MID-HINGE VENT REPLACEMENT FOR HEHR WINDOWS

WINDOWS

Purpose

This document outlines the procedure for replacing the mid-hinge vent for Hehr windows.

Safety

Read and understand all instructions before installing or operating this product. Adhere to all safety labels.

The "CAUTION" symbol above is a sign that a procedure has a safety risk involved and may cause
personal injury, product and/or property damage if not performed safely and within the parameters
set forth in this document.

Use appropriate personal protective equipment (PPE) for the procedure being performed.

Moving parts can pinch, crush or cut. Keep clear and use caution.

Resources Required

* Cordless or electric drill or screw gun * Pop rivet gun
+ Phillips screw bit + Ladder
- He" drill bit

Rev: 08.31.20 CCD-0003876

MID-HINGE VENT REPLACEMENT FOR HEHR WINDOWS

WINDOWS

Procedure

Remove the screw securing the handle, then remove handle from operator (Fig. 1A). Retain screw

and handle for re-installation.
Remove the screen by slightly lifting and pulling on the bottom of the screen frame. Once the bottom

screen springs are free, continue to slightly pull until the screen is free from the window. Gently
remove the screen over operator body (Fig. 1B). Retain for re-installation.

Handle

Operator

Rev: 08.31.20 CCD-0003876

MID-HINGE VENT REPLACEMENT FOR HEHR WINDOWS

WINDOWS

Remove operator using 3/16" drill bit. Drill out rivets, then lift and push operator from bracket and slide
arms from the rail (Fig. 1C). Retain operator for re-installation.

Remove vent section by opening the vent section slightly past 90 degrees. Apply forward pressure at
90 degrees and the vent section will disengage and come out (Fig. 2A).

Replace the vent section. With the vent section at 90 degrees to the window, install the vent hinge
portion into the mullion area (Fig 2B). As it contacts the back of the mullion, lift slightly and pull out on
the vent section until it locks into place.

After the vent is locked into place, rotate it to the closed position.
Install the operator and rivet into place.

Install screen.

Install handle and secure with screw.

As a supplier of components to the RV industry, safety, education and customer satisfaction are our primary concerns. Should you
have any questions, please do not hesitate to contact us at (574) 537-8900 or by email at [email protected]. Self-help tips,
technical documents, product videos and a training class schedule are available at Ici1.com or by downloading the MyLCl app.

Rev: 08.31.20 Page 3 CCD-0003876