NHTSA ID Number: 10180686
Manufacturer Communication Number: 15-261-20R
TSB/Document Date: 2020-10-05
Summary
The following information announces reprogramming file availability and provides a software update installation procedure to optimize the new Gen 4 Denso CP1 Audio and Navigation head units.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-261-20R
Replacement Service Bulletin Number:
MFR Communication Date: 2020-09-09
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
ATTENTION:
GENERAL MANAGER
q
PARTS MANAGER
q
CLAIMS PERSONNEL
q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
q
© 2020 Subaru
of America, Inc. All rights reserved.
SERVICE BULLETIN
APPLICABILITY:
2020MY Legacy and Outback Models
NUMBER: 15-261-20R
SUBJECT:
Reprogramming File Availability for Optimization
DATE: 03/10/20
of Gen 4 Denso CP1 Infotainment Systems
REVISED: 09/09/20
INTRODUCTION:
The following information announces reprogramming file availability and provides a software
update installation procedure to optimize the new Gen 4 Denso CP1 Audio and Navigation head
units utilized in the models listed above. As in previous models, the procedure will involve either
downloading the software update files from Subarunet or using those sent directly from Nuspire to
the SDS Notebook and transferring them onto a USB flash drive for head unit installation.
It is VERY IMPORTANT to read and understand this information completely before proceeding.
A time line chart along with a complete list of all the conditions addressed and enhancements
included in this and previous Denso software updates are provided in “Appendix B” and
“Appendix C” located at the end of this bulletin.
IMPORTANT NOTE: There are 4 (FOUR) FILES required to complete this update. ALL 4
update files MUST BE DOWNLOADED TOGETHER to the USB Flash Drive before starting
the update. PERFORMING THIS UPDATE USING A USB FLASH DRIVE WITH ANY OF
THE REQUIRED UPDATE FILES MISSING WILL LEAD TO A NON-RECOVERABLE
FAILURE OF THE COCKPIT CONTROL MODULE (CCU) REQUIRING CCU
REPLACEMENT.
PART INFORMATION:
NOTE: High Level unit is equipped with Navigation option
(Map icon on Home screen)
ATTENTION
11.6-Inch Display, Mid and High Level Units
The software in the STARLINK® Multimedia system on this vehicle has been recently updated. The
current “STARLINK® Multimedia Owners Manual” and the “Getting Started Guide” in the vehicle, may
not reflect the latest changes in features and functionality of the STARLINK® Multimedia system.
Subaru of America will have an updated electronic supplement to your “STARLINK® Multimedia
manual” and “Getting Started Guide” available on-line as of June 30th.
You can download the electronic supplements by visiting us at:
https://www.subaru.com/owners/index.html
You can also request a printed copy of the supplements by writing us at:
https://www.subaru.com/customer-support.html
Also, you can contact us at 1-800-SUBARU3 (1-800-782-2783)
Dual 7.0-Inch Display, Base Level Unit
MSA5M2001C
Bulletin Number: 15-261-20R; Revised: 09/09/20
Continued...
Page 1 of 21
Materials Required:
An empty, USB 2.0 or 3.0 storage device (flash drive) will be needed to perform the update
procedure. The device should be dedicated to storing and transferring these updating files only. It
must be a minimum of 16GB or more in size and contain a NTFS file format before downloading the
update files onto it. Be sure to locate and re-format any existing USB drives used for updating audio
units. They must be fully cleared before adding these new update files to them.
IMPORTANT NOTES:
•
NEVER change the update file names after downloading them.
•
NEVER save any other files on the same flash drive.
There are various types of USB flash drive available from many suppliers. If the head unit does
NOT recognize the USB drive during the reprogramming process due to Controller IC type of USB
drive or Compatibility with the head unit, confirm the flash drive format is NTFS. The flash drive
must be formatted for NTFS. If a recognition problem persists, use a USB flash drive from another
manufacturer.
•
Kingston®:
DataTraveler G3 Series DataTraveler 100 G3 DT100G3
DataTraveler SE9 Series DataTraveler SE9 G2 3.0 DTSE9G2
Digital Data Traveler 3.0 USB Flash Drive - Violet DTIG4
•
SanDisk®:
Ultra Series SDCZ48-064G-J57
Cruzer Blade Series
Cruzer Glide Series CZ60 SDCZ60-064G-B35
•
Transcend®:
JetFlash 790 Series TS64GJF790KBE
•
PNY®:
Retract USB 3.0 Flash Drive, black (P-FD64GTRTC-GE)
•
Silicon Power®:
2 Pack USB 3.0/3.1 Gen1 USB Flash Drive Blaze B02
Continued...
Bulletin Number: 15-261-20R; Revised: 09/09/20
Page 2 of 21
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
STEP 1- VERY IMPORTANT: Before proceeding with the software updating procedure, the
currently installed software version ID MUST be confirmed by following the steps below:
1a) After starting the engine and system boot-up completes, from the HOME screen, touch the
Settings button.
1b) Press the General button. Use the down arrow to scroll to System Information then press to
display the System Information / Version information.
