NHTSA ID Number: 10187212
Manufacturer Communication Number: N202313200
TSB/Document Date: 2021-02-16
Summary
Emission - General Motors has decided to conduct a Voluntary Emission Recall involving certain 2017-2020 Chevrolet Colorado and GMC Canyon vehicles. General Motors has determined that evaporative emissions canister service parts that were manufactured during a certain time period and installed in vehicles during a service repair were not manufactured to engineering specifications. Dealers are to inspect the evaporative emissions canister and replace it if the part does not meet engineering specifications.
GLOBAL SAFETY FIELD INVESTIGATIONS
DCS5613
URGENT - DISTRIBUTE IMMEDIATELY
Date:
December 15, 2020
Subject: N202313200 - Emission Recall
LEV3 Canister Scrubber Missing for Service Parts
Models: 2017-2020 Chevrolet
Colorado
2017-2020 GMC
Canyon
Equipped with 2.5L or 3.6L Engine (RPO LCV or LGZ)
To:
All General Motors
Dealers
General Motors
is releasing Emission Recall N202313200 today. The total
number of U.S. vehicles involved is approximately 622. Please see the
attached bulletin for details.
Vehicles involved in this recall were placed on stop delivery in CANADA only on
October 16, 2020. Once the service procedure contained in the bulletin has
been performed on the vehicle, the vehicle is released from stop delivery and the
vehicle can be delivered to the customer.
Working Capital Assistance Program (WCAP) Eligibility (CANADA ONLY)
Vehicles which were in dealer inventory at the time of this bulletin release were
eligible for WCA. Please refer to the attached bulletin and GlobalConnect
Message GCUS-9-9188 for additional information.
Customer Letter Mailing
The customer letter mailing will begin on December 30, 2020.
Global Warranty Management (GWM)
The Required Field Action section on the Investigate Vehicle History (IVH) screen will
be updated December 16, 2020 or sooner. All involved vehicles are customer driven,
there are no inventory vehicles. Please hold all warranty transactions until IVH has
been updated.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS
Product Emission Recall
N202313200 LEV3 Canister Scrubber Missing for Service Parts
Release Date:
Attention:
December 2020
Revision:
00
All involved vehicles that are in dealer inventory must be held and not delivered to customers, dealer
traded, or used for demonstration purposes until the repair contained in this bulletin has been performed
on the vehicle.
Make
Chevrolet
Model
Colorado
GMC
Canyon
Model Year
From
To
2017
2020
RPO
LCV
or
LGZ
Description
2.5L Engine I4, DI, DOHC, VVT
or
3.6L Engine V6, DI, DOHC
Involved vehicles are marked “open” on the Investigate Vehicle History screen in GM Global Warranty Management
system. This site should always be checked to confirm vehicle involvement prior to beginning any required inspections
and/or repairs.
Condition
Correction
General Motors
has decided to conduct a Voluntary Emission Recall involving certain 2017-2020
Chevrolet
Colorado and GMC
Canyon vehicles. General Motors has determined that evaporative
emissions canister service parts that were manufactured during a certain time period and installed in
vehicles during a service repair were not manufactured to engineering specifications.
Dealers are to inspect the evaporative emissions canister and replace it if the part does not meet
engineering specifications.
Parts
Quantity
1
Part Name
Part No.
84835953
Evaporative Emission Canister
Note: Use the VIN and the GM Electronic Parts Catalog (EPC) to determine which evaporative emission canister to order.
Due to the small number of vehicles involved, (763), and due to limited initial parts availability, dealers are encouraged
not to order recall parts for use as shelf stock. Parts should only be ordered when inspection determines that it is
necessary to replace the evaporative emission canister.
Reminder: Parts may be removed from Retail Inventory Management (RIM). Dealers should review the affected parts
to confirm RIM managed status.
Warranty Information
Labor
Operation
9105332
9105333
9105375
Description
Inspect Only – No Further Action Required
Replace Evaporative Emission Canister
Working Capital Assistance Program Reimbursement – USED
INVENTORY ONLY
Labor
Time
0.2
0.2
N/A
Trans.
Type
Net
Item
N/A
ZFAT
*
Working Capital Assistance Program (WCAP) Reimbursement – USED INVENTORY ONLY
Note: Canada Only - To avoid having to “H” route the WCAP transaction for approval, it must be submitted prior to the
repair transaction.
Important: The WCAP ZSET transaction labor code, 9800055, provided in the dealer message sent on October
16, 2020 for Canada, must have been submitted prior to the submittal of the ZFAT transaction labor code or the
claim will reject.
