NHTSA ID Number: 10183780
Manufacturer Communication Number: 060089026Q
TSB/Document Date: 2020-12-07
Summary
This warranty administration bulletin provides information on Warranty Administration - Customer Concern Not Duplicated (CCND) Labor Operation Numbers.
Service Bulletin
Bulletin No.:
Date:
06-00-89-026Q
October, 2020
WARRANTY ADMINISTRATION
Subject:
Warranty Administration – Customer Concern Not Duplicated (CCND) Labor Operation
Numbers
Models:
2021 and Prior GM Passenger Cars and Trucks (Except Chevrolet
Low Cab Forward
Medium Duty Models)
Attention: This bulletin also applies to any of the above models that may be Export from North
America vehicles.
This bulletin has been revised to add the 2021 Model Year, update information under
Example of Proper Usage for Labor Operations 6629959 and 6639959 and remove the Labor
Time Guide statement at the bottom of the table. Please discard Corporate Bulletin Number
06-00-89-026P.
Below is list of the labor operations and descriptions for
"Customer Concern Not Duplicated/Verified" (CCND)
conditions and guidelines and examples for using them.
For complete policies involving the use of CCND labor
operations, please refer to the GM Service Policies &
Procedures Manual.
Customer Concern
Not Duplicated
Labor Operations
Numbers
Description
Example of Proper Usage
0559929
Air/Wind Noise
Customer states there is a wind noise from the windshield
area. Performed related system verification procedure in
SI with no trouble found and unable to duplicate customer
concern.
0569929
Waterleaks
Customer stated water was leaking from the sunroof
area, followed SI diagnostics for waterleaks and was
unable to duplicate the customer concern.
1049929
Interior Buzz/Squeak/Rattle
Customer states there is a rattle from the driver door
when it is closed. Performed related system verification
procedure in SI with no trouble found and unable to
duplicate customer concern.
2069939
Keyless Entry/Theft Alarm/Memory Seats/
Lighting/Power Windows
Customer states the keyless entry transmitter does not
operate. Performed related system verification procedure
in SI with no trouble found and unable to duplicate
concern.
Copyright 2020 General Motors LLC. All Rights Reserved.
Page 2
October, 2020
Customer Concern
Not Duplicated
Labor Operations
Numbers
Description
2419919
Brakes (Antilock Brake System)
2429919
Brakes (Disc Brakes)
2439919
2449919
3019959
Driveline/Axle (Front Drive Axle)
3029959
Driveline/Axle (Propeller Shaft)
3039959
Driveline/Axle (Rear Drive Axle)
3049959
Driveline/Axle (Wheel Drive Shafts)
Bulletin No.: 06-00-89-026Q
Example of Proper Usage
Customers states ABS / TCS / Stability Control light
came on, but now it’s off. Scan tool shows history code.
Cleared code, followed system verification with no trouble
found and unable to duplicate concern.
Customers states driveline noise, vibration or intermittent
All Wheel Drive Light On. Followed SI procedures to
identify driveline noise / vibration or cause of the AWD
indicator and unable to duplicate concerns.
3429919
Customer states that OnStar® will not connect to an
advisor. Performed related system verification procedure
in SI with no trouble found and unable to duplicate
concern.
3429969
Entertainment/Radio/Navigation/USB/
Bluetooth
Customer states sound from the rear speakers pops or
distorts. Performed related system verification procedure
in SI with no trouble found and unable to duplicate
concern.
4029929
Engine CCND - Engine Controls and Fuel
Customers states engine light was on with a fuel related
DTC, followed system verification procedure for DTC as
indicated and unable to duplicate the concern.
4039949
Engine Cooling
Customer states engine is overheating. Performed
related system verification procedure in SI with no trouble
found and unable to duplicate concern.
Engine Electrical
Customer states vehicle would not start/crank. Performed
related system verification procedure in SI with no trouble
found and unable to duplicate concern.
Note: Use 4041512 for battery charge & test.
12V Battery / 12V Charging System
Customer states vehicle would not start/crank. Performed
related system verification procedure in SI with no trouble
found and unable to duplicate concern.
Note: Use 4041512 for battery charge & test.
4059959
Customer is not satisfied with exhaust, either a boom,
tone, etc., followed exhaust noise diagnosis with no
trouble found and unable to duplicate concern.
Determined exhaust is no different from other like
vehicles.
4069919
Engine CCND – Engine Mechanical
Customer states engine making abnormal noise or
leaking fluid, followed SI diagnosis for noise or leaks and
was unable to duplicate customer concern.
4429959
4439959
4049939
4049979
Customer states A/C system not cold enough. Performed
system verification for A/C system. Temperature is found
to be within specifications.
5019989
Hybrid Electronics & Hybrid Charging
Customer states vehicle will not charge at home charging
station, Performed related system verification procedure
in SI with no trouble found and unable to duplicate
concern.
5029989
Hybrid/EV Cooling System Plumbing
Customer states there is a leak from the cooling system,
followed SI diagnosis for leaks and was unable to
duplicate customer concern.
Electronics/Safety/Object Detection
Customer states the Lane Departure Warning Indicator
illuminates when going around a corner. Followed SI
diagnostics for Lane Departure Warning System
Malfunction and was unable to duplicate the customer
concern.
