NHTSA ID Number: 10187209
Manufacturer Communication Number: N202310850 01
TSB/Document Date: 2021-02-16
Summary
Customer Satisfaction Program (Revised Correction, Service Procedure and Warranty Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
GLOBAL SAFETY FIELD INVESTIGATIONS
DCS5596
URGENT - DISTRIBUTE IMMEDIATELY
Date:
December 2, 2020
Subject: N202310850 01 - Customer Satisfaction Program
Airbag Indicator Light Intermittent
Revised Correction, Warranty Information and Service Procedure
Models: 2021 Cadillac
Escalade, Escalade ESV
2021 Chevrolet
Suburban, Tahoe
2021 GMC
Yukon, Yukon XL
Equipped with Restraint System-Seat, Inflatable, Driver & Pass Frt, Frt
Seat Side, Frt Inboard Seat Side, Roof Side (RPO AYQ)
To:
All General Motors
Dealers
General Motors
released Customer Satisfaction Program N202310850
yesterday. The correction, warranty information, and service procedure in this
bulletin have been updated to remove the inspection steps. The total number
of U.S. vehicles involved is approximately 90,005. Please see the attached
updated bulletin for details.
Please discard all previous copies of N202310850.
Customer Letter Mailing
The customer letter mailing will begin on December 15, 2020.
Global Warranty Management (GWM)
The Required Field Action section on the Investigate Vehicle History (IVH) screen was
updated on December 1, 2020. A list of involved vehicles in dealer new inventory is
attached to this message.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS
Customer Satisfaction Program
N202310850 Airbag Indicator Light Intermittent
Release Date:
Revision Description:
Attention:
December 2020
Revision:
01
The correction, warranty information, and service procedure in this bulletin have been
updated to remove the inspection steps. Please discard all previous copies of
N202310850.
This program is in effect until December 31, 2022.
Make
Cadillac![]()
Model
Escalade
Escalade ESV
Suburban
Tahoe
Yukon
Yukon XL
Model Year
From
To
2021
2021
RPO
Description
AYQ
Restraint System-Seat,
Inflatable, Driver & Pass Frt, Frt
Seat Side, Frt Inboard Seat Side,
Roof Side
Involved vehicles are marked “open” on the Investigate Vehicle History screen in GM Global Warranty Management
system. This site should always be checked to confirm vehicle involvement prior to beginning any required inspections
and/or repairs.
Condition
Correction
In certain 2021 model year Cadillac
Escalade, Escalade ESV, Chevrolet
Suburban, Tahoe, GMC
Yukon
and Yukon XL vehicles, driver movement can disrupt the electrical connection to the seat-mounted
inboard airbag system. This airbag system is supplemental and not required equipment under applicable
Federal Motor Vehicle Safety Standards. If this occurs, the vehicle’s driver information center will display
a “Service Restraints System” message to the driver before resistance at the connection will prevent the
deployment of the airbag.
Dealers are to replace the driver seat inboard airbag electrical connector.
Parts
Quantity
1
2
Part Name
Service Harness
Salmon 20-18 Gauge Wire Splice Sleeve (Merchandising Pack of 10 pieces)
Part No.
13530533
19300089
Reminder: Parts may be removed from Retail Inventory Management (RIM). Dealers should review the affected parts
to confirm RIM managed status. Parts may have quantity limiters in effect.
Warranty Information
Labor
Operation
9105432
Description
Replace Driver Seat Inboard Airbag Electrical Connector and Clear
DTC information
Labor
Time
0.8
Trans.
Type
ZFAT
Net
Item
N/A
Service Procedure
1.
Place the driver seat in the full forward position with the seat back in the full upright position.
2.
Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in SI.
3.
Remove the driver seat back finish panel. Refer to Front Seat Back Finish Panel Replacement in SI.
4.
Disconnect the rear inboard side of the seat cushion/cover from the seat structure by releasing the retaining clips.
Copyright 2020 General Motors
. All Rights Reserved.
Page 1 of 7
Customer Satisfaction Program
N202310850 Airbag Indicator Light Intermittent
5672137
5.
Position the seat cushion/cover to expose the driver seat inboard airbag connector.
Note: For clarification, the following photos show the seat cover off and the seat out of the vehicle. This procedure is
performed with the seat cover on and the seat in the vehicle.
6.
Disengage the two CPA’s on the inboard airbag electrical connector and remove the connector from the airbag.
5672139
Note: There may be butyl tape over the harness and connector from a previous repair. Remove the butyl tape as
necessary. Tape residue can be left on the repair area, it does not need to be completely removed.
5672141
Page 2 of 7
Customer Satisfaction Program
N202310850 Airbag Indicator Light Intermittent
5672144
7.
Measure 30 mm from the connector on the seat harness and cut the two wires at this point.
5672147
8.
Unwrap the electrical tape to the first attachment location.
.
Note: The service connector has exceptionally long leads, discard any unused wire material.
5672148
Page 3 of 7
Customer Satisfaction Program
N202310850 Airbag Indicator Light Intermittent
5672149
9.
On the service connector, measure 80 mm from the connector and cut the two wires at this point.
