NHTSA ID Number: 10183339
Manufacturer Communication Number: KC-183
TSB/Document Date: 2020-12-01
Summary
Volvo Chassis - ( AMT, I-Shift ) - Transmission Grinding When Downshifting ; Range Synchronizer (Synchro) Timing Procedure - US07 And Newer
11/30/2020
Content creation stages KC-183
Volvo
Chassis - ( AMT, I-Shift ) - Transmission
Grinding When Downshifting ; Range
Synchronizer (Synchro) Timing Procedure - US07
Related links and
And Newer
attachments
:
FSB 431-010
Internal Content
Repair information was released with FSB 431-010 Range
Synchronizer, Repair and can be found in Impact.
1. Navigate to the Service tab.
2. In the Additional Search Values box, make sure Titles is selected in the
top box.
3. Enter 431-010 into the text entry box, press the Search button.
4. A link for the bulletin will be shown in the results. Click on the title,
then choose one of the options from the window that opens.
NOTE: The symptoms and issue described in this solution can apply to
AMT models other than AMT-D. If a vehicle presents the same
symptoms the FSB should be used as part of diagnosis.
a
Tags
K81654757
AMT-C
AMT-D
AMT-F WITH CRAWLER GEARS
AMT-F WITHOUT CRAWLER GEARS
GRINDING
FSB 431-010
1/2
11/30/2020
Content creation stages KC-183
Give feedback to help improve the content of this article
2/2
IMPACT 4.07.82
11/12/2020
FSB 431-010, Range Synchronizer, Repair
(October 2017)
This procedure is to repair mDrive transmissions in the field that exhibit a grinding noise when the transmission range
shifts (for example: between 6th and 7th gear) built between 01/01/2013 and 08/18/2014.
Required Parts
I-Shift Range Synchronizer Repair Kit, Part Number 85020354
TECU main software equal to or greater than 23084204
Optional Parts
Note: The assembly should be disassembled and inspected before ordering optional parts.
Range Shift Fork, Part Number 21510395
Set Screws, Part Number 1652847
Required Tools
Special tools: 9809726, 9990027, 9992619, 9992671, 9992884, 9996315, 9996876, 9996889, 9996917, 9998051,
9998542, 85108826, 88800015
Premium Tech Tool version 2.06.20 or higher
Vocom Diagnostic Connector 88890304 or 88890253
Communication Interface 88890300
Note: Using other interfaces may affect programming speed.
Note: Check Premium Tech Tool version by clicking on Help tab and then click on “About Tech Tool”.
Failed Parts
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
2 / 38
IMPACT 4.07.82
11/12/2020
The synchronizer ring is missing the high range friction material and the low range side is wearing away.
Procedure
You must read and understand the precautions and guidelines in Service Information, Function Group 40, "General
Safety Practices, Transmission" before performing this procedure. If you are not properly trained and certified in this
procedure, ask your supervisor for training before you perform it.
Danger
Do not attempt to repair or service this vehicle without having sufficient training, the correct service literature and
the proper tools. Failure to follow this could make the vehicle unsafe and lead to serious personal injury or death.
Danger
Before beginning any work on any part of the air system, be certain that the air pressure has been released.
Failure to do so may cause a component to violently separate, which can result in serious personal injury.
Note: Special tools: 9809726, 9990027, 9992619, 9992671, 9992884, 9996315, 9996876, 9996889, 9996917,
9998051, 9998542, 85108826, 88800015
1. Use Premium Tech Tool (PTT) to perform operation 4000-08-03-11 Gear activation, control housing (for removal
/replacement). Follow the instructions in PTT.
Note: If Tech Tool is unable to activate the necessary gears for control housing removal, follow the manual activation
steps outlined in this procedure after transmission removal.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
2.
3 / 38
IMPACT 4.07.82
11/12/2020
2. Secure the vehicle for service by parking it on a flat level surface, applying the parking brake, chocking the rear wheel,
and placing the transmission in neutral.
3. Disconnect all cables from the negative (ground) battery terminals to prevent personal injury from electrical shock and
prevent damage to electrical components.
4. Drain the air system.
5. Raise the vehicle and support with jack stands.
6. Drain the transmission oil into a suitable container.
Warning
Hot transmission oil can cause burns. DO NOT allow hot transmission oil to contact the skin. When changing
transmission oil, wear protective gloves.
Caution
Always dispose of lubricants (engine oil, coolant, transmission oil, etc.) and filters according to Federal or local
regulations. Dumping used oil or coolant on the ground or in waterways can contaminate our drinking water and
kill wildlife.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
4 / 38
IMPACT 4.07.82
11/12/2020
7. Remove the transmission. Refer to Function Group 431.
8. Remove the control housing mounting bolts.
9. Remove the six TECU mounting bolts.
Note: It is only necessary to perform this step if manually performing the Gear activation, control housing (for removal
/replacement). If PTT activated the necessary gears, proceed to step 1.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
5 / 38
IMPACT 4.07.82
11/12/2020
10. Manually perform the Gear activation, control housing (for removal/replacement) as outlined in the next three steps.
Note: The next three steps are performed only if Tech Tool could not activate the necessary gears for control housing
removal.
11.
Caution
Electrical components, including the wiring harness inside the transmission control housing, are delicate. Handle
with extreme care. Failure to do so may result in damage to components.
Gently lift the top edge of the upper cover and angle it down carefully against the clutch housing. Carefully disconnect
the electrical connection and remove the top cover.
