KC-424 Service Bulletin/Repair Instructions

1/4/2021
Content creation stages KC-424
Volvo VN Models Equipped With Bendix Brakes,

Bendix S-Cam On Steer Axle - Excessive Brake

Noise; FSB 514-001, Brake S-Cam, Replacement

:


Internal Content
The current version of FSB 514-001 can be found in Impact under the

Service tab.
Related links and

attachments

No links or

attachments available
• The Operation can be found under Function Group 514,

Operation 5143-03-09-01 FSB 514-001, Brake S-Cam, Replacement.

• If the article does not appear when searched with either VIN or Chassis

information entered, search by model:

1. Clear any chassis information from the Search box.

2. Select or enter the correct model.
3. Set the Function Group to 514 and make sure Info Type is set to All

Service Information.
4. Press the Search button. A list of operations will appear in the results

window. Choose the correct article.

https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD1?pyActivity=%40baseclass.pzProcess…
1/3
1/4/2021
Content creation stages KC-424
5. A box will display with applicable models. Select the correct chassis

description.

• Note: At the time of this Solution's publication, there is only one option

in the chassis description menu as seen below.
Tags
a
https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD1?pyActivity=%40baseclass.pzProcess…
2/3
1/4/2021
Content creation stages KC-424
Tags
a

S-CAM

FSB 514-001
BRAKE NOISE

BENDIX
BRAKE SQUEAL

K65385571
Feedback

Give feedback to help improve the content of this article
https://volvo-trkna-prod1.pegacloud.net/prweb/PRAuth/iNPUIKpeinqPJi2G0hH930k43USdE1gb*/!TABTHREAD1?pyActivity=%40baseclass.pzProcess…
3/3
IMPACT 4.07.82
1/4/2021
FSB 514-001, Brake S-Cam, Replacement

(June 2018)

Some Mack CHU, CXU, PI and AN trucks built after 05/13/2013, equipped with Bendix Brake S-Cams on the steer axle

may require replacement to reduce or eliminate brake noise during braking. The replacement procedure includes

installation of a new tuned brake S-Cam shaft, spring & roller kit, and seal & shim kit. Follow the S-Cam replacement

procedure outlined in this Field Service Bulletin (FSB).

Note: For replacement, use the 10 spline Brake S-Cam shaft for trucks built from 05/13/2013 to 07/09/2017. See

reference image of 10 spline brake S-Cam (1) in figure below.

Note: For replacement, use the 28 spline Brake S-Cam shaft for trucks built after 07/10/2017. See reference image of

28 spline brake S-Cam (2) in figure below.

Note: This bulletin does not apply to MACK Trucks Australia.
Bendix Tuned S-Cam Description

Note: The Bendix Tuned S-Cam shaft is “Only” designed to reduce/or eliminate brake noise heard within the 1200 to

1500 Hertz frequency range. Submission of a video or audio file with the tech support case will assist in the diagnosis

of any brake noise concern.

The Bendix Tuned S-Cam is designed to reduce and/or eliminate brake noise heard within the 1200-1500 Hertz

frequency range. Although the tuned S-Cam may help reduce brake noise heard in other frequency ranges, it is only

designed to effectively reduce the noise range between 1200-1500 Hz. Proper installation and clearance of the Bendix

tuned S-Cam is very important. To ensure the best results in noise reduction follow all steps within this FSB. Below is

an example Hertz graph of the Bendix brake noise.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
2 / 24
IMPACT 4.07.82
1/4/2021
Verifying Noise

A Tech Support/E-Service case will need to be submitted to verify that the Bendix brake noise is within the Frequency

Range that the new tuned S-Cam is designed to correct. To verify the Bendix brake noise the truck may need to be test

driven and the front steer axle brakes heated up to 300° Fahrenheit then let cool to 150° Fahrenheit. Most Bendix

brake noise complaints can be duplicated after brakes are heat cycled and then test driven using 15-25 psi brake

applications. Tech Support may ask that a video or sound file be taken and uploaded to the case for verification. A valid

Tech Support/E-Service case number will be needed when ordering parts.
Parts Ordering

To schedule parts orders and repairs, please call (877) 986-5862 with a valid Tech Support/E-Service case number

and VIN number of the vehicle in need of this repair.

