NHTSA ID Number: 10185360
Manufacturer Communication Number: LTB01287NAS4
TSB/Document Date: 2021-01-08
Summary
A vibration may be felt in the passenger compartment when starting the engine or when stationary with the engine at idle.
12/4/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
LT B 0 1 2 8 7 N A S 4
TECHNICAL BULLETIN
04 DEC 2020
© Jaguar
Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional
Technicians with the knowledge, tools, and equipment required to do the job properly
and safely. It informs these Technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should
not be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a
condition described affects your vehicle. Contact an authorized Land Rover service facility
to determine whether this bulletin applies to a specific vehicle.
I N F O R M AT I O N
This reissue replaces all previous versions. Please destroy all previous versions.
This bulletin supersedes TSB LTB01287NAS3/2019 dated 01 NOV 2019, which should
either be destroyed or clearly marked to show it is no longer valid (e.g. with a line across
the page). Only refer to the electronic version of this Technical Bulletin in TOPIx.
Changes are highlighted in blue
SECTION:
303-01
S U B J E C T/ C O N C E R N :
Vibration Felt In Passenger Compartment When Starting and/or Idling Engine
AFFECTED VEHICLE RANGE:
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
1/13
12/4/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
MODEL
YEAR:
MODEL:
VIN:
ASSEMBLY
PLANT:
APPLICABILITY:
Range Rover
Velar (LY)
2018-2019
700000799996
Solihull
INGENIUM I4 2.0L Diesel/INGENIUM
I4 2.0L Petrol
Range Rover
Velar (LY)
2019-2020
200017296418
Solihull
INGENIUM I4 2.0L Diesel/INGENIUM
I4 2.0L Petrol
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
SITUATION:
A vibration may be felt in the passenger compartment when starting the engine or when
stationary with the engine at idle.
CAUSE:
The active engine mounts are subject to premature wear. A new service part is now
available.
ACTION:
Follow the instructions below.
PA RTS :
NOTES:
An Electronic Product Quality Report (EPQR) must be submitted, including a
clear photograph of the original damaged/leaking active engine mounts
installed in the vehicle, for new active engine mounts (part numbers LR133315
and LR133316) to be released. See the service information section for an
example photograph.
Part numbers LR112414 and LR112416 may be re-used for installation if there
are no signs of damage or wear.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
2/13
12/4/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
PART NUMBER
DESCRIPTION
QUANTITY
LR133316
Active engine mount - Left
1
LR133315
Active engine mount - Right
1
LR073658
Exhaust manifold gasket - High Pressure (HP)
turbocharger
1
LR073663
Exhaust manifold spacers and bolts - HP
turbocharger
8
LR075627
Exhaust Gas Recirculation (EGR) pipe gasket - HP
turbocharger
1
LR112414
Turbocharger gasket kit - HP turbocharger
1
LR073687
Upper oil return O-ring seal - HP turbocharger
1
LR073688
Lower oil return O-ring seal - HP turbocharger
2
LR112416
Turbocharger outlet pipe O-ring kit - HP
turbocharger
1
LR073671
Turbocharger oil feed banjo washers - HP
turbocharger
2
LR073723
Turbocharger to exhaust manifold gasket - Low
Pressure (LP) turbocharger
1
LR073687
Upper oil return O-ring seal - LP turbocharger
1
LR073688
Lower oil return O-ring seal - LP turbocharger
1
LR073671
Turbocharger oil feed banjo washers - LP
turbocharger
2
LR084673
EGR cooler O-ring - LP turbocharger
1
LR083961
EGR cooler gasket - LP turbocharger
1
LR072251
Catalytic converter turbocharger gasket
1
LR111338
Catalytic converter turbocharger clamp
1
LR118293
EGR gasket
1
LR085942
Diesel Particulate Filter (DPF) to exhaust gasket
1
LR082314
EGR pipe to EGR valve gasket
1
LR083963
EGR pipe to intake manifold O-ring
1
LR105592
Thermostat to cylinder block gasket
1
LR133927
Vacuum pipe attachment - Right
1
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
3/13
12/4/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
PART NUMBER
LR133928
DESCRIPTION
QUANTITY
Vacuum pipe attachment - Left
1
WARRANT Y:
NOTES:
Repair procedures are under constant review, and therefore times are subject to
change; those quoted here must be taken as guidance only. Use TOPIx to obtain
the latest repair time.
