NHTSA ID Number: 10183364
Manufacturer Communication Number: KC-2020
TSB/Document Date: 2020-12-01
Summary
Diagnostic Trouble Codes P029900 Or P226C00 With Possible P115100 - US17+OBD19 Emissions And Newer
IMPACT 4.07.82
11/30/2020
25051-2 Smoke Test for Leak Detection
You must read and understand the precautions and guidelines in Service Information, Function Group 20, "Engine
Safety Practices" before performing this procedure. If you are not properly trained and certified in this procedure, ask
your supervisor for training before you perform it.
HD PowerSmokeTM Kit
Description
Item
QTY
1 PowerSmokeTM Machine
1
2 PowerSmokeTM Seal (with pass through
2
3
smoke tube)
Safety Chain
2
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
2 / 37
IMPACT 4.07.82
4
5
6
7
8
Retention Hoop
Block-Off Plug
Quick Connect Adaptors
High Intensity Halogen Inspection Light
“Y” Tube
11/30/2020
1
1
2
1
1
1
Park the vehicle on a flat and level surface.
2
Apply the parking brake.
3
Place the transmission in neutral or park.
4
Install the wheel chocks on the rear wheels.
5
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
3 / 37
IMPACT 4.07.82
11/30/2020
Disconnect the cable from the battery’s negative terminal.
6
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
4 / 37
IMPACT 4.07.82
11/30/2020
Open the hood.
7
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
5 / 37
IMPACT 4.07.82
11/30/2020
Remove the air intake tube.
8
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
6 / 37
IMPACT 4.07.82
11/30/2020
Install the block off plug (5) onto the air seal pas through smoke tube as shown.
9
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
7 / 37
IMPACT 4.07.82
11/30/2020
Attach the air seal (2) safety chain (3) to the charge air piping.
10
Insert the air seal into the lower air boot at the engine turbo.
Note: Ensure the clamp on the lower air boot connected to the engine turbo is tight enough to properly seat the air seal.
11
Using an air compressor, Inflate the air seal until the lower boot is properly sealed off.
Note: The air seal is equipped with an air supply tube and a pass through smoke tube. Use the air supply tube to
inflate the seal.
12
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
8 / 37
IMPACT 4.07.82
11/30/2020
Attach the high intensity flashlight leads to the battery terminals.
13
Attach the air supply hose to the back of the HD PowerSmokeTM tool (1) and plug the tool into a power supply using
the supplied A/C power cord.
Note: Ensure the polarity is correct or the tool will not operate.
14
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
9 / 37
IMPACT 4.07.82
11/30/2020
Remove the Exhaust Gas Recirculation (EGR) temperature sensor from the crossover pipe.
15
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
10 / 37
IMPACT 4.07.82
11/30/2020
Install the adapter (6) in the EGR temperature sensor port, and hand tighten the adapter to ensure no leaks are
permitted.
16
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
11 / 37
IMPACT 4.07.82
11/30/2020
Attach the HD PowerSmokeTM vapor supply hose (1) to the adapter (6).
17
Activate the PowerSmoke tool. Turn the flow control on. With machine set to 5 PSI, supply vapor to the intake and
EGR system to purge system of any fresh air. When vapor is emitted from the connector on the air seal, the system is
purged of all fresh air. Install the block off plug onto the air seal at this time.
18
While increasing the pressure as needed, check the intake and EGR system for visible leaks using high intensity
flashlight. If no leaks are found within 8 minutes, the system is considered to be leak free.
Note: DO NOT exceed 18 psi during this operation.
19
For the remainder of testing, the air seal will be left in the lower air boot.
Note: This begins the exhaust side portion of the leak detection testing.
20
Deactivate the HD PowerSmokeTM tool at this time.
21
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
12 / 37
IMPACT 4.07.82
11/30/2020
Remove the vapor supply hose (1) from EGR temperature sensor port adapter (6).
22
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
13 / 37
IMPACT 4.07.82
11/30/2020
Remove the adapter (6) from the EGR temperature sensor port.
23
Copyright to this documentation belongs to the Volvo
Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
14 / 37
IMPACT 4.07.82
11/30/2020
Install the EGR temperature sensor into the port as shown. Tighten the sensor to 45 ± 4.5 Nm (33 ± 3.3 ft-lb).
24
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
15 / 37
IMPACT 4.07.82
11/30/2020
Remove the T1 temperature sensor from the Diesel Particulate Filter (DPF).
