SERVICE ADVISORY
Release Date: October 01, 2020
Expiration Date: December 01, 2021

IND

Communication #: ISA-20-03
Model Year(s): 2018-2020

— Confidential and Proprietary —

VERSION: R02 (November 05, 2020)
**Adding 2018 Stage 3 & 2019 Motorcycles **
IMPORTANT
If you are working with a printed copy, please verify you have the most current version of this document.

S U B J E C T : E C U C A L I B R AT I O N R E F L A S H
PURPOSE
Indian Motorcycle has identified a potential calibration issue affecting some 111/116 c.i. motorcycles. In some
instances, the throttle twist grip and Electronic Throttle Control (ETC) position signals do not align with the predicted
position within the ECM and set a P1530 fault (throttle plausibility). When active, the P1530 fault causes the motorcycle
to operate in a reduced power (limp) mode.
To address this, Indian Motorcycle is releasing updated calibrations. Calibrations for all model year 2020 111/116 c. i.
North America motorcycles were released on 10/1/20. With this update, the International calibrations for model years
2019 and 2020 are available. Calibrations for all model year 2019 North America motorcycles are also available, along
with 2018 Stage 3 motorcycles.
Calibrations for prior model years are currently under development. This Service Advisory will be updated to
communicate their release when available.

AFFECTED MODELS
MODEL YEAR
2018 stage 3
motorcycles

MODELS

VEHICLE IDENTIFICATION NUMBER
RANGE

All Chief, Chieftain, Springfield,
Roadmaster, and Vintage Models

Reference Unit Inquiry on the dealer website
or the Service Communications list on the
STOP site to lookup affected VINs.

2019, 2020

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
ISA-20-03 (R02)

© 2020 Polaris Inc.

Page 1 of 4

WA R R A N T Y C L A I M PA R T S I N F O R M AT I O N
2020 INDIAN MOTORCYCLE (111 CI / 116 CI)
Advisory #

ISA-20-03

Claim Type

SA (Service Advisory)

Labor Allowance

0.3 hours (18 minutes)

Part Number / Description

0000541 (QTY 1) Bulletin Misc Labor

Parts Availability

NA

University of Polaris Video
Training Required

NO

COVERAGE PERIOD
Coverage began on October 01, 2020. Coverage will expire on December 01, 2021.

FEEDBACK FORM
A feedback form has been created for the technician to provide Polaris with an overall
satisfaction rating for the instructions, provide comments on your experience or upload
pictures/video. This feedback form is viewable on a mobile device by scanning the QR code
or by clicking HERE if viewing this document electronically.

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
ISA-20-03 (R02)

© 2020 Polaris Inc.

Page 2 of 4

ECU REPROGRAMMING PROCEDURE
1. Verify that Digital Wrench version 4.2 Update 11/03/
2020 or later has been installed on your PC or laptop
and proceed to step 6.

5. Download and install Digital Wrench Version 4.2 –
Update 11/03/2020 or higher.

If you do not have Version 4.2 – Update 11/03/2020
or later installed, you must first download it
before proceeding with the reflash.
NOTICE
If you do not have Digital Wrench installed on your
computer, you must first download the Digital Wrench
Base Version Installer (STEP 2).
2. To download Digital Wrench Base Version, go to your
dealer homepage and select Digital Wrench Base
Version Installer from the Service and Warranty
dropdown menu and download.

6. Connect SmartLink / MultiLink XP cables to PC and
vehicle.
7. Open the Digital Wrench program.

NOTICE
International Subsidiaries and Distributors use the
Digital Wrench Subscriptions link to purchase and
update your digital wrench software.
3. Once the Base Version is installed, go to your dealer
homepage and select Digital Wrench Updates from
the Service and Warranty dropdown menu.

8. Select the model year, product line, and vehicle
description by selecting the “Change Vehicle Type”
icon .
9. Select the Special Test Tab q.

4. Click on Digital Wrench Version 4.2 Updates.
10. Select Vehicle Controller Update w.

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
ISA-20-03 (R02)

© 2020 Polaris Inc.

Page 3 of 4

IMPORTANT
Use of Engine Controller Reprogramming instead of
Vehicle Controllers Update will result in loss of stage
calibration.
NOTICE
Digital Wrench will automatically identify current
software levels and determine which modules require
software updates.
IMPORTANT
Make sure the vehicle battery is fully charged or
connected to a battery charger before proceeding.
STAGE CALIBRATION: If a motorcycle is equipped
with an Indian Motorcycle stage calibration, Digital
Wrench will identify and maintain the upgraded
software calibration.
CAUTION
The VCM update procedure will take you through TWO
separate reprogramming procedures.
• Boot Mode
• Reflash Application
During the reflash process the gauge and all indicators
will power down. Each procedure must be completed in
sequence or the VCM will not function.
11. Follow the on-screen prompts until all control
modules have been updated.
12. Once the flash is complete, hit the continue button
and leave Digital Wrench connected and ignition
powered ON. Do NOT touch the unit for 35 seconds.
13. Power ignition off and wait 130 Seconds.
14. Check / clear any stored fault codes, disconnect
Digital Wrench and test ride the motorcycle.
15. File a SA claim for Indian Motorcycle® ISA-20-03.

The information contained within this document is confidential and protected by U.S. and international copyright laws, and is the property of Polaris Inc. This document is
provided for the sole use of authorized Polaris dealers and distributors. This document is not to be distributed, duplicated, or copied, digitally or otherwise, without the
written consent of Polaris Inc.
ISA-20-03 (R02)

© 2020 Polaris Inc.

Page 4 of 4