The JLR claims submission system requires the use of causal part numbers. Labor
only claims must show the causal part number with a quantity of zero.
DESCRIPTION
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
Mounting - Set - Renew - Ingenium I4 2.0L
diesel (180PS)
12.45.20
1.8
AR
LR094228
Mounting - Set - Renew - Ingenium I4 2.0L
petrol
12.45.20
1
AR
LR094228
12.45.89.31
0.1
AR
LR094228
Active engine mount vacuum hose Modification
NOTE:
Normal Warranty procedures apply.
S E R V I C E I N F O R M AT I O N :
NOTE:
An EPQR must be submitted, including a clear photograph of the original
damaged/leaking active engine mounts installed in the vehicle, for new active
engine mounts (part numbers LR133315 and LR133316) to be released.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
4/13
12/4/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
1.
For the release of the new active engine mounts, the parts team will require a
photograph of the damaged/leaking active engine mounts. Make sure a clear
photograph is taken, with the active engine mount still installed to the vehicle, as
shown in the illustration.
2.
Example photograph of an excessively worn and/or leaking active engine mount.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
5/13
12/4/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
3.
Example photograph of an excessively worn and/or leaking active engine mount.
SERVICE INSTRUCTION:
NOTES:
Some components may be shown removed to provide extra clarity.
Some variation in the illustrations may occur, but the essential information is
always correct.
1.
Remove the undershield, (see TOPIx workshop manual section 501-02: Removal
and Installation - Engine Undershield).
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
6/13
12/4/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
2.
NOTE:
Repeat this step for the opposite side.
Inspect the active engine mount for signs of excessive wear and/or leaking fluid.
If both active engine mounts show no signs of excessive wear and/or
leaking fluid, do not continue with this technical bulletin, as the
content of this technical bulletin does not directly relate to the
customers concern. Continue to diagnose the vehicle using the TOPIx
workshop manual, (see TOPIx workshop manual section 303-00:
Diagnosis and Testing - Engine).
If any of the active engine mounts show any signs of excessive wear
and/or leaking fluid, continue to step 3.
3.
Renew both active engine mounts, (see TOPIx workshop manual section 303-01:
Removal and Installation - Left/Right Engine mount).
Do not install the undershield during this step.
Do not install the active engine mount vacuum hose to the active
engine mounts during this step.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
7/13
12/4/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
4.
Disconnect the active engine mount vacuum hose from the fasteners.
5.
Disconnect the active engine mount vacuum hose from the fasteners.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
8/13
12/4/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
6.
Disconnect the active engine mount vacuum hose from the fasteners.
7.
NOTE:
Do not pull on the active engine mount vacuum hose.
1 - Disconnect the active engine mount vacuum hose from the fasteners.
2 - Allow the active engine mount vacuum hose to reposition
downward.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
9/13
12/4/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
8.
Separate the active engine mount vacuum hose at the connector shown in the
illustration.
Remove the active engine mount vacuum hose from the vehicle.
9.
The illustration shows the active engine mount vacuum hose removed from the
vehicle.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
10/13
12/4/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
10.
Remove and discard the section of active engine mount vacuum hose.
11.
Install the section of active engine mount vacuum hose, as shown in the
illustration.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
11/13
12/4/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
12.
Remove and discard the section of active engine mount vacuum hose.
13.
Install the section of active engine mount vacuum hose, as shown in the
illustration.
14.
Reverse steps 4 to 8.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
12/13
12/4/2020
15.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
NOTE:
Repeat this step for the opposite side of the vehicle.
Install the active engine mount vacuum hose to the active engine mount.
16.
Install the under shield (see TOPIx Workshop Manual section 501-02: Removal
and Installation - Engine Undershield).
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1607072848363
13/13
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Viscosity breakdown as measured in Kurt Orbahn test on 5W...
- As measured in Seq IX test under high load/torque conditions...
- Phosphorus Replacement Technology to help extend the life of...
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes*
- Meets or exceeds the following specifications: API SP/SN...
- Or one year, whichever comes first
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: LTB01287NAS4
Replacement Service Bulletin Number:
MFR Communication Date: 2020-12-04
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.