JTB00585NAS3 Service Bulletin/Repair Instructions

12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
JTB00585NAS3
TECHNICAL BULLETIN

16 DEC 2020
© Jaguar Land Rover North America, LLC

NOTE: The information in Technical Bulletins is intended for use by trained, professional

Technicians with the knowledge, tools, and equipment required to do the job properly and

safely. It informs these Technicians of conditions that may occur on some vehicles, or

provides information that could assist in proper vehicle service. The procedures should not

be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition

described affects your vehicle. Contact an authorized Jaguar service facility to determine

whether this bulletin applies to a speciﬁc vehicle.
INFORMATION
This reissue replaces all previous versions. Please destroy all previous versions.

This bulletin supersedes TSB JTB00585NAS2/2018 dated 12 FEB 2018, which should either

be destroyed or clearly marked to show it is no longer valid (e.g. with a line across the page).

Only refer to the electronic version of this Technical Bulletin in TOPIx.

Changes are highlighted in blue
SECTION:

418-02
SUBJECT/CONCERN:

Passive Entry System Slow To Unlock
AFFECTED VEHICLE RANGE:

MODEL:

XF (X260)
MODEL YEAR:

2018
VIN:

Y53259-Y53224
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
ASSEMBLY PLANT:

Castle Bromwich

1/15
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
MARKETS:

NORTH AMERICA
CONDITION SUMMARY:
NOTE:

This bulletin affects XF models that feature passive entry without the soft close

function.
SITUATION:

The fast latch operation does not operate and there is a delay upon entry to the vehicle

using passive entry.
CAUSE:

Wiring harness design error for 2018 model year passive entry (without soft close) vehicles

only.
ACTION:

Follow the instructions below.
PARTS:
NOTES:

Repair wires, heatshrink sleeves, and splice connectors can be obtained from the

wiring harness repair kit or ordered through your parts department.

Repair wires, heatshrink sleeves, and splice connectors are supplied in packs of 10.

PART NUMBER
DESCRIPTION
QUANTITY
418279
Repair wire
4
418104
Heatshrink sleeve
4
418107
Splice connector
4
T4N9812
Door trim panel clip
38
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
2/15
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
TOOLS:

418-672

Insulation (Wire) Stripper

418-116A

Wire crimper
WARRANTY:
NOTES:

Repair procedures are under constant review, and therefore times are subject to

change; those quoted here must be taken as guidance only. Use TOPIx to obtain

the latest repair time.

The JLR claims submission system requires the use of causal part numbers. Labor

only claims must show the causal part number with a quantity of zero.

DESCRIPTION
SRO
TIME (HOURS)
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
CONDITION CODE
CAUSAL PART
3/15
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
DESCRIPTION

Passive entry - Wiring

modiﬁcation
SRO
TIME (HOURS)
CONDITION CODE
CAUSAL PART
76.96.59
2.6
JU
T2H27766
NOTE:

Normal Warranty procedures apply.
SERVICE INFORMATION:
1.
See TOPIx Workshop Manual section 418-02: Wiring harnesses - General

procedures - Wiring harness repair for information on the repair or modiﬁcation of

electrical wiring harnesses.
SERVICE INSTRUCTION 'A' - FRONT RIGHT DOOR
NOTES:

Some variation in the illustrations may occur, but the essential information is always

correct.

Removal steps in this procedure may contain installation details.

Some components shown removed for clarity.

1.
Remove the front right door trim panel (see TOPIx Workshop Manual section 501-05:

Interior trim and ornamentation - Removal and installation - Front door trim panel).
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
4/15
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
2.

Disconnect the front right door electrical wiring harness and position to the side.

3.

Remove the door window regulator retaining clip.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
5/15
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
4.

Remove the front right door closing panel.

5.

Disconnect the front right door electrical wiring harness from the front right door

latch.

Withdraw the electrical wiring harness from the front right door so it can

be modiﬁed.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
6/15
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
6.

Remove the ﬁr tree clip from the front right door electrical wiring harness.

Remove the insulation tape from the front right door electrical wiring

harness up to the retaining clip (1).
7.

Locate electrical connector C6PK10 on the front right door electrical wiring harness

and remove the sealing grommet from cavity 2.

1. Install the repair wire into cavity 2.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
7/15
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
8.

Install the repair wire to the front right door electrical wiring harness with electrical

insulation tape as shown.

1. Route the repair wire through the front right door electrical wiring loom

retaining clip.

9.

Locate the electrical connector C6PL64.

1. Locate the electrical wire in cavity 5.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
8/15
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
10.

Cut the electrical wire 150 mm from the back of the electrical connector C6PL64.

11.
NOTE:

Do not apply heat to the heatshrink at this stage.

Install a length of heatshrink onto the front right door electrical wiring harness.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
9/15
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
12.

Cut the repair wire to a suitable length and prepare the front right door electrical

wiring harness for a splice connector.

13.

Create a 2-wire splice joint between the front right door electrical wiring harness

and the repair wire.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
10/15
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
14.
WARNING:

When using a heat source, make sure that it is localized and does not cause

damage to the operator or surrounding materials.

Position the heatshrink over the splice connector and apply heat to seal the splice

connector.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
11/15
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
15.

Install the ﬁr tree clip 80 mm from the connector C6PL64 on the front right door

electrical wiring harness.

1. Wrap the front right door electrical wiring harness with insulation tape.

16.

