NHTSA ID Number: 10185316
Manufacturer Communication Number: SSM75173
TSB/Document Date: 2021-01-08
Summary
Air Conditioning operating Intermittently.
Special Service Message
NOTE: A Special Service Message is a formal communication issued by Jaguar
and carries the
same importance of a Technical Service Bulletin. An SSM is a quick method of communicating
"Need To Know" information to the technical service community. SSM's may be issued in advance
of a technical bulletin or may be the only communication on a given topic. All information
contained in Jaguar
technical communications are intended for use by trained, professional
technicians with the knowledge, tools, and equipment required to complete the procedure
correctly and safely. It informs the Technicians of conditions that may occur on some vehicles, or
provides information that could assist in correct vehicle and diagnostic service.
SSM 75173 - Air Conditioning operating
Intermittently. (PHEV – Electric AC Compressor
only)
Models : E-Pace / X540
F-Pace / X761
Engineer :Shilvock Matthew
Date Last 08 DEC 2020 12:46:29
Updated :
Content :X761 PHEV – 21MY
X540 PHEV 21MY
Note:
This failure mode can manifest intermittently. Correct diagnosis using the
detailed procedure below can only be achieved when the vehicle / Air
Conditioning system is inoperative.
Issue:
Electric Air Conditioning compressor can be inhibited as designed by a Low
System Power Inhibit. This will cause Air Conditioning to operate intermittently
causing no cabin cooling.
Cause:
The Low System Power Inhibit is set by the Vehicle Supervisory Controller (VSC)
which is part of the Powertrain Control Module (PCM). The Inhibit is set when
there is less than or equal to 500 watts of power available to the Climate
System. Climate Power will be cut resulting in the Electric Air Conditioning
compressor being disabled. This is not a climate control issue and the fault will
lie in another system.
Action:
Carry out an Autoscan DTC read with Pathfinder and check for any associated
DTC’s stored and refer to TOPIx. In particular HVAC module, PCM and all High
Voltage modules. If a DTC is stored in HVAC then please refer to TOPIx and
repair. If there are NO DTC’s stored in HVAC module then please proceed to
carry out the following Live data reads.
Live Data DID Reads 9A51 – Electric AC Compressor Inhibits
9801 – AC Compressor Run In Status
988B – Climate Hybrid
Component Status
98E1 – AC Compressor Inlet Pressure
9990 – AC System Pressure
Check results of DID 9A51 for any listed Electric AC Compressor Inhibits as
shown below. If an Inhibit is shown as YES for Low System Power (See picture
attached) then the issue is not HVAC and will require further diagnosis
& investigation.
Important Note:
The Low System Power inhibit will not be present when Air Conditioning is
functional and operating correctly. When the Air Conditioning is in a failed
state, the Electric Air Conditioning Compressor has been disabled due to Low
System Power available and there is no Cabin Cooling the Low System Power
inhibit MAY then be present and display YES as shown above.
When Live Data readings have been recorded, please create a .pdf file, raise a
TA and attach the pdf to the TA documenting tests that have been conducted.
Diagnostic Procedure:
CAUTION: This procedure requires a minimum of Pathfinder version 305 or
later.
NOTE:
The Jaguar
Land Rover
(JLR) approved diagnostic equipment will read the
Vehicle Identification Number (VIN) for the vehicle and automatically take
the vehicle out of ‘Transportation mode’ if required.
Procedure:
1. Connect the JLR approved battery support unit.
2. Connect the JLR approved diagnostic equipment to the vehicle and
begin a new session.
Follow the JLR approved diagnostic equipment prompts.
3.
Replicate FAILED STATE with Air Conditioning inoperative.
4.
Engine running in Power Mode 7 and ‘READY’ displayed in instrument
cluster.
5.
Select ‘MAX AC’ on climate control panel.
6.
Select ‘ECU Diagnostic’
7.
Select ‘HVAC Control Module (HVAC)’
8.
Select ‘Live Data’
9.
Select the following ‘DID’s’
9A51 – Electric AC Compressor Inhibits
9801 – AC Compressor Run In Status
988B – Climate Hybrid
Component Status
98E1 – AC Compressor Inlet Pressure
9990 – AC System Pressure
10. Create pdf file
11. When all of the tasks are complete, exit the session.
12. Disconnect the JLR approved diagnostic equipment and the
JLR approved battery support unit.
13. Raise Technical Assist (TA)
A Technical Assistance (TA) should be submitted to Local Technical Support
(LTS) documenting all of the above checks and results also attaching the pdf
file of the DID results.
Version : 1
Attachments : Low System Power Inhibit.pdf
Jaguar
Land Rover
Limited 2000 - 2020 (Rel. 2685)
- R134a Replacement - Hydrocarbon blend that is 100% natural...
- 6oz (11.7 fl oz) Cans - Compressed gas is measured by...
- SSV Cans - Self Sealing Valve allows for the storage of...
- Disclosures - Product is flammable like many other modern...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SSM75173
Replacement Service Bulletin Number:
MFR Communication Date: 2020-12-08
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission
, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford
, for Lincoln
, and for Mazda
ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission
) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities. - 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