Note: Example Tech Support/E-Service Case Number (1-XXXXXXXXXX).
10-Spline Camshaft (For Trucks Built From

05/13/2013 to 07/09/2017)

Item
Description
Part

Number
Qty
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
3 / 24
IMPACT 4.07.82
1/4/2021
1
Camshaft, Tuned Mass, 85150135

CW, 10SPLINE
1
2
Camshaft, Tuned Mass, 85150134

CCW , 10SPLINE
1
3
Spring Kit
85153537
2
4
Hardware Module Kit
85153464
1
28-Spline Camshaft (For Trucks Built From

07/10/2017)

Item
Description
Part

Number
Qty
1
Camshaft, Tuned Mass, 22880282

CW, 28SPLINE
1
2
Camshaft, Tuned Mass, 22880283

CCW , 28SPLINE
1
3
Spring Kit
85153537
2
4
Hardware Module Kit
85153464
1
Decommissioning the Truck for Repair
You must read and understand the precautions and guidelines in Service Information, group 50, "General Safety

Practices, Brakes" before performing this procedure. If you are not properly trained and certified in this procedure, ask

your supervisor for training before you perform it.
NOTE: Information is subject to change without notice. Illustrations are used for reference only and can differ slightly

from the actual vehicle being serviced. However, key components addressed in this information are represented as

accurately as possible.

Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
4 / 24
IMPACT 4.07.82
1/4/2021
1. Park the vehicle on a flat and level surface.

2. Apply the parking brake.

3. Place the transmission in neutral or park.

4. Install the wheel chocks.
5. Disconnect the cable from the battery’s negative terminal.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
5 / 24
IMPACT 4.07.82
1/4/2021
Brake S-Cam Removal

Note: The left side is shown for instructional purposes.

1. Lift the steer axle with a jack, place the truck on jack stands, and remove the jack.

2. Remove the wheel nuts.

Note: Before removing the wheel, mark the end of one wheel stud with a paint marker and mark the wheel at the

stud to ensure the wheel is reinstalled in the same position.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
6 / 24
IMPACT 4.07.82
1/4/2021
3. Remove the wheel.
4. With the wheel removed, match mark the drum to the wheel stud to ensure the drum can be reinstalled in the

same position.

5. Mark the brake shoes to ensure they can be reinstalled in the same position (top or bottom).

Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
7 / 24
IMPACT 4.07.82
1/4/2021
5.

6. If applicable, remove the slack adjuster pawl.
7. Back off of the brake (slack adjuster).

Note: The Meritor slack adjuster is shown in this procedure for backing off the brakes. However, this procedure

is similar for other brands.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
8 / 24
IMPACT 4.07.82
1/4/2021
8. Remove the brake drum.

Note: Clean the brake drum of any dust or debris and store for installation.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
9 / 24
IMPACT 4.07.82
1/4/2021
9. Remove the brake shoes, brake springs, and rollers.

Note: Clean the brake shoes of any dust or debris and store for installation.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

10.

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
10 / 24
IMPACT 4.07.82
1/4/2021
10. Loosen the two nuts securing the brake chamber to the cam tube mounting bracket.
11. For Haldex slack adjusters, remove the fasteners securing the slack adjuster to the cam tube mounting bracket.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

12.

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
11 / 24
IMPACT 4.07.82
1/4/2021
12. Remove the snap ring and washers securing the slack adjuster to the brake S-Cam.
13. Remove the four nuts and washers securing the cam tube to the brake spider.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

14.

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
12 / 24
IMPACT 4.07.82
1/4/2021
14. Remove the brake S-Cam by pulling the S-Cam clear of the cam tube and brake spider.

Note: Remove brake S-Cam head washer (2) from the removed S-Cam (1). Clean the head washer and store it

for reuse.
15. Follow steps 2 through 14 for the right side of the truck.
Brake S-Cam Installation

Note: The left side is shown for instructional purposes.

1. Inspect the cam tube. Ensure the grease seals and bushing are good.

Note: Replace the grease seals and/or bushings if needed.

2. Retrieve the stored S-Cam head washer (2) and install it on the replacement S-Cam (1) in the proper direction.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
13 / 24
IMPACT 4.07.82
1/4/2021
3. Lube the replacement S-Cam before installing it in the cam tube.

4. Position the S-Cam in the cam tube and slide it into the brake spider.
5. Install the four nuts securing the cam-tube and brake S-Cam to the brake spider.