*
Canada Dealers Only - For vehicles eligible under the Working Capital Assistance Program, the amount should
be submitted in Net Item/Miscellaneous. This amount has been calculated to a daily value for the days that the
vehicle was in used dealer inventory and not available for sale. This reimbursement is limited to the number of
days from the date of the stop sale/stop delivery order October 16, 2020 to the date the inspection or repair closed
the recall bulletin. (not to exceed 62 days).
Copyright 2020 General Motors
. All Rights Reserved.
Page 1 of 5
Product Emission Recall
N202313200 LEV3 Canister Scrubber Missing for Service Parts
Vehicle
2017 Chevrolet Colorado
2018 Chevrolet
Colorado
2019 Chevrolet Colorado
2020 Chevrolet Colorado
2017 GMC Canyon
2018 GMC Canyon
2019 GMC
Canyon
2020 GMC
Canyon
Working Capital Assistance Reimbursement Amount (CAN only)
$13.44
$14.58
$15.71
$17.08
$12.88
$13.90
$15.27
$16.56
Service Procedure
1.
Lift the vehicle. Refer to Lifting and Jacking the Vehicle in SI.
5660491
Inspect the Evaporative Emission Canister part number and Julian date as shown.
2.
•
If the part number (1) is 84065746, replace the Evaporative Emission Canister. Refer to Evaporative Emission
Canister Replacement in SI.
•
If the part number (1) is 84835953, AND the first three digits of the Julian date (2) are 072 or lower, replace the
Evaporative Emission Canister. Refer to Evaporative Emission Canister Replacement in SI.
•
If the part number (1) is 84835953, and the first three digits of the Julian date (2) are NOT 0720 or lower, no
further action is required.
•
If the part number is NOT 84065746 or 84835953, no further action is required.
Lower the vehicle. Refer to Lifting and Jacking the Vehicle in SI.
Page 2 of 5
Product Emission Recall
N202313200 LEV3 Canister Scrubber Missing for Service Parts
3.
CALIFORNIA VEHICLES ONLY: Complete a “Proof of Correction” certificate and provide to the vehicle owner upon
recall completion.
Dealer Responsibility
All new, used, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc. in dealers' possession
and subject to this recall must be held and inspected/repaired per the service procedure of this bulletin before customers
take possession of these vehicles. Involved vehicles must be held and not delivered to customers, dealer-traded,
released to auction, used for demonstration, or any other purpose.
All GM Certified Used vehicles currently in the dealers’ inventory within the Certified Pre-Owned Inventory System
(CPOIS) will be de-certified and must be held and remedied per the service procedure in this bulletin. Upon submitting
an accepted/paid warranty transaction in the Global Warranty Management (GWM) system, the vehicle can be re-certified
for sale within the CPOIS system, or once again be used in the CTP program.
Dealers are to service all vehicles subject to this recall at no charge to customers, regardless of mileage, age of vehicle,
or ownership, from this time forward.
Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer
information indicated on the dealer listing, are to be contacted by the dealer. Arrangements are to be made to make the
required correction according to the instructions contained in this bulletin. A copy of the customer letter is provided in this
bulletin for your use in contacting customers. Recall follow-up cards should not be used for this purpose, since the
customer may not as yet have received the notification letter.
In summary, whenever a vehicle subject to this field action enters your vehicle inventory you must take the steps
necessary to ensure the program correction has been made before selling the vehicle. In addition, for vehicles entering
your facility for service, you are required to ensure the customer is aware of the open field action and make every
reasonable effort to implement the program correction as set forth in this bulletin prior to releasing the vehicle.
***THE FOLLOWING 2 PARAGRAPHS ARE NOT FOR CANADA OR EXPORT***
When a California emissions recall is completed by a GM dealer, the dealer must provide the vehicle owner a “Proof of
Correction Certificate” which the owner may need to present to the California Department Of Motor Vehicles (DMV) when
renewing their vehicle registration. Without this correction certificate, the owner may be unable to renew their vehicle
registration.
Additional Certificates can be obtained, at no charge, from the 1Store application in GlobalConnect. Request GM Item
Number 1825 when ordering.
Dealer Reports
For dealers with involved vehicles, a listing has been prepared and will be available through GM GlobalConnect Maxis
Field Action Reports or sent directly to export dealers. The Inventory tab of the dealer reports will contain VINs that
apply to this recall. This information is intended to assist dealers with the PROMPT COMPLETION of these
vehicles. The Customer In-Service tab will contain customer names and addresses from Motor Vehicle Registration
Records. The use of such motor vehicle registration data for any purpose other than follow-up necessary to complete
this recall may be a violation of law in several states.
