NHTSA ID Number: 10180416
Manufacturer Communication Number: P040200
TSB/Document Date: 2020-09-30
Summary
Engine Exhaust Gas Recirculation 1 Valve Position Flow Excessive Detected
DTC:
Bulletin:
P0402-00
Date:
Description:
Applies to:
GDC20-058
August 03, 2020
Engine Exhaust Gas Recirculation 1 Valve Position
Flow Excessive Detected
US13 – US20 Emissions
For Spanish click here: ESPAÑOL
General Information
These repair instructions are intended to address the following fault(s):
DTC
Description
P0402-00
Engine Exhaust Gas
Recirculation
Differential Pressure
- Mechanical system
not responding
properly
Possible Cause
•
•
•
•
•
Connector
Wiring harness
EGR Valve
Charge air system leakage
EGR differential pressure sensor
Possible (Observable)
Symptoms
EGR mass flow above
calculated value
Required Parts
Part Number
Description
Quantity
22181342 / 22172068
(Depending on model year)
EGR Differential Pressure Sensor
1
9812483
Extractor Tool
1
Repair Instructions
EGR Differential Pressure Sensor, Replacement
Removal
1. Secure the vehicle for service by parking it on a flat level surface, applying the parking brake, chocking
the rear wheel, and placing the transmission in neutral.
2. Disconnect all cables from the negative (ground) and positive battery terminals to prevent personal injury
from electrical shock and prevent damage to electrical components.
3. Raise hood. Note: Some models may be equipped with fender extenders attached to the inner splash
guard. Remove these as an assembly.
© 2020 Mack Trucks
, Inc. Information is subject to change without notice.
Page 1/4
DTC:
P0402-00
Bulletin:
Date:
GDC20-058
August 03, 2020
4. Disconnect the wiring harness lead from the connector terminal on the EGR pressure differential sensor.
Loosen and remove the mounting bolts and remove the EGR pressure differential sensor from the venturi
tube. Note: Install new sealing rings when replacing the sensor.
Old Style EGR
Differential Pressure
New Style EGR
Differential Pressure
5. Clean the sealing surface where the EGR differential pressure sensor mounts into the EGR venturi tube.
Ensure that the ports of the venturi tube are fully open and free of debris.
Note: If the ports to the EGR differential pressure sensor are clogged check the entire EGR system for
clogging and debris. Clean the system as needed.
Installation
Note: If replacing an old style EGR differential pressure sensor with a new style sensor, perform Installation Steps
1 through 3. If replacing a new style EGR differential pressure sensor with a new style sensor, skip to Installation
Step 4.
Note: When installing the kit for the updated EGR differential pressure sensor for the D13 engine, the engine
harness connector pins will need to be relocated. The previous pin locations were:
• Pin 1 — Green/White
• Pin 2 — Brown
• Pin 4 — White/Brown
© 2020 Mack Trucks, Inc. Information is subject to change without notice.
Page 2/4
DTC:
P0402-00
Bulletin:
Date:
GDC20-058
August 03, 2020
Note: The new engine harness connector pin locations when replacing old style EGR differential pressure sensor
with the new style sensor in kit are:
• Pin 1 — Green/White
• Pin 2 — Brown/White
• Pin 3 — Brown
1. Clip applicable cable ties and remove P-clamps securing the EGR differential pressure sensor harness
leg.
2. Use extractor tool (part number 9812483) in kit 88890037 to relocate the engine harness connector pins.
Special tools: 9812483
3. Connect the EGR differential pressure sensor jumper harness to the engine harness.
4. Install the EGR differential pressure sensor.
5. Install the EGR differential pressure sensor fasteners. Tighten fasteners to specification. Refer to
Function Group 20, Specifications.
© 2020 Mack Trucks, Inc. Information is subject to change without notice.
Page 3/4
DTC:
P0402-00
Bulletin:
Date:
GDC20-058
August 03, 2020
6. Connect the EGR differential pressure sensor harness.
7. Install all previously removed cables to the ground (negative) battery terminals.
8. Due to the electronic control module (ECM) self-learning capability, it is necessary to reset learned ECM
parameters after servicing some engine related components. This allows the ECM to learn the new
components behavior. After servicing is complete, perform the “Learned Data Reset” using Tech Tool.
This is located in the Function Group 1 menu.
9. If applicable, install the inner splash guard assembly.
10. Close the hood.
Additional Resources
These repairs are the most likely fix for the identified fault, if this does not fix the issue, Tech Tool will need to be
used for more detailed diagnostics. If filing a warranty claim, please include the ASIST case number.
Labor Code
2939-03-02-01
0.4 – 0.6 (Depending on model)
Causal Part
22181342 / 22172068
© 2020 Mack Trucks, Inc. Information is subject to change without notice.
