltage is critical during programming. Any fluctuation, spiking, over voltage or loss of voltage will
interrupt programming. Install a GM Authorized Programming Support Tool to maintain system voltage. Refer to
www.gmdesolutions.com for further information. If not available, connect a fully charged 12 V jumper or booster
pack disconnected from the AC voltage supply. DO NOT connect a battery charger.
•
Turn OFF or disable systems that may put a load on the vehicles battery such as; interior lights, exterior lights
(including daytime running lights), HVAC, etc.
•
Clear DTCs after programming is complete. Clearing powertrain DTCs will set the Inspection/Maintenance (I/M)
system status indicators to NO.
Page 4 of 8
Special Coverage Adjustment
N202302720 On Track Performance Engine Overheating
5431207
Important: TIS2WEB screen shown. Techline Connect screen is similar and will be included in the near future.
Important: If the same Calibration/Software Warning is noted on the SPS screen, select OK and follow screen
instructions. After a successful programming event, the WCC is located in the Service Programming System dialogue box
of the SPS Summary screen. No further action is required. Refer to the Warranty section of the bulletin.
2.
Reprogram the Transmission Control Module. Refer to K71 Transmission Control Module: Programming and Setup
in SI.
2.1. Select “Refresh Characterization Data” when prompted to select a programming type.
Page 5 of 8
Special Coverage Adjustment
N202302720 On Track Performance Engine Overheating
5431209
Important: TIS2WEB screen shown. Techline Connect screen is similar and will be included soon.
Important: To avoid warranty transaction rejections, you MUST record the warranty claim code provided on the SPS
Warranty Claim Code (WCC) screen on the job card. Refer to callout 1 above for the location of the WCC on the SPS
screen.
3.
Record SPS Warranty Claim Code on job card for warranty transaction submission.
Drain the cooling system. Refer to Cooling System Draining and Filling in SI.
2.
Remove the Front Bumper Fascia Lower Stiffener. Refer to Front Bumper Fascia Lower Stiffener Replacement (LT1
LT4) in SI.
3.
Remove the radiator inlet and outlet hoses. Refer to Radiator Inlet Hose Replacement (LT1 LT4) and Radiator Outlet
Hose Replacement (LT1 LT4) in SI.
4.
Regardless of the model year of your vehicle, refer to 2019 model year Corvette in SI for the remaining instructions.
5.
Install the radiator inlet and outlet hoses. Refer to Radiator Inlet Hose Replacement (LT1, LT4 with V08 Radiator
Outlet Hose Tee to Radiator) and Radiator Outlet Hose Replacement (LT1, LT4 with V08 Radiator Outlet Hose Tee
to Radiator) in SI.
6.
Install the Auxiliary Radiator. Refer to Auxiliary Radiator Replacement (LT1, LT4 with V08) in SI.
7.
Install the Auxiliary Radiator Inlet pipes. Refer to Auxiliary Radiator Inlet Pipe Replacement (LT1, LT4 with V08) in
SI.
8.
Install the Auxiliary Radiator Inlet hoses. Refer to Auxiliary Radiator Inlet Hose Replacement (LT1, LT4 with V08) in
SI.
9.
Install the Front Bumper Fascia Lower Stiffener. Refer to Front Bumper Fascia Lower Stiffener Replacement (LT1
LT4) in SI.
10. Refill the cooling system. Refer to Cooling System Draining and Filling in SI.
Page 6 of 8
Special Coverage Adjustment
N202302720 On Track Performance Engine Overheating
Courtesy Transportation – For USA & Canada
Courtesy transportation is available for Customers whose vehicles are involved in a product program and still within the
warranty coverage period. See General Motors Service Policies and Procedures Manual for courtesy transportation
program details.
Customer Notification
General Motors will notify Customers of this special coverage on their vehicle (see copy of typical Customer letter included
with this bulletin). The customer must provide evidence of an overheating condition in the form of one of the following:
•
Diagnostic Trouble Code, photos, videos, documented complaints of overheating prior to the special
coverage, or a track receipt.