The examples below identify the head unit model and the last 6 digits signify the software version
number. Examples:
•
F11GHMxxx-xxx (High model software)
•
F11GMMxxx-xxx (Mid model software)
•
F11GBMxxx-xxx (Base model software)
If the software version number is 020-501, 020-502, 020-704, 021-503 or 021-704, proceed to
STEP 2 below. If the software version is 022-504 or higher, STOP as the unit already has the latest
software version installed. Proceed to the WARRANTY / CLAIM INFORMATION section of the
TSB and process a Version Check Only claim.
Continued...
Bulletin Number: 15-261-20R; Revised: 09/09/20
Page 3 of 21
STEP 2- Prepare the USB:
CAUTION: Do not use any USB flash drive which utilizes file organizing software or an operating
system.
VERY IMPORTANT: Before attempting to download any data files, confirm the PC and flash drive
being used is not infected with any virus. The flash drive MUST be formatted for NTFS.
•
Make sure the USB flash drive contains no other
files.
•
Right click on the corresponding “Removable
Disk”.
•
Select “Format”.
•
From the File System drop-down menu, select
“NTFS”
•
Check the “Quick Format” box (if not already
done).
•
Click on “Start” to format the USB flash drive.
STEP 3- Download the Update Files to the USB:
The files are available for download on Subarunet (see “A” below).
The applicable reprogramming files have also been sent directly to retailers by Nuspire in the same
way a Select Monitor Update would be pushed out. (see “B” below).
Follow “A” when using files downloaded from Subarunet.
Follow “B” when using the files sent directly to the SDS notebook from Nuspire.
“A” When using update files downloaded from Subarunet:
Click Here to Access the Downloads
for Audio/Navigation
Information on Subarunet
Continued...
Bulletin Number: 15-261-20R; Revised: 09/09/20
Page 4 of 21
IMPORTANT: Files downloaded from Subarunet will be .zip files and must be unzipped before they
can be used. Using the normal audio / navigation system file update download procedure: Go to
Subarunet, select Service Operations and Technical>>Forms/Downloads>>Gen 4/Denso for Audio/
Navi then click on the applicable Hyperlink to download the file(s) to your SDS Notebook or PC:
BASE-20-Legacy-Outback-Denso-CP1 AUDIO UPDATE-JUNE 2020
MID-20-Legacy-Outback-Denso-CP1 AUDIO UPDATE-JUNE 2020
HIGH-20-Legacy-Outback-Denso-CP1 AUDIO UPDATE-JUNE 2020
•
Go to Downloads.
•
CAUTION: After download is complete, NEVER change the file or folder names.
•
Open / display the contents of File folder, for example: “CP1DensoBASE.zip”.
•
Click on “Extract All Files”.
•
The screen below will appear to set a destination for the extracted file.
•
Double-click on the required file (for this example, select the file entitled “BASE”).
Continued...
Bulletin Number: 15-261-20R; Revised: 09/09/20
Page 5 of 21
•
Copy all files then paste (or click / drag) it to the “clean” USB flash drive as listed
(Removable Disk) in the directory.
IMPORTANT REMINDER: There are 4 (FOUR) FILES required to complete this update.
ALL 4 update files MUST BE DOWNLOADED TOGETHER to the USB Flash Drive
before starting the update. PERFORMING THIS UPDATE USING A USB FLASH DRIVE
WITH ANY OF THE REQUIRED UPDATE FILES MISSING WILL LEAD TO A NONRECOVERABLE FAILURE OF THE COCKPIT CONTROL MODULE (CCU) REQUIRING
CCU REPLACEMENT.
•
To avoid confusion, use a permanent marker to label the flash drive with the file contents (e.g.
BASE Denso CP1, MID Denso CP1 or HIGH Denso CP1).
•
Go to Step 4.
“B” When using update files sent directly from Nuspire:
•
Go to My Documents on the GUI screen click on the folder “Denso CP1 Audio-Navi Update
Files” to display the list of available update files shown below.
•
CAUTION: After download is complete, NEVER change the file or folder names.
•
Double-click on the required folder (for this example, select the file entitled “BASE”) and the
update file will display as shown.
•
Select all files and either copy / paste or click / drag it to the USB flash drive.
•
Once all files have been loaded onto the USB flash drive, right click on the drive and select
“Eject”.
•
Remove the USB flash drive after the prompt appears that says “Safe to Remove Hardware”.
•
Mark the USB to indicate the head unit it will update (BASE Denso CP1 in this example).
•
Repeat the above steps to create the BASE or MID Denso CP1 and HIGH Denso CP1 USB
flash drives as needed using a separate USB drive for each update folder.
•
Proceed to STEP 4 below.
Continued...
Bulletin Number: 15-261-20R; Revised: 09/09/20
Page 6 of 21
STEP 4- Perform the software update.
CAUTIONS:
•
Do not attempt to install the software immediately following an exchange installation.
Let the system restart first and operate for 20 minutes.
•
Do not attempt to install the software a second time for 30 minutes following prior
software installation.