Page 4/4
DTC:
Boletín:
P0402-00
Fecha:
Descripción:
Se aplica a:
GDC20-032
03 de agosto de 2020
Exceso de flujo detectado en posición de válvula 1
de recirculación de gas de escape del motor
Emisiones de US13 - US17
Para inglés, haga clic aquí: ENGLISH
Información general
Estas instrucciones de reparación están destinadas a abordar las siguientes fallas:
DTC
Descripción
P0402-00
Presión de diferencial
de recirculación de gas
de escape del motor Sistema mecánico
no responde
adecuadamente
Causa posible
•
•
•
•
•
Conector
Arnés de cableado
Válvula EGR
Fuga en el sistema de aire de carga
Sensor de la presión diferencial
de EGR
Posibles síntomas
(observados)
Flujo de masa de
EGR sobre el valor
calculado
Piezas necesarias
Número de pieza
22181342 / 22172068
(Dependiendo del año del modelo)
9812483
Descripción
Cantidad
Sensor de presión diferencial de EGR
1
Herramienta de extractor
1
Instrucciones de reparación
Sensor de presión diferencial de EGR, Reemplazo
Desinstalación
1. Asegure el vehículo al estacionarlo en una superficie plana, aplicar el freno de estacionamiento, bloquear
la rueda trasera y poner la transmisión en neutro.
2. Desconecte todos los cables de los terminales positivos y negativos (tierra) de la batería para evitar
lesiones por descargas eléctricas y daños en los componentes eléctricos.
3. Levante el toldo. Nota: Algunos modelos pueden estar equipados con extensores de guardabarro a
la protección interna contra salpicaduras. Retírelas como un conjunto.
© 2020 Mack Trucks, Inc. La información está sujeta a cambios sin aviso previo.
Página 1/4
DTC:
P0402-00
Boletín:
Fecha:
GDC20-032
03 de agosto de 2020
4. Desconecte el terminal del arnés de cableado desde el terminal del conector en el sensor de presión
diferencial EGR. Afloje y retire los tornillos de montaje y retire el sensor de presión diferencial EGR
desde el tubo venturi. Nota: Instale los nuevos anillos de sellado cuando reemplace el sensor.
Sensor de presión
diferencial de EGR de
Sensor de presión
diferencial de EGR de
5. Limpie la superficie de sellado donde el sensor de presión diferencial de EGR se monta en el tubo venturi
EGR. Asegure que los puertos del tubo venturi estén totalmente abiertos y sin residuos.
Nota: Si los puertos al sensor de presión diferencial de EGR están obstruidos, revise el sistema EGR
completo en busca de obstrucciones y residuos. Limpie el sistema, según sea necesario.
Instalación
Nota: Si reemplaza un sensor de presión diferencial de EGR de estilo antiguo con un sensor de estilo nuevo,
realice los Pasos de instalación 1 a 3. Si reemplaza un sensor de presión diferencial de EGR de estilo nuevo
con un sensor de estilo nuevo, sale al Paso de instalación 4.
Nota: Cuando instale el kit para el sensor de presión diferencial de EGR actualizado en el motor D13, las clavijas
del conector del arnés del motor deben ser reubicadas. Las ubicaciones anteriores de las clavijas eran:
• Clavija 1 — Verde/Blanco
• Clavija 2 — Café
• Clavija 4 — Blanco/Café
© 2020 Mack Trucks, Inc. La información está sujeta a cambios sin aviso previo.
Página 2/4
DTC:
P0402-00
Boletín:
Fecha:
GDC20-032
03 de agosto de 2020
Nota: Las nuevas ubicaciones de las clavijas del conector del arnés del motor cuando reemplazan el sensor de
presión diferencial de EGR de estilo antiguo con el sensor de nuevo estilo en el kit son:
• Clavija 1 — Verde/Blanco
• Clavija 2 — Café/Blanco
• Clavija 3 — Café
1. Corte las amarras aplicables y retire las abrazaderas en P que aseguran la pata del arnés del sensor de
presión diferencial de EGR.
2. Utilice la herramienta de extractor (número de pieza 9812483) en kit 88890037 para reubicar las clavijas
del conector del arnés del motor. Herramientas especiales: 9812483
3. Conecte el arnés de puente del sensor de presión diferencial de EGR al arnés del motor.
4. Instale el sensor de presión diferencial de EGR.
5. Instale los sujetadores del sensor de presión diferencial de EGR. Apriete los sujetadores de acuerdo a
las especificaciones. Consulte Grupo de funciones 20, Especificaciones.
© 2020 Mack Trucks, Inc. La información está sujeta a cambios sin aviso previo.
Página 3/4
DTC:
P0402-00
Boletín:
Fecha:
GDC20-032
03 de agosto de 2020
6. Conecte el arnés del sensor de presión diferencial de EGR.
7. Instale todos los cables retirados anteriormente a los terminales negativos (tierra) de la batería.
8. Debido a la capacidad de autoaprendizaje del módulo de control electrónico (ECM), es necesario
restablecer los parámetros aprendidos de ECM después de reparar algunos componentes relacionados
con el motor. Esto permite que la ECM aprenda la nueva conducta de los componentes. Después de
terminar la reparación, realice el “Restablecimiento de datos aprendidos” usando Tech Tool. Esta se
encuentra en el menú del Grupo 1 de funciones.
9. Si es aplicable, instale el conjunto de protección interna contra salpicaduras.
10. Cierre el capó.
Recursos adicionales
Es muy probable que estas reparaciones solucionen la falla identificada; si esto no soluciona el problema, se
requerirá el uso de Tech Tool para diagnósticos más detallados. Si presenta una reclamación de garantía,
incluya el número de caso ASIST.
Código de trabajo
2939-03-02-01
0.5 – 0.6 (según la configuración)
Pieza causal
22181342 / 22172068
© 2020 Mack Trucks, Inc. La información está sujeta a cambios sin aviso previo.
Página 4/4
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: P040200
Replacement Service Bulletin Number:
MFR Communication Date: 2020-08-03
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.