Note: Do not apply tension or weight to the wiring harness or connector.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
6 / 38
IMPACT 4.07.82
11/12/2020
12. Using compressed air, apply air pressure to the appropriate bore holes to place the transmission gears in the proper
position for control housing removal.
Note: It is necessary to rotate the input shaft while engaging the splitter section to mesh the gears.
Note: It is necessary to rotate the output shaft while engaging the range section to mesh the gears.
Note: It is necessary to rotate the output or input shaft while engaging reverse to mesh the gears.
Note: For over drive transmissions, the transmission must be positioned as follows:
* Low Split
* High Range
* 2nd/3rd — Neutral Position
* 1st/Reverse — Reverse Position
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
7 / 38
IMPACT 4.07.82
11/12/2020
Over Drive Transmission
1 – High Range
2 – 3rd Gear
3 – Low Range
4 – 2nd Gear
5 – 1st Gear
6 – High Split
7 – Reverse Gear
8 – Low Split
Note: For direct drive transmissions, the transmission must be positioned as follows:
* High Split
* High Range
* 2nd/3rd — Neutral Position
* 1st/Reverse — Reverse Position
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
8 / 38
IMPACT 4.07.82
11/12/2020
Direct Drive Transmission
1 – High Range
2 – 3rd Gear
3 – Low Range
4 – 2nd Gear
5 – 1st Gear
6 – Low Split
7 – Reverse Gear
8 – High Split
Note: If 2nd or 3rd gear is engaged, it will be necessary to position that gear set to neutral before attempting to engage
reverse.
Note: To engage neutral for the 2nd/3rd gear set, it will be necessary to gently apply air to the bore holes. If too much
air is applied, it will engage one of the two gears. To aid positioning, do not rotate the shaft when attempting to position
this gear set.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
9 / 38
IMPACT 4.07.82
11/12/2020
13.
Caution
Gentle consistent pressure should be used to lift the control housing from the transmission. Applying excessive
force is not necessary or needed, and may result in damage to components.
Caution
Always install the alignment pins before removing the control housing to prevent damage to the transmission
main shaft speed tone ring and the shift control.
Note: Use tool 9996876.
Install the alignment pins through the control housing into the transmission. Using a pry bar, gently separate the
control housing from the locating pins on the transmission, then remove the control housing.
Note: If the control housing does not separate from the transmission while applying gentle pressure upward, it may be
necessary to refer back to Step 11 or Step 12 before attempting control housing removal again.
Note: Exercise care during removal to keep from damaging the tooth wheel in the transmission.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
10 / 38
IMPACT 4.07.82
11/12/2020
14. Remove the plug, spring and plunger for the range function. If necessary use a magnet to pull out the plunger.
15. Remove the range housing mounting fasteners.
16. Use press tool to separate the main housing and range housing.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
11 / 38
IMPACT 4.07.82
11/12/2020
1. 9998051
17. Carefully lift the range housing away from the main housing.
Caution
Ensure that the range cylinder piston rod does not jam in the main housing. Damage to the shaft may result.
18. Remove the range gear fasteners.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
12 / 38
IMPACT 4.07.82
11/12/2020
19. Mark the orientation of the fork shaft to the synchronizer ring. Remove the range gear.
Note: Gear must be in high range for removal. If difficult to remove, lift on the shaft and tap down on the housing with a
dead blow hammer.
20. Remove the selector fork. Check the brass shifter pads. If the brass shifter pads are damaged or worn, replace the
fork. Tighten the set screws to 75 ±7 Nm (55 ±5 lb-ft) and stake set screws.
Note: After staking, set screws are one time use only.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
13 / 38
IMPACT 4.07.82
11/12/2020
The fork should be replaced if there is this type of damage.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
14 / 38
IMPACT 4.07.82
11/12/2020
Properly Staked Set Screws
21. Remove the oil return pipe.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
15 / 38
IMPACT 4.07.82
11/12/2020
22. Remove the retaining ring.
23. Remove the washer.
24. Install the puller rings.
25. Install one half of the puller on puller rings together with the hydraulic cylinder, spindle and drift.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
16 / 38
25.
IMPACT 4.07.82
11/12/2020
Note: Check that the divide in the puller rings is at 90° to the divide in the puller.
1. 88800015
2. Puller Ring
3. 9998542
4. 90° Position for Tool
5. Tool Set on Puller Ring
26. Install the other half of the puller and the hydraulic pump. Remove the high range engaging ring.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
17 / 38
IMPACT 4.07.82
11/12/2020
26.
- CUTTING EDGE TECHNOLOGY - Shockproof technology designed to...
- QUIET SMOOTH SHIFTING - V-Twin Transmission oil dampens...
- IMPROVES PERFORMANCE - Transmission fluid that dramatically...
- POPULAR POWESPORTS OIL FOR - UTVs & Side by Sides, ATVs...
- WHY RED LINE - Established in 1979, Red Line Products...
- CUTTING EDGE TECHNOLOGY - Shockproof technology designed to...
- QUIET SMOOTH SHIFTING - V-Twin Transmission oil dampens...
- IMPROVES PERFORMANCE - Transmission fluid that dramatically...
- POPULAR POWESPORTS OIL FOR - UTVs & Side by Sides, ATVs...
- WHY RED LINE - Established in 1979, Red Line Products...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: KC-183
Replacement Service Bulletin Number:
MFR Communication Date: 2020-11-12
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.