•
Do not attempt to install the software for at least 30 minutes after completing a FOTA
update.
4a) Perform the update in a well ventilated location if updating with the engine running OR with
the ignition ON and a battery charger connected.
4b) PRESS and HOLD the RIGHT-side temperature control buttons (both up and down)
and press the Tune / Scroll knob 6 times then release all to display the Dealership Mode
Menu.
High/Mid
Base
4c) Select Software Update from the Dealership Mode menu.
High/Mid
Base
Continued...
Bulletin Number: 15-261-20R; Revised: 09/09/20
Page 7 of 21
IMPORTANT NOTE: On a RARE occasion, the message “Software update setup is initializing…”
may be displayed. Should this occur, proceed to “Appendix A” starting on pg. 12 of this bulletin
for further instruction. For critical Service Bulletin helpful tips to prevent unnecessary hardware
replacement, follow the link to an important Subarunet message: https://www.subarunet.com/home/
home.html#/Announcement/83194.
4d) The screen below will be displayed.
High/Mid
Base
4e) Insert the H/U reprogramming USB into the USB port and press OK.
NOTE: If after plugging in the USB, the screen displays a Software Loading Unsuccessful
message, confirm the USB device has been properly formatted and the the software on the device
matches the H/U being reprogrammed (example: Base software is being used to update a Base H/U).
High/Mid
Base
NG
OK
NG
OK
Continued...
Bulletin Number: 15-261-20R; Revised: 09/09/20
Page 8 of 21
4f) The screen below will be displayed. Press OK to start the software update.
NOTE: The actual software version displayed will be different from the picture shown below.
High/Mid
Base
Please refer to
the following
table.
Please refer to
the following
table.
Software Version Table
Current Version
Current Version
Model
MSOC Version
Model
MSOC Version
High
F11GHM020-501 or F11GHM020-502 or
F11GHM021-503
Base
F11GBM020-501 or F11GBM020-502 or
F11GBM021-503
F11GMM020-501 or F11GMM020-502 or
F11GMM021-503
Available Version
Mid
Model
MSOC Version
High
F11GHM022-504
Mid
F11GMM022-504
High/Mid
Model
MSOC Version
Base
F11GBM022-504
Current Version
Current Version
Model
Available Version
DSP Version
Model
DSP Version
02.04.03
Base
02.04.03
Available Version
Available Version
Model
DSP Version
Model
DSP Version
High/Mid
02.04.03
Base
02.24.06
Current Version
Current Version
Model
VCPU Version
Model
VCPU Version
High/Mid
F11GHV020-500
Base
F11GHV020-500
Available Version
- 💝【Questions? We’re Here Anytime】MK808S is a high-end flagship model that connects via wired OBD2 for faster, more stable, and reliable diagnosis compared to B,.T tools. If you have any questions about setup, activation, features, additional accessories, or update subscriptions, please reach us and we will respond promptly to assist you. It includes 1-Year F.ree Updates (124.5 bucks/year after), and most functions still work after expiration except a few online features. Please note some functions like full TPMS are not supported, reach us for model recommendations.
- 🔥🔥🔥【2026 NEWLY RELEASED BI-DIRECTIONAL CONTROL】As the 2026 upgraded version of MaxiChek MX808 MaxiDiag MD909 Pro MD906 Pro, our Newest MK808S auto diagnostic scanner for all cars inherits the powerful Bi-directional Control which makes it the most cost-effective scanner (without breaking the bank, same as MK900BT MS906 PRO MS906MAX). Active test is widely used on car subsystems to help you check if the car actuators are all in good condition. Such as windows, rear mirrors, sunroof, wipers...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel versatile OBDII scanenr MK808S, full level-up of MX808, work as MX900, MK900, MK900-BT, supports 150+ car brands worldwide. Like the OBD2 code reader MaxiCOM MK808BT Pro, MK808S is equipped with 28+ hot services including 0il Reset, SAS Calibration, ABS Bleeding, Battery Registration, etc. MK808S ranks top in professional automotive tablets and keeps updating to support more newer modes from 2025 to 2026.
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The MK808S dealer-level scanner, like Snap-on tools, effectively works all cars for all system diagnostics. It reads/clears codes, displays 5-in-1 Live Data, performs active tests, and special functions for all available modules. With a few clicks, you can easily understand the vehicle's condition. The convenient Wi-Fi printing feature allows you to generate a detailed report, highlighting the exact nature of the problem.
- 【AUT0 SCAN & AUT0V1N, 10X FASTER】How much have you spent on car maintenance? Even a minor issue can take up a significant amount of time. The MK808S is designed to improve your work efficiency. With its Aut0V1N technology, you can check your car's make, model, and year information with just one click. The Aut0Scan feature automatically scans all of the vehicle's modules and detects any fault codes. Check Aut0V1N compatibility by reaching us at 📞1-833-436-5880. Available Mon-Fri, 9 AM-6 PM EST.
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If you encounter Blueto-oth adapter VCI150 malfunction, please tell us 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API