The dealer should make a copy of any customer evidence provided and file with the warranty claim.
Customer Reimbursement
Customer requests for reimbursement of previously paid repairs to correct the condition described in this bulletin are to
be submitted to the dealer prior to or by January 31, 2022. See General Motors Service Policies and Procedures Manual,
Product Field Action Customer Reimbursement Procedure (USA & Canada) or local Policies and Procedures, for details.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of
conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained
technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT
assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your
vehicle may benefit from the information.
We Support
Voluntary Technician
Certification
Page 7 of 8
Special Coverage Adjustment
N202302720 On Track Performance Engine Overheating
January 2021
This notice applies to your vehicle, VIN: _____________________________________
Dear General Motors Customer:
As the owner of a 2015-2018 model year Chevrolet Corvette, your satisfaction with our product is very important to us.
This letter is intended to make you aware that some 2015-2018 model year Chevrolet Corvette vehicles may have a
condition where the vehicle may overheat and enter a reduced power mode when driven on a track at sustained high
speeds in high ambient temperatures.
Do not take your vehicle to your GM dealer as a result of this letter unless you believe that your vehicle has the
condition as described above.
What We Have Done: General Motors is providing owners with additional protection for the condition described above.
If this condition occurs on your 2015-2018 model year Chevrolet Corvette within 7 years of the date your vehicle was
originally placed in service or 72,000 miles (116,000 km), whichever occurs first, the condition will be repaired for you by
installing an updated radiator package and, for automatic transmission vehicles, updated shift-point calibration software
at no charge. Diagnosis or repair for conditions other than the condition described above is not covered under this
special coverage program.
What You Should Do: If you believe that your vehicle has the condition described above, repairs and adjustments
qualifying under this special coverage must be performed by a General Motors dealer. You may want to contact your GM
dealer to find out how long they will need to have your vehicle so that you may schedule the appointment at a time that is
convenient for you. This will also allow your dealer to order parts if they are not already in stock. Keep this letter with
your other important glove box literature for future reference. In addition, please provide evidence of engine overheating
such as a stored Diagnostic Trouble Code, photos, or videos.
Reimbursement: If you have already paid for repairs for the condition described in this letter before the date of this
letter, please complete the enclosed reimbursement form and present it to your dealer with all required documents.
Working with your dealer will expedite your request, however, if this is not convenient, you may mail the completed
reimbursement form and all required documents to Reimbursement Department, PO Box 33170, Detroit, MI 482325170. The completed form and required documents must be presented to your dealer or received by the
Reimbursement Department by January 31, 2022, unless state law specifies a longer reimbursement period. GM will
only reimburse reasonable repairs relating solely to the condition described in this letter.
The right to submit reimbursement claims is provided by GM solely in the interest of customer satisfaction and is
personal to vehicle owners and lessees who previously paid for repairs referenced in this Special Coverage
(“Customers”) before the date of this letter. Customers may not assign and GM does not consent to any
assignment of any Customer’s right to submit reimbursement claims, or to receive reimbursement, or any
other rights granted by this Special Coverage to any third party, including but not limited to service contract
providers, and this Special Coverage is not intended to and does not confer any third party beneficiary,
subrogation or contribution rights, or any other rights to reimbursement, against GM, whether in law, equity or
otherwise, on any third parties.
If you have any questions or need any assistance, please contact your dealer or the appropriate Customer Assistance
Center at the number listed below.
Division
Chevrolet
Puerto Rico – English
Puerto Rico – Español
Virgin Islands
Number
1-800-630-2438
1-800-496-9992
1-800-496-9993
1-800-496-9994
Text Telephones (TTY)
1-800-833-2438
We are sorry for any inconvenience you may experience; however, we have taken this action in the interest of your
continued satisfaction with our products.
Neelie O’Connor
Global Executive Director
Customer Experience Operations
Enclosure
N202302720
Page 8 of 8
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: N202302720 01
Replacement Service Bulletin Number:
MFR Communication Date: 2021-01-28
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.