Make sure there is 50 mm clearance between the electrical connector C6PL64 and

the insulation tape.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
12/15
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
17.

When installing the front right door closing panel, make sure to pass the door

window regulator retaining clip through the door closing panel as shown.

18.

Install the front right door closing panel.

Torque: 2 Nm.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
13/15
12/16/2020
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
19.

Install the door window regulator retaining clip.

20.
To install, reverse the removal procedure.
SERVICE INSTRUCTION 'B' - FRONT LEFT DOOR
1.
Perform Service Instruction 'A' with the following changes.

1. The connectors on the front left door electrical wiring harness are C5PK09 and

C5PL63.

2. Install the repair wire into cavity 5 of electrical connector C5PK09

3. Create a splice joint between the repair wire and the wiring in cavity 4 of

C5PL63 on the front left door electrical wiring harness.
SERVICE INSTRUCTION 'C' - REAR RIGHT DOOR
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
14/15
12/16/2020

1.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
Perform Service Instruction 'A' with the following changes.

1. The connectors on the rear right door electrical wiring harness are C8PK12 and

C8PL72.

2. Install the repair wire into cavity 2 of electrical connector C8PK12.

3. Create a splice joint between the repair wire and the wiring in cavity 5 of

C8PL72 on the rear right door electrical wiring harness.
SERVICE INSTRUCTION 'D' - REAR LEFT DOOR
1.
Perform Service Instruction 'A' with the following changes.

1. The connectors on the rear left door electrical wiring harness are C7PK11 and

C7PL72.

2. Install the repair wire into cavity 5 of electrical connector C7PK11.

3. Create a splice joint between the repair wire and the wiring in cavity 4 of

C7PL72 on the rear left door electrical wiring harness.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1608124072212
15/15

SaleBestseller No. 1

OTOFIX D1 Lite 2026 Bidirectional Scan Tool, Bluetooth OBD2 Scanner Diagnostic Tool, 2 Years Free Update, 38+ Services, CANFD & DoIP Protocols, All System Diagnoses, ABS Bleeding, Auto VIN

🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered.
🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.

SaleBestseller No. 2

OTOFIX D1 Lite Bidirectional Scan Tool with 2-Year Free Updates, 2026 New All System Automotive Diagnostic Scanner, 38+ Reset Services, FCA AutoAuth, Active Test, CANFD&DOIP, Auto VIN

🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs.
👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.

SaleBestseller No. 3

OTOFIX D1 Lite 2026 Bidirectional Scan Tool, 2 Years Free Update, 38+ Services, All System Diagnostic Scanner, Active Tests, AutoAuth FCA SGW, AutoVIN, CAN FD & DoIP, 99% Car Coverage

【2026 OTOFIX D1 Lite Gives the Best Value for Money】OTOFIX D1 Lite bidirectional scan tool is more FASTER and SMARTER with 2026 Enhanced Hardwares & New Functions! 👍Alternative Bluetooth +USB connect 👍2G+64GB 👍4x ARM Cortex-A35 (1.5GHz) Processor (5X Faster CPU) 👍Android 9.0 OS 👍5G GHz WiFi 👍CANFD&DOIP 👍 FCA AutoAuth 👍38+ Services 👍3K+ Bi-Directional Control 👍Full Systems Diagnose 👍2 Years Update 👍150+ Vehicle Coverage.
👍【Active Tests】 OTOFIX D1 Lite is a bi-directional scan tool that can send commands to, and also receive information from vehicle control modules. This way, you can quickly locate and repair faulty auto parts. For Example: send direct commands to ask the vehicle to turn on/off the radiator fan, lights, sound horn, fuel pump, modulate throttle, open/close windows, operate mirrors and more. *Note that only available tests will be displayed in the menu.
👍【38+ Service Functions】 OTOFIX D1 Lite scan tool offers 38+ of the hottest service functions that are commonly used for car repairs. That include Oil reset/SAS/EPB/BMS/Throttle/ABS bleeding, and 2065-new SUS/ADBLUE/NOX/Headlamp resets (and more) to help restore your car status after repairs are done. Compared to other diagnostic scanners for cars, the OTOFIX D1 Lite scanner is much more fully-featured. *Note that specific functions available depend on the make/model/year of your car.
👍【All System Diagnostics + Cloud Report Management】 This 2026 car scanner OTOFIX D1 Lite provides troubleshooting and data for all ECUs: read/clear DTCs, view graphic live data/VIN, and locate system faults for safe driving. With Cloud Report Management, you can save detailed reports to cloud servers and easily shared them with others via QR codes/emails/text messages. Others can access these reports from any device (smartphones/tablets/PCs …) anytime, and you can better manage repair work.
👍【99% Car Coverage】 This one-station car scanner diagnostic for all cars works on 150+ major car brands across the world. 1) It supports CAN-FD/DoIP protocols: compatible with GMCAVALIER/TRAX/Encore/Envision/GL8(LSY)/CT4/CT5 after 2019; Volvo after 2018; Land Rover/Jaguar after 2017; and BM.W F/G all chassis. 2) For models equipped with security modules (such as Renault & 2018+ FCA SGW), its built-in AutoAuth allows you to easily break diagnostic barriers after registration.

This product presentation was made with AAWP plugin.

Last update on 2026-05-13 / Affiliate links / Images from Amazon Product Advertising API

Buffer Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads Bluesky Copy Mastodon Nextdoor