10. Splice the service connector to the seat wiring harness. Refer to Wire to Wire Repair in SI.
5672150
11. Using fabric anti abrasion electrical tape, rewrap the wiring harness.
12. Connect the seat side harness to the airbag. Ensure the CPA’s are fully engaged.
5672151
13. Position the harness into the channel on the seat frame as shown.
Page 4 of 7
Customer Satisfaction Program
N202310850 Airbag Indicator Light Intermittent
5672152
14. Secure the harness to the seat frame using fabric anti abrasion electrical tape.
5672153
15. Inspect that the connector and CPA’s are fully seated, and the bundle is taped in place.
16. Reconnect the rear inboard side of the seat cushion/cover to the seat structure. Ensure the cover is properly fitted
and free of wrinkles.
17. Reinstall the driver seat back finish panel. Refer to Front Seat Back Finish Panel Replacement in SI.
18. Reconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in SI.
19. Clear any DTC codes.
Dealer Responsibility
All new, used, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc. in dealers' possession
and subject to this program must be held and inspected/repaired per the service procedure of this bulletin before
customers take possession of these vehicles. Involved vehicles must be held and not delivered to customers, dealertraded, released to auction, used for demonstration, or any other purpose.
All GM Certified Used vehicles currently in the dealers’ inventory within the Certified Pre-Owned Inventory System
(CPOIS) will be de-certified and must be held and remedied per the service procedure in this bulletin. Upon submitting
an accepted/paid warranty transaction in the Global Warranty Management (GWM) system, the vehicle can be re-certified
for sale within the CPOIS system, or once again be used in the CTP program.
Dealers are to service all vehicles subject to this program at no charge to customers, regardless of mileage, age of vehicle,
or ownership, through December 31, 2022. Customers who have recently purchased vehicles sold from your vehicle
inventory, and for which there is no customer information indicated on the involved vehicle listing, are to be contacted by
the dealer. Arrangements are to be made to make the required correction according to the instructions contained in this
Page 5 of 7
Customer Satisfaction Program
N202310850 Airbag Indicator Light Intermittent
bulletin. A copy of the customer letter is provided in this bulletin for your use in contacting customers. Program followup cards should not be used for this purpose, since the customer may not as yet have received the notification letter.
In summary, through December 31, 2022, whenever a vehicle subject to this field action enters your vehicle inventory,
you must take the steps necessary to ensure the program correction has been made before selling the vehicle. In addition,
for vehicles entering your facility for service, you are required to ensure the customer is aware of the open field action
and make every reasonable effort to implement the program correction as set forth in this bulletin prior to releasing the
vehicle.
Dealer Reports
For dealers with involved vehicles, a listing has been prepared and will be available through GM GlobalConnect Maxis
Field Action Reports or sent directly to export dealers. The Inventory tab of the dealer reports will contain VINs that
apply to this field action. This information is intended to assist dealers with the PROMPT COMPLETION of these
vehicles. The Customer In-Service tab will contain customer names and addresses from Motor Vehicle Registration
Records. The use of such motor vehicle registration data for any purpose other than follow-up necessary to complete
this field action may be a violation of law in several states.
Courtesy Transportation – For USA & Canada
Courtesy transportation is available for customers whose vehicles are involved in a product program and still within the
warranty coverage period. See General Motors
Service Policies and Procedures Manual for courtesy transportation
program details.
Customer Notification
USA & Canada - General Motors
will notify customers of this program on their vehicle (see copy of customer letter included
with this bulletin).
Export - Letters will be sent to known owners of record located within areas covered by the US National Traffic and Motor
Vehicle Safety Act. For owners outside these areas, dealers should notify customers using the attached sample letter.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of
conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained
technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT
assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your
vehicle may benefit from the information.
We Support
Voluntary Technician
Certification
Page 6 of 7
Customer Satisfaction Program
N202310850 Airbag Indicator Light Intermittent
December 2020
This notice applies to your vehicle, VIN: ________________________________
Dear General Motors Customer:
We have learned that in certain 2021 model year Cadillac
Escalade, Escalade ESV, Chevrolet
Suburban, Tahoe, GMC![]()
Yukon or Yukon XL vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag
system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety
Standards. If this occurs, the vehicle’s driver information center will display a “Service Restraints System” message to
the driver before resistance at the connection will prevent the deployment of the airbag.
Your satisfaction with your GM vehicle is very important to us, so we are announcing a program to prevent this condition
or, if it has occurred, to fix it.
What We Will Do: Your GM dealer will replace the driver seat inboard airbag electrical connector. This service will be
performed for you at no charge until December 31, 2022. After that, any applicable warranty will apply.
What You Should Do: To limit any possible inconvenience, we recommend that you contact your dealer as soon as
possible to schedule an appointment for this repair. By scheduling an appointment, your dealer can ensure that the
necessary parts will be available on your scheduled appointment date.
If you have any questions or concerns that your dealer is unable to resolve, please contact the appropriate Customer
Assistance Center at the number listed below.
Division
Cadillac![]()
Chevrolet![]()
GMC![]()
Puerto Rico – English
Puerto Rico – Español
Virgin Islands
Number
1-866-982-2339
1-800-630-2438
1-866-996-9463
1-800-496-9992
1-800-496-9993
1-800-496-9994
Text Telephones (TTY)
1-800-833-2622
1-800-833-2438
1-800-462-8583
We truly appreciate you taking the time to remedy your vehicle as we know your time is valuable. We want you to know
that we will do our best, throughout your ownership experience, to ensure that your GM vehicle provides you many
miles of enjoyable driving.
Neelie O’Connor
Global Executive Director
Customer Experience Operations
N202310850
Page 7 of 7
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: N202310850 01
Replacement Service Bulletin Number:
MFR Communication Date: 2020-12-02
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford
, for Lincoln
, and for Mazda
ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