6429919
Bulletin No.: 06-00-89-026Q
Customer Concern
Not Duplicated
Labor Operations
Numbers
October, 2020
Page 3
Description
Example of Proper Usage
Electronics/Airbags
Customer states the keyless entry transmitter does not
operate. Performed related system verification procedure
in SI with no trouble found and unable to duplicate
customer concern.
Driver Monitoring
Customer states that Super Cruise is not engaging as
they would expect or the steering wheel mounted light bar
flashes green too often. Performed Adaptive Cruise
Control Malfunction diagnostics in SI and no trouble
found and unable to duplicate customer concern.
Driver Assistance Systems
Customer states issues with Active Safety related
features including Forward Collision Alert / Lane Keep
Assist / Adaptive Cruise Control / Side Blind Zone Alert /
Viewing Cameras. Performed related system verification
procedure in SI with no trouble found and unable to
duplicate customer concern. This labor code is not
intended to be used for any Passive Safety issues.
6639959
Parking Assistance Systems
Customer states Advanced Park Assist fails to identify
some parking spots or ultrasonic parking sensors fail to
operate properly. Performed related system verification
procedure in SI with no trouble found and unable to
duplicate concern.
7029929
Seat Heating and Cooling/Hardware. Trim
and Upholstery/Power Seat
Customer states the driver front seat heater will not warm
up. Performed related Front Heated Seat Malfunction
procedure in SI with no trouble found and unable to
duplicate customer concern.
7429949
7439949
Steering (Steering Linkage)
7449949
Steering (Steering Wheel and Column)
8009929
6459939
6619959
6629959
8019929
Suspension (Automatic Level Control)
8029929
Suspension (Electronic Suspension Control)
8039929
Suspension (Front Suspension)
8049929
Suspension (Rear Suspension)
8079929
Suspension (Wheel Alignment)
Tire Pressure Monitoring System (TPMS)
8059949
(For Tire and Wheel Concerns See 8069939)
Customer states steering noise / whine when turning at
parking lot speeds at cold temperatures. Followed SI
procedures and was unable to duplicate.
Customer states front suspension noise over bumps.
Followed SI procedures to diagnose front suspension
noise and was unable to duplicate concern.
Customer states pressure value for one tire is not
displayed on DIC. Performed related system verification
procedure in SI with no trouble found and unable to
duplicate concern.
8069939
Tires and Wheels (For Tire Pressure
Monitoring System Concerns See 8059949
Customers states a tire vibration accompanied by a
thumping noise is heard at highway speeds. Road tested
and checked tire balance. Unable to duplicate concerns.
8429939
Transfer Case
Customer states vehicle does switch between 2 and 4
wheel drive, followed SI diagnostics for transfer case and
was unable to duplicate customer concern.
8439919
Customers states the clutch does not engage properly
when shifting, followed SI procedures for clutch feel and
was unable to duplicate customer concern.
8449929
Customs states the vehicle does not shift properly,
followed SI diagnostics for shift problems and was unable
to duplicate the customer concern.
8469959
Automatic transmission
Customer states the vehicle does not shift properly,
followed SI diagnostics for shift problems and was unable
to duplicate the customer concern.
Page 4
October, 2020
Notice: In some cases the subject vehicle may be
operating as intended but not in line with the
expectations of the customer. In cases where the
vehicle is operating as intended but not in line with
customer expectations, service management is
strongly encouraged to submit a Field Product Report
(Product Information Report for Canada). Refer to the
latest version of Corporate Bulletin Number
02-00-89-002 (10-00-89-006 for Canada) for additional
information on how to submit a field product report.
Clarification Regarding Use of CCND Engine
Mechanical
• 4069919 – Engine CCND – Engine Mechanical
Customer reports engine concern. Service
technician collects relevant operating and
environmental conditions from customer during
concern event and attempts to replicate/mitigate
concern. Technician evaluates ECM for any
engine diagnostic trouble codes and follows fault
tree for any identified P-code(s). Technician
investigates any pending Product Information and/
or Product Bulletins that may apply to the
customer concern. Service technician is unable to
•
Bulletin No.: 06-00-89-026Q
reproduce concern, confirms there are no pending
product information bulletins and is unable to
identify a problem with the vehicle. This labor
operation should not be used for a MIL active
complaint or non-engine related issues.
4029929 – Engine CCND – Engine Controls
and Fuel
This labor operation should only be used for
engine malfunction indicator lamp concerns when
the technician is unable to identify a problem and/
or duplicate the concern. An engine diagnostic
trouble code (Pxxxx code) must be identified in the
ECM to use this labor operation. The diagnostic
trouble code(s) should be documented on the
technician copy of the repair order. The service
technician should follow the fault tree for the
identified P-code(s) and investigate any pending
Product Information and/or Product Bulletins that
may apply to those code(s). 4029929 labor
operation should not be used for the P0700 DTC.
P0700 is specific to the transmission system must
be applied to a transmission labor operation.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these
technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper
service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a
job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your
vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the
information.
WE SUPPORT VOLUNTARY
TECHNICIAN
CERTIFICATION
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 060089026Q
Replacement Service Bulletin Number:
MFR Communication Date: 2020-10-09
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.