6. Tighten the four nuts to 75 ft-lbs (102 N m).
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
14 / 24
IMPACT 4.07.82
1/4/2021
7. Properly position the slack adjuster on the replacement S-Cam.

8. Install the shim washer on the S-Cam, slack adjuster, and shim S-Cam to set the lateral end play 0.127 – 0.635

mm (.005-.025 in).

9. Install the E-clip.

Note: Ensure the E-clip is in the groove at the end of the S-Cam.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
15 / 24
IMPACT 4.07.82
1/4/2021
10. Measure the cam bushing play.

Note: The maximum S-Cam bushing vertical end play permitted is (0.035 in).

11. Tighten the two nuts securing the brake chamber to the cam tube mounting bracket.

Note: On the first pass, tighten the two nuts to 34 Nm (25 ft-lb).

Note: On the second pass, tighten the two nuts to 180 – 210 Nm (133 – 154 ft-lb).
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
16 / 24
IMPACT 4.07.82
1/4/2021
12. For Haldex slack adjusters, install the fasteners securing the slack adjuster to the cam tube bracket.

13. Tighten the slack mounting strap fastener to 11 – 16 Nm (8 – 12 ft-lb).
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
17 / 24
IMPACT 4.07.82
1/4/2021
14. Using a grease gun, grease the cam tube and slack adjuster until they purge.

Note: Ensure the grease seal at the S-Cam head does not leak. If it does leak, replace the seal.

15. Pre-lube the rollers and anchor pin pockets on the brakes before installing brake shoes.

16. Install the brake shoes, springs and rollers in the same position (top or bottom) as previously recorded.
17. Install the brake drum as previously recorded on the drum and wheel stud during the removal procedure.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
18 / 24
IMPACT 4.07.82
1/4/2021
18. Install the wheel using the reference marks made on the wheel and the wheel stud during the removal

procedure.
19. Install the wheel nuts.

20. Tighten the wheel nuts to 610 Nm (450 ft-lb).

Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
19 / 24
IMPACT 4.07.82

20.
1/4/2021
21. Adjust the brake as recommended per (slack adjuster) manufacturer.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
20 / 24
IMPACT 4.07.82
1/4/2021
22. If applicable, install the slack adjuster pawl.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
21 / 24
IMPACT 4.07.82
1/4/2021
23. After brake the adjustment, rotate the wheel and ensure the brake is not dragging or the drum is not out of

round.

24. Repeat steps 1 through 21 for the right side of the truck.

25. Lift the steer axle with a jack, remove the jack stands, and lower the axle.

26. Go to Commissioning the Truck for Operation.
Commissioning the Truck for Operation

1. Connect the battery cable to the negative (ground) terminal.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
22 / 24
IMPACT 4.07.82
1/4/2021
2. Remove the wheel chocks.
Reimbursement

This repair may be eligible for
UCHP
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
23 / 24
IMPACT 4.07.82
1/4/2021
reimbursement if a product failure Reimbursement

was experienced within time and

mileage limits of the applicable

Warranty coverage.

Reimbursement is obtained via

the normal claim handling

process.

Claim Type (used only when

uploading from the Dealer Bus.

Sys.)
01
Labor Code

Primary Labor Code (Brake

S-Cam, Replacement)
5143-03-09-01

3.0 hrs.
Causal Part
85137267
MACK Trucks North America reserves the right to make any changes in design or to make additions to or upon its

products without incurring any obligations to install the same on vehicles previously built.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by

the Volvo Group

The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
24 / 24

Bestseller No. 1

KINGBOLEN Ediag Elite OBD2 Scanner Bluetooth, Bidirectional Test Scanner All System Diagnostic Tool for iOS & Android, 15+ Hot Reset, CANFD Protocol, FCA AutoAuth, No Subscriptions Lifetime Update

OBD2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15+ reset service, bidirectional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth OBD2 scanner diagnostic tool ideal for DIY's and private car owners.
Bidirectional Test for Quickly Locating Problems: The Bidirectional Scan tool allows you to send commands directly from your smartphone to your vehicle for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping DIY users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
15+ Maintenance Resets: The current version introduces 15+ popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us check compatibility.
Wide Compatibility CANFD & FCA Autoauth: Compatible with GM, Ford, Toyota, Chrysler, Honda, Mazda, Nissan, Mitsubishi, Hyundai, KIA with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us to confirm compatibility before purchase.
Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent Auto VIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time data. Data logging/reporting is available for playback and further analysis