Courtesy Transportation – For USA & Canada
Courtesy transportation is available for customers whose vehicles are involved in a product program and still within the
warranty coverage period. See General Motors Service Policies and Procedures Manual for courtesy transportation
program details.
Customer Notification
USA & Canada - General Motors will notify customers of this recall on their vehicle (see copy of customer letter included
with this bulletin).
In order to ensure full protection under the emission warranty, and the right to participate in future recalls, the customer
notification letter recommends that customers have their vehicles serviced as soon as possible. It also advises that failure
to do so could legally be determined to be lack of proper maintenance. The vehicle may fail a state or local emission
inspection test if the recall work is not completed.
Export - Letters will be sent to known owners of record located within areas covered by the US National Traffic and Motor
Vehicle Safety Act. For owners outside these areas, dealers should notify customers using the attached sample letter.
Page 3 of 5
Product Emission Recall
N202313200 LEV3 Canister Scrubber Missing for Service Parts
In order to ensure full protection under the emission warranty, and the right to participate in future recalls, the customer
notification letter recommends that customers have their vehicles serviced as soon as possible. It also advises that failure
to do so could legally be determined to be lack of proper maintenance. The vehicle may fail a state or local emission
inspection test if the recall work is not completed.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of
conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained
technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT
assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your
vehicle may benefit from the information.
We Support
Voluntary Technician
Certification
Page 4 of 5
Product Emission Recall
N202313200 LEV3 Canister Scrubber Missing for Service Parts
December 2020
This notice applies to your vehicle, VIN: _____________________________________
Dear General Motors Customer:
This notice is sent to inform you that General Motors is conducting a voluntary emission recall that includes your
vehicle.
Reason For This Recall: Your 2017 - 2020 model year Chevrolet
Colorado or GMC Canyon vehicle, equipped with a
2.5L. or 3.6L engine has been certified to meet California and Federal emissions standards and may be releasing air
pollutants which exceed these standards. General Motors
has determined that evaporative emissions canister service
parts that were manufactured during a certain time period and installed in vehicles during a service repair were not
manufactured to engineering specifications.
What Will Be Done: Your GM dealer will inspect the evaporative emissions canister and replace it if the part does not
meet engineering specifications. This service will be performed for you at no charge. Eligibility for this service will not
be denied solely due to your Chevrolet
Colorado or GMC Canyon vehicle having non-GM parts or repairs performed by
outlets other than a GM franchised dealer.
How Long Will The Repair Take? Because of service scheduling requirements, it is likely that your dealer will need
your vehicle longer than the actual service correction time of approximately 15 minutes.
What You Should Do: Please contact your GM dealer as soon as possible to arrange a service date and to assure
parts availability. Instructions for making this correction have been sent to your dealer. Please ask your dealer if you
wish to know how much time will be needed to schedule, process, and repair your vehicle.
If you have any questions or need any assistance, just contact your dealer or the appropriate Customer Assistance
Center at the number listed below.
Division
Chevrolet
GMC![]()
Puerto Rico – English
Puerto Rico – Español
Virgin Islands
Number
1-800-630-2438
1-866-996-9463
1-800-496-9992
1-800-496-9993
1-800-496-9994
Text Telephones (TTY)
1-800-833-2438
1-800-462-8583
Emission Law Information: In order to ensure your full protection under the emission warranty made applicable to
your vehicle by state and federal law, and your right to participate in future recalls, it is recommended that you have
your vehicle serviced as soon as possible. Failure to do so could legally be determined to be lack of proper
maintenance of your vehicle. Also, your vehicle may fail a state or local emission inspection if this recall is not
accomplished.
IMPORTANT MESSAGE FOR CALIFORNIA RESIDENTS
The California Air Resources Board (CARB) requires vehicle emission recalls be completed prior to California
registration renewal. Uncorrected emission recalls will result in the inability to renew your California vehicle registration.
At the time of emission recall completion, your California dealer will issue a "Proof of Correction Certificate". Keep this
certificate and, if required, present it to the Department of Motor Vehicles when renewing your California registration as
proof of recall completion.
We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your continued
satisfaction with our products.
Maryann L. Combs
Vice President
Global Vehicle Safety
N202313200
Page 5 of 5
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: N202313200
Replacement Service Bulletin Number:
MFR Communication Date: 2020-12-15
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford
, for Lincoln
, and for Mazda
ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




