NHTSA ID Number: 10185413
Manufacturer Communication Number: 20-FL-011H
TSB/Document Date: 2021-01-09
Summary
This bulletin provides information related to an Electronic Control Module (ECM) software update which revises DTC P00D2: Oxygen Sensor Heater Control Circuit Range/Performance Bank 1 diagnostic logic.
GROUP
NUMBER
FUEL SYSTEM
Technical Service Bulletin
DATE
20-FL-011H
MODEL(S)
DECEMBER, 2020
SANTA FE (TMA)
ECM SOFTWARE UPDATE – DTC P00D2
SUBJECT:
Description:
This bulletin provides information related to an Electronic Control Module (ECM) software update
which revises DTC P00D2: Oxygen Sensor Heater Control Circuit Range/Performance Bank 1
diagnostic logic.
Applicable Vehicle: Certain 2019 - 2020MY Santa Fe (TMA) equipped with 2.4L GDI engine.
Warranty Information:
Model
Op. Code
Operation
Op. Time
Causal Part
Nature
Code
Cause
Code
Santa Fe (TMA)
00DA23R0
ECM UPGRADE
0.3 M/H
39171-2GTC0
I3T
ZZ3
NOTE 1: Submit Claim on Campaign Claim Entry Screen.
NOTE 2: If a part is found in need of replacement while performing this TSB and the affected
part is still under warranty, submit a separate warranty claim using the same Repair Order. If
the affected part is out of warranty, submit a Prior Approval Request for goodwill
consideration prior to performing the work.
GDS Information:
System Selection: ENGINE CONTROL MODULE (ECM)
Event #
Description
623*
TMA 2.4GDI – P00D2 DTC LOGIC IMPROVEMENT
(*or use a later available event as listed in the GDS ECU Update screen if one is available.)
Service Procedure:
1. Perform GDS Mobile software update per TSB 15-GI-001.
2. After successful completion of ECM software update, check for Diagnostic Trouble Codes in
ALL menus and erase any DTC.
3. Confirm normal vehicle operation.
NOTICE
You must initially perform GDS ECM Update in Auto Mode. If the ECM Update starts but
then fails in Auto Mode, perform the update in Manual Mode to recover.
Circulate To: Service Manager, Warranty Manager, Service Advisors, Technicians, Fleet Repair
ECM SOFTWARE UPDATE – DTC P00D2
SUBJECT:
!
GDS-M Vehicle Battery Low Voltage Warning:
When the vehicle battery is lower than 12 volts, the GDS-M will trigger a Low Battery Voltage
Warning. If this Warning occurs,
A. Connect the battery to a fully charged battery jump pack
or GR8 charger using “Power
Supply Mode” to continue the software update.
OR
B. Select “BACK” to exit the SW update. Then, start the engine and idle with the headlights
on for 20 minutes. Return to the SW update after charging the battery.
ECM ROM ID Information Table:
MODEL
MY
(EMISSION)
IMMO.
PCM P/No.
ROM ID
OLD
NEW
TMAJNC48SE2A
TMAJNC48SE2B
TMAJNC48SEAC
19MY
(ULEV)
39171-2GTC0
+IMMO
39171-2GTD0
TMAJNC48SEAD
TMAJNC48SEAE
TMAJNC48SEAF
TMAJNC48SG1E
TMAJNC48SG1A
TMAJNC48SG1B
TMAJNC48SG1C
TMAJNC48SG1D
TMA
2.4L GDI
TMAJNC48NE2A
TMAJNC48NE2B
TMAJNC48NEAC
19MY
(ULEV)
-IMMO
39173-2GTE0
TMAJNC48NEAD
TMAJNC48NEAE
39173-2GTF0
TMAJNC48NEAF
TMAJNC48NG1E
TMAJNC48NG1A
TMAJNC48NG1B
TMAJNC48NG1C
TMAJNC48NG1D
TSB #: 20-FL-011H
Page 2 of 4
SUBJECT:
ECM SOFTWARE UPDATE – DTC P00D2
SUBJECT:
MODEL
MY
(EMISSION)
IMMO.
PCM P/No.
ROM ID
OLD
NEW
TMAJNS48SE2A
TMAJNS48SE2B
TMAJNS48SEAC
TMAJNS48SEAD
19MY
(SULEV)
+IMMO
39171-2GTC5
TMAJNS48SEAE
TMAJNS48SEAF
TMAJNS48SG1E
TMAJNS48SG1A
TMAJNS48SG1B
TMAJNS48SG1C
TMAJNS48SG1D
TMAJNS48NE2A
TMAJNS48NE2B
TMAJNS48NEAC
TMAJNS48NEAD
19MY
(SULEV)
-IMMO
39173-2GTG0
TMAJNS48NEAE
TMAJNS48NEAF
TMAJNS48NG1E
TMAJNS48NG1A
TMAJNS48NG1B
TMAJNS48NG1C
TMA
2.4L GDI
TMAJNS48NG1D
20MY
(ULEV)
39171-2GTC1
+IMMO
39171-2GTD1
TMAKNC48SG1A
TMAKNC48SG1B
TMAKNC48SG1C
TMAKNC48SG3A
TMAKNC48SG3C
TMAKNC48SG3B
20MY
(ULEV)
39173-2GTE1
-IMMO
39173-2GTF1
TMAKNC48NG1A
TMAKNC48NG1B
TMAKNC48NG1C
TMAKNC48NG3C
TMAKNC48NG3A
TMAKNC48NG3B
TMAKNS48SG1A
TMAKNS48SG1B
20MY
(SULEV)
+IMMO
39171-2GTC6
TMAKNS48SG1C
TMAKNS48SG3C
TMAKNS48SG3A
TMAKNS48SG3B
TSB #: 20-FL-011H
Page 3 of 4
SUBJECT:
ECM SOFTWARE UPDATE – DTC P00D2
SUBJECT:
MODEL
TMA
2.4L GDI
MY
(EMISSION)
IMMO.
ROM ID
OLD
NEW
TMAKNS48NG1A
TMAKNS48NG1B
20MY
(SULEV)
PCM P/No.
-IMMO
39173-2GTG1
TMAKNS48NG1C
TMAKNS48NG3C
TMAKNS48NG3A
TMAKNS48NG3B
NOTE: +IMMO = Start Stop Button, -IMMO = Key Start
Manual Mode Password Information Tables:
EVENT #
#623
MENU
PASSWORD
TMA 2.4GDI -IMMO 39173-2GTE0/F0
4811
TMA 2.4GDI -IMMO 39173-2GTG0
4812
TMA 2.4GDI -IMMO 39173-2GTE1/F1
4833
TMA 2.4GDI -IMMO 39173-2GTG1
4834
TMA 2.4GDI +IMMO 39171-2GTC0/D0
4815
TMA 2.4GDI +IMMO 39171-2GTC5
4816
TMA 2.4GDI +IMMO 39171-2GTC1/D1
4837
TMA 2.4GDI +IMMO 39171-2GTC6
4838
NOTE: +IMMO = Start Stop Button, -IMMO = Key Start
TSB #: 20-FL-011H
Page 4 of 4
SUBJECT:
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 20-FL-011H
Replacement Service Bulletin Number:
MFR Communication Date: 2020-12-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.