SaleBestseller No. 2

KINGBOLEN K7 Bidirectional Scan Tool 2026 OBD2 Scanner Bluetooth with Lifetime Updates, No Annual Fees, 31+ Resets, Component Matching, All System Diagnostic, CAN FD, FCA AutoAuth, Crankshaft Relearn

No Annual Fees & 2026 Upgraded CAN FD: Why pay $199/year or more for updates? The 2026 newest Kingbolen K7 obd2 scanner features have been upgraded to Lifetime Updates without subscription fees, saving you significant costs in the long run. K7 scan tool also adds the CAN FD protocol for the latest GM models (2019+), enabling faster data transfer, reducing the risk of undetected errors
2026 Newest Top-tier Car Scanner: Kingbolen K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Test, ECU Online/Offline Code, 31+ Resets, PMI for Ford, Lincoln, Mazda, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA AutoAuth
OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with Auto Vin can do one-click to scan ECUs on most of vehicles, like pcm, ecm, eps, bcm, tpms, sas, a/c system... to read/clear code, view live data, freeze frame, read ecu info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
Bidirectional Test/Active Test & ECU Code: Stop guessing and start fixing. Bidirectional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to save money and time on car repairs when performing complex maintenance and repair
31 Reset Functions: Avoid expensive dealership visits for simple services. Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional diagnostic scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Code, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. Note: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase

SaleBestseller No. 3

KINGBOLEN OBD2 Scanner S608, 2026 Bidirectional Scan Tool for ABS/SRS/Transmission/Engine, 9 Resets Oil Brake DPF Bleed Gear Injector Throttle BMS SAS, CAN FD & FCA/Renault SGW, Lifetime Free Update

WHY S608 STANDS OUT:2026 Kingbolen S608 is the only scanner <200 bucks that offers powerful active tests on Engine, ABS, SRS, and Transmission systems. Offers 9 resets,Covers 110+ global brands with a 6.2'' larger touchscreen
KINGBOLEN'S NEW BIDIRECTIONAL SCAN TOOL: As the 2026 upgraded version of S600, our Newest S608 obd2 scanner has the powerful Bi-directional Control on Engine, ABS, SRS, and Transmission systems. It can send commands to the ECUs of actuators for functional tests and work status checks, such as ABS, fuel injectors, adjusting throttle, coolant pumps, EVAP test, fuel trim reset, etc. No more Guesswork. Quickly identify problem components without teardown, get fuss-free results in seconds.
【9 HOT RESET SERVICES CAR SCANNER】Tired of costly mechanic trips for common resets? The Kingbolen S608 obd2 scanner lets you do it yourself, even for beginners—quickly and effortlessly! It offers 9 hot reset functions: Oil/EPB Reset, ABS Bleeding, SAS Calibration, DPF Regeneration, Injector Coding, BMS Matching, Throttle Adaptation, Gear Learning. Stop paying mechanics for 5-minute jobs. Save hundreds per year! 🚗*Function vary from vehicle models. reach us to check compatibility firstly!
【4 SYSTEM DIAGNOSTIC TOOL + FULL OBDII FUNCTIONS】Kingbolen S608 is an OBDII scanner and 4 systems diagnostic tool made for home mechanics, DIYers, and professionals. You can access Engine, ABS, SRS, Transmission fault codes, track live data in graphs, and onboard DTC library lookup to find the right troubleshooting procedure, and diagnose with full 10 OBD2 test modes to fix most of emission issues. Give your aging cars routine maintenance to avoid costly repairs, a breakdown, or even a crash.
【NEW CAN FD, FCA/RENAULT SGW, 140+ BRANDS】Kingbolen S608 scanner for car supports 140+ vehicle brands, 100,000+ models, 28 languages and can be used worldwide. S608 stays up-to-date with modern vehicles, allows secure access to 2017+ FCA cars and 2015+ Renault cars (📢*Need to purchase an AutoAuth/Renault account by yourself), and supports the latest CAN-FD protocol for 2019+ GM/Chrysler, enabling 2X faster data transfer and more precise diagnostics. 🚗*Check compatibility before purchase.

This product presentation was made with AAWP plugin.

Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API

Buffer Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads Bluesky Copy Mastodon Nextdoor