25
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
16 / 37
IMPACT 4.07.82
11/30/2020
Install the adapter (6) in the T1 port. Hand tighten the adapter to ensure no leaks are permitted.
26
Connect the HD PowerSmokeTM vapor hose (1) to the adapter (6) at the T1 sensor port.
27
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
17 / 37
IMPACT 4.07.82
11/30/2020
Activate the HD PowerSmokeTM tool. Starting at 5 psi, gradually increase the test pressure as needed or up to 10 psi
for accurate leak detection. Allow the tool to operate for 8 minutes. If vapor is visible with the high intensity flashlight
from the exhaust pipe at the muffler, a cracked DPF is suspected.
28
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
18 / 37
IMPACT 4.07.82
11/30/2020
Remove the vapor supply hose from the T1 sensor port.
29
Install the block off plug (5) onto the second air seal pass through smoke tube.
30
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
19 / 37
IMPACT 4.07.82
11/30/2020
Install the exhaust stack retention hoop (8) onto the air seal safety chain.
31
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
20 / 37
IMPACT 4.07.82
11/30/2020
Install the air seal in the exhaust pipe.
32
Using an air compressor, inflate the air seal inside exhaust pipe until the air seal is properly seated.
33
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
21 / 37
IMPACT 4.07.82
11/30/2020
Remove the T3 temperature sensor at the DPF outlet.
34
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
22 / 37
IMPACT 4.07.82
11/30/2020
Install the adapter (6) at the T3 port in the DPF outlet. Hand tighten the adapter to ensure no leaks are permitted.
35
Attach the “Y” hose to the adapters at the T1 and T3 ports on the DPF.
36
Connect the HD PowerSmokeTM vapor hose to the “Y” adapter as shown.
37
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
23 / 37
IMPACT 4.07.82
11/30/2020
Activate the HD PowerSmokeTM tool Starting at 5 psi, gradually increase test pressure as needed or up to 10 psi for
accurate leak detection. Block the Selective Catalyst Reduction (SCR) drain if necessary. Using the high intensity
flashlight, check the exhaust system for leakage. If no leaks are found after 8 minutes, system is considered to be leak
free.
Note: It is considered normal for vapor to be visible from SCR drain during testing.
38
Deactivate the HD PowerSmokeTM tool.
39
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
24 / 37
IMPACT 4.07.82
11/30/2020
Remove the “Y” hose from the T1 and T3 ports on the DPF. Remove the HD PowerSmokeTM vapor hose from the “Y”
adapter as shown.
40
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
25 / 37
IMPACT 4.07.82
11/30/2020
Remove the adapter (6) from the T3 port.
41
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
26 / 37
IMPACT 4.07.82
11/30/2020
Remove the adapter (6) from the T1 port.
42
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
27 / 37
IMPACT 4.07.82
11/30/2020
Install the T3 temperature sensor into the port as shown. Tighten the sensor to 45 ± 4.5 Nm (33 ± 3.3 ft-lb).
43
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
28 / 37
IMPACT 4.07.82
11/30/2020
Install the T1 temperature sensor into the port as shown. Tighten the sensor to 45 ± 4.5 Nm (33 ± 3.3 ft-lb).
44
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
29 / 37
IMPACT 4.07.82
11/30/2020
Deflate and remove the air seal from the exhaust pipe.
45
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
30 / 37
IMPACT 4.07.82
11/30/2020
Deflate and remove the air seal from the lower air boot at the engine turbo.
46
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
31 / 37
IMPACT 4.07.82
11/30/2020
Remove the safety chain from the charge air piping.
47
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
32 / 37
IMPACT 4.07.82
11/30/2020
Install the intermediate air intake tube.
48
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
33 / 37
IMPACT 4.07.82
11/30/2020
Tighten the air compressor inlet hose clamp to 3.9 ± 0.5 Nm (35 ± 5 in-lb).
49
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
34 / 37
IMPACT 4.07.82
11/30/2020
Tighten the intermediate air pipe clamps to 9 ± 1 Nm (80 ± 9 in-lb).
50
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
35 / 37
IMPACT 4.07.82
11/30/2020
Connect the cable to the battery’s negative terminal.
51
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
36 / 37
IMPACT 4.07.82
11/30/2020
Close the hood.
52
Remove the wheel chocks from the rear wheels.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
37 / 37
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: KC-2020
Replacement Service Bulletin Number:
MFR Communication Date: 2020-11-30
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.